[Tue May  8 11:38:06 2012] Detection parameters:
  Position = (353.0, 357.1) = 0 42 31.39 41 19 40.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 695.4 +/- 36.8
  Background counts = 58.7
  Rate = 0.03 +/- 0.002

[Tue May  8 11:38:24 2012] Off-axis axis estimate = 5.81'
[Tue May  8 11:46:40 2012] Using EEF radius (= 9.33 ")to estimate initial spatial extent for simple fitting
[Tue May  8 11:46:40 2012] Initial guess for spatial extent in simple fitting = 9.33"
[Tue May  8 11:46:40 2012] source mask rpix=2.1, npix_max = 27, mask sum = 15, frac = 0.536
[Tue May  8 11:46:40 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 9.33"
[Wed May  9 03:34:24 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src11.ximg exists
[Wed May  9 03:34:24 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src11_1.ximg exists
[Wed May  9 03:34:24 2012] Fit fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src11 appears to have run properly
[Wed May  9 03:34:26 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Wed May  9 03:34:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src11.csv
[Wed May  9 03:34:26 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Wed May  9 03:34:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src11.csv
[Wed May  9 03:34:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 00:42:24 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 13.123711 pixels away
[Thu May 10 00:42:24 2012] Source 11 is offset by -5.130100 and -5.761562 pixels which is larger than
2 X fitted extent = 1.102607 x 1.102607, not incorporating fit results
[Thu May 10 00:42:25 2012] Vigneting correction estimate = 1.000000
[Thu May 10 00:42:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 10 00:42:25 2012] Assessing source extent using major
[Thu May 10 00:42:25 2012] Source does appear to be extended
[Thu May 10 00:42:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 10 00:44:42 2012] Using EEF radius (= 9.33 ")to estimate initial spatial extent for simple fitting
[Thu May 10 00:44:42 2012] Initial guess for spatial extent in simple fitting = 9.33"
[Thu May 10 00:44:42 2012] source mask rpix=2.1, npix_max = 27, mask sum = 15, frac = 0.536
[Thu May 10 00:44:42 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 9.33"
[Thu May 10 17:41:43 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src11.ximg exists
[Thu May 10 17:41:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src11.csv
[Thu May 10 17:41:43 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src11_1.ximg exists
[Thu May 10 17:41:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src11.csv
[Thu May 10 17:41:43 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 17:41:45 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Thu May 10 17:41:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src11.csv
[Thu May 10 17:41:45 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Thu May 10 17:41:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src11.csv
[Thu May 10 17:41:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 11 08:46:09 2012] Warning, spatial fit 11 centroid is now closest to src. 12
[Fri May 11 08:46:09 2012] Vigneting correction estimate = 1.000000
[Fri May 11 08:46:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 11 08:46:09 2012] Assessing source extent using major
[Fri May 11 08:46:09 2012] Source does appear to be extended
[Fri May 11 08:46:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 11 08:47:43 2012] XMMSAS src. selection expression = ellipse(30666.769287, 31015.656067, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 11 08:47:43 2012] Writing source region out to fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src11_src.reg
[Fri May 11 08:47:43 2012] Extracting stamp from image fullrun_pn_xmm0505720401_pi300-10000_cl_sm2.00.img.gz, (316, 320) - (391, 395)
[Fri May 11 08:47:43 2012] XMMSAS bgd. selection expression = annulus(30666.769287, 31015.656067, 1087.500000, 2175.000000, X, Y) && !ellipse(29016.687164, 26780.979919, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(29746.053600, 31680.450600, 409.197612, 409.197612, 0.000000, X, Y) && !ellipse(31847.782074, 30656.173065, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28624.372200, 30057.663800, 409.476812, 409.476812, 0.000000, X, Y) && !ellipse(28243.794861, 28007.343262, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30044.974701, 33711.591400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28538.988983, 28733.676971, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 11 08:47:43 2012] Writing fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src11.gif
[Fri May 11 09:22:25 2012] Mean detx,y = (814.24, -5284.22) 
[Fri May 11 09:22:30 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 11 09:22:55 2012] Binned source spectrum to 10 counts/bin
[Fri May 11 09:22:56 2012] Setting source spectrum file to fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Fri May 11 09:22:56 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Fri May 11 17:58:28 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May 11 17:58:28 2012] rmf not generated due to insufficient counts
[Sat May 12 14:51:24 2012] Updating aperture counts using extracted products
[Sat May 12 14:51:24 2012] Error reading totcts from fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sat May 12 14:51:31 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 12 14:51:31 2012] Using photon index=1.80, rate=0.0332, arf fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src11.arf
[Sat May 12 14:51:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 12 14:51:31 2012] Updating source flux to 2.2e-13
[Sat May 12 15:10:29 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting