[Tue May  8 11:38:07 2012] Detection parameters:
  Position = (358.9, 151.0) = 0 42 29.22 41 4 37.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1598.3 +/- 48.2
  Background counts = 30.7
  Rate = 0.08 +/- 0.002

[Tue May  8 11:38:24 2012] Off-axis axis estimate = 11.55'
[Tue May  8 11:46:40 2012] Using EEF radius (= 12.20 ")to estimate initial spatial extent for simple fitting
[Tue May  8 11:46:40 2012] Initial guess for spatial extent in simple fitting = 12.20"
[Tue May  8 11:46:40 2012] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.824
[Tue May  8 11:46:40 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 12.20"
[Wed May  9 03:34:24 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src17.ximg exists
[Wed May  9 03:34:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src17.csv
[Wed May  9 03:34:24 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src17_1.ximg exists
[Wed May  9 03:34:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src17.csv
[Wed May  9 03:34:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  9 03:34:26 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Wed May  9 03:34:26 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Wed May  9 03:34:26 2012] Fit fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Thu May 10 00:42:24 2012] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 15.256468 pixels away
[Thu May 10 00:42:25 2012] Vigneting correction estimate = 1.000000
[Thu May 10 00:42:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 10 00:42:25 2012] Assessing source extent using major
[Thu May 10 00:42:25 2012] Source does appear to be extended
[Thu May 10 00:42:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 10 00:44:42 2012] Using EEF radius (= 12.20 ")to estimate initial spatial extent for simple fitting
[Thu May 10 00:44:42 2012] Initial guess for spatial extent in simple fitting = 12.20"
[Thu May 10 00:44:42 2012] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.824
[Thu May 10 00:44:42 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 12.20"
[Thu May 10 17:41:43 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src17.ximg exists
[Thu May 10 17:41:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src17.csv
[Thu May 10 17:41:43 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src17_1.ximg exists
[Thu May 10 17:41:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src17.csv
[Thu May 10 17:41:43 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 17:41:45 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Thu May 10 17:41:45 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Thu May 10 17:41:45 2012] Fit fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Fri May 11 08:46:09 2012] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 15.256468 pixels away
[Fri May 11 08:46:09 2012] Source 18 is offset by 2.233427 and 5.053549 pixels which is larger than
2 X fitted extent = 1.464179 x 1.464179, not incorporating fit results
[Fri May 11 08:46:09 2012] Vigneting correction estimate = 1.000000
[Fri May 11 08:46:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 11 08:46:09 2012] Assessing source extent using major
[Fri May 11 08:46:09 2012] Source does appear to be extended
[Fri May 11 08:46:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 11 08:47:44 2012] Counts = 1598.301025, rescaling region sizes by 2.000000
[Fri May 11 08:47:44 2012] XMMSAS src. selection expression = ellipse(31175.040131, 13090.448792, 1305.000000, 1305.000000, 0.000000, X, Y)
[Fri May 11 08:47:44 2012] Writing source region out to fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src18_src.reg
[Fri May 11 08:47:44 2012] Extracting stamp from image fullrun_pn_xmm0505720401_pi300-10000_cl_sm2.00.img.gz, (284, 76) - (434, 226)
[Fri May 11 08:47:44 2012] XMMSAS bgd. selection expression = annulus(31175.040131, 13090.448792, 4350.000000, 8700.000000, X, Y) && !ellipse(34299.576843, 22586.184967, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33575.470703, 22438.273285, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27583.550140, 21524.688324, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24636.706600, 20861.062200, 454.911213, 454.911213, 0.000000, X, Y) && !ellipse(35050.304962, 20560.191849, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23451.233760, 19884.593600, 436.996013, 436.996013, 0.000000, X, Y) && !ellipse(31343.995200, 19576.173000, 449.311213, 449.311213, 0.000000, X, Y) && !ellipse(28525.405853, 20243.604828, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32514.146637, 16749.182709, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30231.907349, 11714.098862, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 11 08:47:44 2012] Writing fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src18.gif
[Fri May 11 09:41:14 2012] Mean detx,y = (9541.75, 10403.21) 
[Fri May 11 09:41:21 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 11 09:46:45 2012] Binned source spectrum to 10 counts/bin
[Fri May 11 09:46:46 2012] Setting source spectrum file to fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Fri May 11 09:46:46 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Fri May 11 18:16:52 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May 11 18:16:52 2012] rmf not generated due to insufficient counts
[Sat May 12 14:51:25 2012] Updating aperture counts using extracted products
[Sat May 12 14:51:25 2012] Error reading totcts from fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Sat May 12 14:51:31 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 12 14:51:31 2012] Using photon index=1.80, rate=0.0764, arf fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src18.arf
[Sat May 12 14:51:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 12 14:51:32 2012] Updating source flux to 5.3e-13
[Sat May 12 15:10:29 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting