[Tue May  8 11:38:06 2012] Detection parameters:
  Position = (279.3, 354.0) = 0 42 59.87 41 19 20.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2278.5 +/- 58.7
  Background counts = 77.0
  Rate = 0.2 +/- 0.004

[Tue May  8 11:38:24 2012] Off-axis axis estimate = 4.26'
[Tue May  8 11:46:40 2012] Using EEF radius (= 8.56 ")to estimate initial spatial extent for simple fitting
[Tue May  8 11:46:40 2012] Initial guess for spatial extent in simple fitting = 8.56"
[Tue May  8 11:46:40 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.027
[Tue May  8 11:46:40 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 8.56"
[Wed May  9 03:34:24 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src13.ximg exists
[Wed May  9 03:34:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src13.csv
[Wed May  9 03:34:24 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src13_1.ximg exists
[Wed May  9 03:34:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src13.csv
[Wed May  9 03:34:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  9 03:34:26 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Wed May  9 03:34:26 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Wed May  9 03:34:26 2012] Fit fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Thu May 10 00:42:24 2012] Spatial fit model total counts = 2779.370000, observed total counts = 2771.000000
[Thu May 10 00:42:24 2012] Offset between fit and detection position for source 13 = 0.110626 pixels
[Thu May 10 00:42:24 2012] 2779.880000 total counts/ 1253.640000 bgd. counts: snr = 43.105870
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.110626 pixels
  Position = (279.2, 353.9) = 0 42 59.91 41 19 20.1
  Extent = 5.2 (5.0-5.4)", rotation angle = 0
  Source counts = 1526.2 +/- 52.7
  Background counts = 1253.6
  Rate = 0.08 +/- 0.003
[Thu May 10 00:42:25 2012] Vigneting correction estimate = 1.000000
[Thu May 10 00:42:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 10 00:42:25 2012] Assessing source extent using major axis lower bound
[Thu May 10 00:42:25 2012] Source does appear to be extended
[Thu May 10 00:42:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 10 00:44:42 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 10 00:44:42 2012] Initial guess for spatial extent in simple fitting = 5.22"
[Thu May 10 00:44:42 2012] source mask rpix=1.2, npix_max = 11, mask sum = 16, frac = 1.384
[Thu May 10 00:44:42 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 5.22"
[Thu May 10 17:41:43 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src13.ximg exists
[Thu May 10 17:41:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src13.csv
[Thu May 10 17:41:43 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src13_1.ximg exists
[Thu May 10 17:41:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src13.csv
[Thu May 10 17:41:43 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 17:41:45 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Thu May 10 17:41:45 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Thu May 10 17:41:45 2012] Fit fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Fri May 11 08:46:09 2012] Spatial fit model total counts = 2779.370000, observed total counts = 2771.000000
[Fri May 11 08:46:09 2012] Offset between fit and detection position for source 13 = 0.000000 pixels
[Fri May 11 08:46:09 2012] 2779.880000 total counts/ 1253.640000 bgd. counts: snr = 43.105870
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.000000 pixels
  Position = (279.2, 353.9) = 0 42 59.91 41 19 20.1
  Extent = 5.2 (5.0-5.4)", rotation angle = 0
  Source counts = 1526.2 +/- 52.7
  Background counts = 1253.6
  Rate = 0.08 +/- 0.003
[Fri May 11 08:46:09 2012] Vigneting correction estimate = 1.000000
[Fri May 11 08:46:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 11 08:46:09 2012] Assessing source extent using major axis lower bound
[Fri May 11 08:46:09 2012] Source does appear to be extended
[Fri May 11 08:46:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 11 08:47:43 2012] Counts = 1526.240000, rescaling region sizes by 2.000000
[Fri May 11 08:47:43 2012] XMMSAS src. selection expression = ellipse(24240.731100, 30744.536200, 626.560818, 626.560818, 0.000000, X, Y)
[Fri May 11 08:47:43 2012] Writing source region out to fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src13_src.reg
[Fri May 11 08:47:43 2012] Extracting stamp from image fullrun_pn_xmm0505720401_pi300-10000_cl_sm2.00.img.gz, (243, 318) - (315, 390)
[Fri May 11 08:47:43 2012] XMMSAS bgd. selection expression = annulus(24240.731100, 30744.536200, 2088.536060, 4177.072120, X, Y) && !ellipse(29016.687164, 26780.979919, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(23430.686440, 33197.136000, 412.053612, 412.053612, 0.000000, X, Y) && !ellipse(25884.809296, 30312.758301, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25196.007080, 29876.194489, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28624.372200, 30057.663800, 409.476812, 409.476812, 0.000000, X, Y) && !ellipse(23304.660000, 29265.112400, 427.083212, 427.083212, 0.000000, X, Y) && !ellipse(27540.595140, 28748.590600, 465.684013, 465.684013, 0.000000, X, Y) && !ellipse(28243.794861, 28007.343262, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26096.434000, 27287.024000, 1146.072033, 1146.072033, 0.000000, X, Y) && !ellipse(27095.300873, 27268.870758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27710.288780, 26942.704400, 441.067213, 441.067213, 0.000000, X, Y) && !ellipse(25303.944641, 26744.059082, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24249.580000, 26798.260000, 635.284018, 205.886406, 110.941000, X, Y) && !ellipse(24578.771179, 26259.439240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25855.468800, 26359.339400, 364.104810, 364.104810, 0.000000, X, Y) && !ellipse(26792.909800, 26039.576200, 538.040015, 538.040015, 0.000000, X, Y) && !ellipse(22469.969025, 31920.747589, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26778.964752, 29253.523743, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28538.988983, 28733.676971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19412.000534, 28987.757965, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26673.862762, 28811.317993, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25312.666412, 28487.016785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24772.568000, 27839.438000, 1151.376033, 758.405622, 293.271000, X, Y) && !ellipse(23166.547821, 26904.080353, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 11 08:47:43 2012] Writing fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src13.gif
[Fri May 11 09:24:55 2012] Mean detx,y = (-4763.26, -2025.60) 
[Fri May 11 09:25:03 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 11 09:26:30 2012] Binned source spectrum to 10 counts/bin
[Fri May 11 09:26:31 2012] Setting source spectrum file to fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Fri May 11 09:26:31 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Sat May 12 14:51:24 2012] Updating aperture counts using extracted products
[Sat May 12 14:51:24 2012] Error reading totcts from fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sat May 12 14:51:31 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 12 14:51:31 2012] Using photon index=1.80, rate=0.0758, arf fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src13.arf
[Sat May 12 14:51:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 12 14:51:31 2012] Updating source flux to 2.6e-13