[Tue May  8 11:38:21 2012] Detection parameters:
  Position = (301.7, 283.2) = 0 42 51.24 41 14 13.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 130.1 +/- 23.0
  Background counts = 123.1
  Rate = 0.008 +/- 0.001

[Tue May  8 11:38:24 2012] Off-axis axis estimate = 1.13'
[Tue May  8 11:46:40 2012] Using EEF radius (= 6.99 ")to estimate initial spatial extent for simple fitting
[Tue May  8 11:46:40 2012] Initial guess for spatial extent in simple fitting = 6.99"
[Tue May  8 11:46:40 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.901
[Tue May  8 11:46:40 2012] Giving source the simple spatial ID 99 for pass 0, mean size = 6.99"
[Wed May  9 03:34:26 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src99.ximg exists
[Wed May  9 03:34:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src99.csv
[Wed May  9 03:34:26 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src99_1.ximg exists
[Wed May  9 03:34:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src99.csv
[Wed May  9 03:34:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src99_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src99.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  9 03:34:28 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src99.ximg exists
[Wed May  9 03:34:29 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src99_1.ximg exists
[Wed May  9 03:34:29 2012] Fit fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src99 appears to have run properly
[Thu May 10 00:42:25 2012] Warning, spatial fit 99 centroid is now closest to src. 103
[Thu May 10 00:42:25 2012] Spatial fit model total counts = 2318.560000, observed total counts = 2712.000000
[Thu May 10 00:42:25 2012] Poor agreement between spatial fit and data for source 102
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May 10 00:42:25 2012] Vigneting correction estimate = 1.000000
[Thu May 10 00:42:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 10 00:42:25 2012] Assessing source extent using major
[Thu May 10 00:42:25 2012] Source does appear to be extended
[Thu May 10 00:42:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 10 00:42:25 2012] Source is confused with source 100
[Thu May 10 00:44:42 2012] Using EEF radius (= 6.99 ")to estimate initial spatial extent for simple fitting
[Thu May 10 00:44:42 2012] Initial guess for spatial extent in simple fitting = 6.99"
[Thu May 10 00:44:42 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.901
[Thu May 10 00:44:42 2012] Giving source the simple spatial ID 82 for pass 1, mean size = 6.99"
[Thu May 10 17:41:44 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src82.ximg exists
[Thu May 10 17:41:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src82.csv
[Thu May 10 17:41:44 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src82_1.ximg exists
[Thu May 10 17:41:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src82.csv
[Thu May 10 17:41:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src82_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src82.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 17:41:46 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src82.ximg exists
[Thu May 10 17:41:46 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src82_1.ximg exists
[Thu May 10 17:41:46 2012] Fit fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src82 appears to have run properly
[Fri May 11 08:46:09 2012] Spatial fit model total counts = 2261.860000, observed total counts = 2265.000000
[Fri May 11 08:46:09 2012] Offset between fit and detection position for source 102 = 7.674677 pixels
[Fri May 11 08:46:09 2012] 2356.372000 total counts/ 2219.020000 bgd. counts: snr = 2.915777
Spatial fit parameters:
  Offset between fit and detection position for source 102 = 7.674677 pixels
  Position = (295.8, 278.2) = 0 42 53.49 41 13 50.8
  Extent = 14.0 (13.9-28.0)", rotation angle = 0
  Source counts = 137.4 +/- 48.5
  Background counts = 2219.0
  Rate = 0.007 +/- 0.002
[Fri May 11 08:46:09 2012] Vigneting correction estimate = 1.000000
[Fri May 11 08:46:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 11 08:46:09 2012] Assessing source extent using major axis lower bound
[Fri May 11 08:46:09 2012] Source does appear to be extended
[Fri May 11 08:46:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 11 08:47:50 2012] XMMSAS src. selection expression = ellipse(25688.546000, 24156.660000, 839.082024, 839.082024, 0.000000, X, Y)
[Fri May 11 08:47:50 2012] Writing source region out to fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src102_src.reg
[Fri May 11 08:47:50 2012] Extracting stamp from image fullrun_pn_xmm0505720401_pi300-10000_cl_sm2.00.img.gz, (248, 230) - (344, 326)
[Fri May 11 08:47:50 2012] XMMSAS bgd. selection expression = annulus(25688.546000, 24156.660000, 1398.470040, 2796.940080, X, Y) && !ellipse(29016.687164, 26780.979919, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(26096.434000, 27287.024000, 1146.072033, 1146.072033, 0.000000, X, Y) && !ellipse(27095.300873, 27268.870758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27710.288780, 26942.704400, 441.067213, 441.067213, 0.000000, X, Y) && !ellipse(25303.944641, 26744.059082, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24249.580000, 26798.260000, 635.284018, 205.886406, 110.941000, X, Y) && !ellipse(24578.771179, 26259.439240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25855.468800, 26359.339400, 364.104810, 364.104810, 0.000000, X, Y) && !ellipse(23469.961800, 26084.602200, 470.874414, 470.874414, 0.000000, X, Y) && !ellipse(26792.909800, 26039.576200, 538.040015, 538.040015, 0.000000, X, Y) && !ellipse(28173.392000, 25261.866000, 397.730411, 397.730411, 0.000000, X, Y) && !ellipse(29082.816000, 24604.220000, 1230.488035, 1230.488035, 0.000000, X, Y) && !ellipse(28533.149200, 23712.110000, 384.152011, 384.152011, 0.000000, X, Y) && !ellipse(22216.291595, 22927.111969, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27583.550140, 21524.688324, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24772.568000, 27839.438000, 1151.376033, 758.405622, 293.271000, X, Y) && !ellipse(29344.843475, 27404.091400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23166.547821, 26904.080353, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25793.234680, 25013.436646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26870.905762, 24669.312988, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27563.292267, 24498.124664, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 11 08:47:50 2012] Writing fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src102.gif
[Fri May 11 12:55:39 2012] Mean detx,y = (-448.93, 3057.89) 
[Fri May 11 12:55:45 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 11 12:56:31 2012] Binned source spectrum to 10 counts/bin
[Fri May 11 12:56:32 2012] Setting source spectrum file to fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src102_src_b10.pi.gz
[Fri May 11 12:56:32 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src102_bgd.pi.gz
[Sat May 12 14:51:30 2012] Updating aperture counts using extracted products
[Sat May 12 14:51:30 2012] Error reading totcts from fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src102_src_b10.pi.gz
[Sat May 12 14:51:35 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 12 14:51:35 2012] Using photon index=1.80, rate=0.00682, arf fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src102.arf
[Sat May 12 14:51:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 12 14:51:35 2012] Updating source flux to 1.9e-14
[Sat May 12 15:10:29 2012] Flag p found in src. 102 procflags, skipping spectral fitting
[Sat May 12 15:10:29 2012] Flag c found in src. 102 procflags, skipping spectral fitting