[Tue May  8 11:38:21 2012] Detection parameters:
  Position = (297.0, 288.1) = 0 42 53.02 41 14 30.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 151.0 +/- 23.9
  Background counts = 120.7
  Rate = 0.009 +/- 0.001

[Tue May  8 11:38:24 2012] Off-axis axis estimate = 0.76'
[Tue May  8 11:46:40 2012] Using EEF radius (= 6.81 ")to estimate initial spatial extent for simple fitting
[Tue May  8 11:46:40 2012] Initial guess for spatial extent in simple fitting = 6.81"
[Tue May  8 11:46:40 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.938
[Tue May  8 11:46:40 2012] Giving source the simple spatial ID 97 for pass 0, mean size = 6.81"
[Wed May  9 03:34:26 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src97.ximg exists
[Wed May  9 03:34:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src97.csv
[Wed May  9 03:34:26 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src97_1.ximg exists
[Wed May  9 03:34:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src97.csv
[Wed May  9 03:34:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src97_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src97.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  9 03:34:28 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src97.ximg exists
[Wed May  9 03:34:28 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src97_1.ximg exists
[Wed May  9 03:34:28 2012] Fit fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src97 appears to have run properly
[Thu May 10 00:42:25 2012] Source 100 is offset by -4.932843 and -7.191878 pixels which is larger than
2 X fitted extent = 6.260092 x 6.260092, not incorporating fit results
[Thu May 10 00:42:25 2012] Vigneting correction estimate = 1.000000
[Thu May 10 00:42:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 10 00:42:25 2012] Assessing source extent using major
[Thu May 10 00:42:25 2012] Source does appear to be extended
[Thu May 10 00:42:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 10 00:42:25 2012] Source is confused with source 102
[Thu May 10 00:44:42 2012] Using EEF radius (= 6.81 ")to estimate initial spatial extent for simple fitting
[Thu May 10 00:44:42 2012] Initial guess for spatial extent in simple fitting = 6.81"
[Thu May 10 00:44:42 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.938
[Thu May 10 00:44:42 2012] Giving source the simple spatial ID 81 for pass 1, mean size = 6.81"
[Thu May 10 17:41:44 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src81.ximg exists
[Thu May 10 17:41:44 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src81_1.ximg exists
[Thu May 10 17:41:44 2012] Fit fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src81 appears to have run properly
[Thu May 10 17:41:46 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src81.ximg exists
[Thu May 10 17:41:46 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src81_1.ximg exists
[Thu May 10 17:41:46 2012] Fit fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src81 appears to have run properly
[Fri May 11 08:46:09 2012] Source 100 is offset by -4.976705 and -7.191878 pixels which is larger than
2 X fitted extent = 6.260092 x 6.260092, not incorporating fit results
[Fri May 11 08:46:09 2012] Vigneting correction estimate = 1.000000
[Fri May 11 08:46:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 11 08:46:09 2012] Assessing source extent using major
[Fri May 11 08:46:09 2012] Source does appear to be extended
[Fri May 11 08:46:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 11 08:47:50 2012] XMMSAS src. selection expression = ellipse(25793.234680, 25013.436646, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 11 08:47:50 2012] Writing source region out to fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src100_src.reg
[Fri May 11 08:47:50 2012] Extracting stamp from image fullrun_pn_xmm0505720401_pi300-10000_cl_sm2.00.img.gz, (260, 251) - (335, 326)
[Fri May 11 08:47:50 2012] XMMSAS bgd. selection expression = annulus(25793.234680, 25013.436646, 1087.500000, 2175.000000, X, Y) && !ellipse(29016.687164, 26780.979919, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(28243.794861, 28007.343262, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26096.434000, 27287.024000, 1146.072033, 1146.072033, 0.000000, X, Y) && !ellipse(27095.300873, 27268.870758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27710.288780, 26942.704400, 441.067213, 441.067213, 0.000000, X, Y) && !ellipse(25303.944641, 26744.059082, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24249.580000, 26798.260000, 635.284018, 205.886406, 110.941000, X, Y) && !ellipse(24578.771179, 26259.439240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25855.468800, 26359.339400, 364.104810, 364.104810, 0.000000, X, Y) && !ellipse(23469.961800, 26084.602200, 470.874414, 470.874414, 0.000000, X, Y) && !ellipse(26792.909800, 26039.576200, 538.040015, 538.040015, 0.000000, X, Y) && !ellipse(28173.392000, 25261.866000, 397.730411, 397.730411, 0.000000, X, Y) && !ellipse(29082.816000, 24604.220000, 1230.488035, 1230.488035, 0.000000, X, Y) && !ellipse(24772.568000, 27839.438000, 1151.376033, 758.405622, 293.271000, X, Y) && !ellipse(23166.547821, 26904.080353, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25688.546000, 24156.660000, 1118.776032, 1118.776032, 0.000000, X, Y) && !ellipse(26870.905762, 24669.312988, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27563.292267, 24498.124664, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 11 08:47:50 2012] Writing fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src100.gif
[Fri May 11 12:54:22 2012] Mean detx,y = (-732.11, 2284.49) 
[Fri May 11 12:54:28 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 11 12:55:11 2012] Binned source spectrum to 10 counts/bin
[Fri May 11 12:55:12 2012] Setting source spectrum file to fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src100_src_b10.pi.gz
[Fri May 11 12:55:12 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src100_bgd.pi.gz
[Sat May 12 05:09:52 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat May 12 05:09:52 2012] rmf not generated due to insufficient counts
[Sat May 12 14:51:30 2012] Updating aperture counts using extracted products
[Sat May 12 14:51:30 2012] Error reading totcts from fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src100_src_b10.pi.gz
[Sat May 12 14:51:35 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 12 14:51:35 2012] Using photon index=1.80, rate=0.00885, arf fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src100.arf
[Sat May 12 14:51:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 12 14:51:35 2012] Updating source flux to 2.5e-14
[Sat May 12 15:10:29 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting