[Tue May  8 11:38:56 2012] Detection parameters:
  Position = (405.6, 264.2) = 0 42 11.18 41 12 48.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 48.9 +/- 10.1
  Background counts = 16.9
  Rate = 0.003 +/- 0.0007

[Tue May  8 11:38:57 2012] Off-axis axis estimate = 8.15'
[Wed May  9 14:14:27 2012] Using EEF radius (= 10.51 ")to estimate initial spatial extent for simple fitting
[Wed May  9 14:14:27 2012] Initial guess for spatial extent in simple fitting = 10.51"
[Wed May  9 14:14:27 2012] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.883
[Wed May  9 14:14:27 2012] Giving source the simple spatial ID 77 for pass 0, mean size = 10.51"
[Thu May 10 00:41:29 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src77.ximg exists
[Thu May 10 00:41:29 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src77.csv
[Thu May 10 00:41:29 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src77_1.ximg exists
[Thu May 10 00:41:29 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src77.csv
[Thu May 10 00:41:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src77_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src77.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 00:41:31 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src77.ximg exists
[Thu May 10 00:41:31 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src77_1.ximg exists
[Thu May 10 00:41:31 2012] Fit fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src77 appears to have run properly
[Thu May 10 00:43:42 2012] Spatial fit model total counts = 723.112000, observed total counts = 702.000000
[Thu May 10 00:43:42 2012] Offset between fit and detection position for source 86 = 5.294919 pixels
[Thu May 10 00:43:42 2012] Warning, changing simple spatial fit ID from 77 to 41
[Thu May 10 00:43:42 2012] 555.605130 total counts/ 0.072130 bgd. counts: snr = 2068.476979
Spatial fit parameters:
  Offset between fit and detection position for source 86 = 5.294919 pixels
  Position = (400.3, 264.0) = 0 42 13.22 41 12 48.6
  Extent = 19.4 (19.4-19.4)", rotation angle = 0
  Source counts = 555.5 +/- 23.6
  Background counts = 0.1
  Rate = 0.02 +/- 0.001
[Thu May 10 00:43:42 2012] Spatial fit model total counts = 268.963000, observed total counts = 251.000000
[Thu May 10 00:43:42 2012] Offset between fit and detection position for source 86 = 0.149227 pixels
[Thu May 10 00:43:42 2012] Warning, changing simple spatial fit ID from 41 to 77
[Thu May 10 00:43:42 2012] 267.695700 total counts/ 94.421700 bgd. counts: snr = 17.831895
Spatial fit parameters:
  Offset between fit and detection position for source 86 = 0.149227 pixels
  Position = (400.3, 263.9) = 0 42 13.22 41 12 48.0
  Extent = 21.0 (21.0-42.0)", rotation angle = 0
  Source counts = 173.3 +/- 16.4
  Background counts = 94.4
  Rate = 0.008 +/- 0.0007
[Thu May 10 00:43:43 2012] Vigneting correction estimate = 1.000000
[Thu May 10 00:43:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 10 00:43:43 2012] Assessing source extent using major axis lower bound
[Thu May 10 00:43:43 2012] Source does appear to be extended
[Thu May 10 00:43:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 10 00:43:43 2012] Source is confused with source 49
[Fri May 11 00:01:22 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 11 00:01:22 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 11 00:01:22 2012] Initial guess for spatial extent in simple fitting = 21.01"
[Fri May 11 00:01:22 2012] source mask rpix=4.8, npix_max = 113, mask sum = 110, frac = 0.968
[Fri May 11 00:01:22 2012] Giving source the simple spatial ID 73 for pass 1, mean size = 21.01"
[Fri May 11 08:45:33 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src73.ximg exists
[Fri May 11 08:45:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src73.csv
[Fri May 11 08:45:33 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src73_1.ximg exists
[Fri May 11 08:45:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src73.csv
[Fri May 11 08:45:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src73_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 11 08:45:35 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src73.ximg exists
[Fri May 11 08:45:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src73.csv
[Fri May 11 08:45:36 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src73_1.ximg exists
[Fri May 11 08:45:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src73.csv
[Fri May 11 08:45:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src73_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 11 08:47:02 2012] Warning, spatial fit 73 centroid is now closest to src. 49
[Fri May 11 08:47:02 2012] Vigneting correction estimate = 1.000000
[Fri May 11 08:47:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 11 08:47:02 2012] Assessing source extent using major axis lower bound
[Fri May 11 08:47:02 2012] Source does appear to be extended
[Fri May 11 08:47:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 12 09:14:39 2012] XMMSAS src. selection expression = ellipse(34775.628000, 22909.249000, 1260.726036, 1260.726036, 0.000000, X, Y)
[Sat May 12 09:14:39 2012] Writing source region out to fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src86_src.reg
[Sat May 12 09:14:39 2012] Extracting stamp from image fullrun_mos2_xmm0505720401_pi300-10000_cl_sm2.00.img.gz, (328, 191) - (473, 336)
[Sat May 12 09:14:39 2012] XMMSAS bgd. selection expression = annulus(34775.628000, 22909.249000, 2101.210060, 4202.420121, X, Y) && !ellipse(30675.607020, 27189.713400, 396.575211, 396.575211, 0.000000, X, Y) && !ellipse(30447.832600, 23442.410800, 427.864012, 427.864012, 0.000000, X, Y) && !ellipse(31317.369800, 22422.656800, 428.694412, 383.211211, 50.917300, X, Y) && !ellipse(32519.374000, 26278.084000, 305.292009, 266.648008, 33.416000, X, Y) && !ellipse(33506.323120, 24397.584015, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32775.312000, 26685.312000, 446.664813, 446.664813, 0.000000, X, Y) && !ellipse(33567.055000, 22447.348200, 452.433613, 452.433613, 0.000000, X, Y) && !ellipse(32634.804000, 23835.503400, 328.176809, 328.176809, 0.000000, X, Y) && !ellipse(31317.904602, 19620.148193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29555.716000, 26932.594000, 1316.336038, 1316.336038, 0.000000, X, Y) && !ellipse(34317.463776, 22664.840210, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32488.492000, 24518.258000, 283.192808, 193.802406, 90.756000, X, Y) && !ellipse(35083.535309, 20546.850327, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39618.662537, 25166.541565, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32018.872000, 23994.502200, 753.465622, 306.879209, 293.729000, X, Y) && !ellipse(35010.670685, 27737.807343, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29850.342468, 27690.969971, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 12 09:14:39 2012] Writing fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src86.gif
[Sat May 12 10:14:44 2012] Mean detx,y = (-7778.30, -397.71) 
[Sat May 12 10:14:47 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 12 10:15:37 2012] Binned source spectrum to 10 counts/bin
[Sat May 12 10:15:37 2012] Setting source spectrum file to fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src86_src_b10.pi.gz
[Sat May 12 10:15:37 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src86_bgd.pi.gz
[Sat May 12 14:51:51 2012] Updating aperture counts using extracted products
[Sat May 12 14:51:51 2012] Error reading totcts from fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src86_src_b10.pi.gz
[Sat May 12 14:51:55 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 12 14:51:55 2012] Using photon index=1.80, rate=0.00775, arf fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src86.arf
[Sat May 12 14:51:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 12 14:51:55 2012] Updating source flux to 1e-13
[Sat May 12 15:00:14 2012] Flag c found in src. 86 procflags, skipping spectral fitting