[Tue May  8 11:38:55 2012] Detection parameters:
  Position = (315.5, 282.3) = 0 42 45.90 41 14 15.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 68.3 +/- 14.3
  Background counts = 47.4
  Rate = 0.004 +/- 0.0008

[Tue May  8 11:38:57 2012] Off-axis axis estimate = 1.70'
[Wed May  9 14:14:27 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Wed May  9 14:14:27 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Wed May  9 14:14:27 2012] source mask rpix=1.7, npix_max = 18, mask sum = 13, frac = 0.688
[Wed May  9 14:14:27 2012] Giving source the simple spatial ID 73 for pass 0, mean size = 7.28"
[Thu May 10 00:41:29 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src73.ximg exists
[Thu May 10 00:41:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src73.csv
[Thu May 10 00:41:29 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src73_1.ximg exists
[Thu May 10 00:41:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src73.csv
[Thu May 10 00:41:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src73_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 00:41:31 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src73.ximg exists
[Thu May 10 00:41:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src73.csv
[Thu May 10 00:41:31 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src73_1.ximg exists
[Thu May 10 00:41:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src73.csv
[Thu May 10 00:41:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src73_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 00:43:42 2012] Source 82 is offset by 7.194613 and -5.869500 pixels which is larger than
2 X fitted extent = 0.836818 x 0.836818, not incorporating fit results
[Thu May 10 00:43:43 2012] Vigneting correction estimate = 1.000000
[Thu May 10 00:43:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 10 00:43:43 2012] Assessing source extent using major
[Thu May 10 00:43:43 2012] Source does appear to be extended
[Thu May 10 00:43:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 11 00:01:22 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Fri May 11 00:01:22 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Fri May 11 00:01:22 2012] source mask rpix=1.7, npix_max = 18, mask sum = 13, frac = 0.688
[Fri May 11 00:01:22 2012] Giving source the simple spatial ID 70 for pass 1, mean size = 7.28"
[Fri May 11 08:45:33 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src70.ximg exists
[Fri May 11 08:45:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src70.csv
[Fri May 11 08:45:33 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src70_1.ximg exists
[Fri May 11 08:45:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src70.csv
[Fri May 11 08:45:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src70_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 11 08:45:35 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src70.ximg exists
[Fri May 11 08:45:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src70.csv
[Fri May 11 08:45:35 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src70_1.ximg exists
[Fri May 11 08:45:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src70.csv
[Fri May 11 08:45:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src70_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 11 08:47:02 2012] Source 82 is offset by -1.533217 and 0.486918 pixels which is larger than
2 X fitted extent = 1.498970 x 1.498970, not incorporating fit results
[Fri May 11 08:47:02 2012] Vigneting correction estimate = 1.000000
[Fri May 11 08:47:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 11 08:47:02 2012] Assessing source extent using major
[Fri May 11 08:47:02 2012] Source does appear to be extended
[Fri May 11 08:47:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 12 09:14:39 2012] XMMSAS src. selection expression = ellipse(27400.005310, 24510.101501, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 12 09:14:39 2012] Writing source region out to fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src82_src.reg
[Sat May 12 09:14:39 2012] Extracting stamp from image fullrun_mos2_xmm0505720401_pi300-10000_cl_sm2.00.img.gz, (278, 245) - (353, 320)
[Sat May 12 09:14:39 2012] XMMSAS bgd. selection expression = annulus(27400.005310, 24510.101501, 1087.500000, 2175.000000, X, Y) && !ellipse(28879.408000, 26306.964000, 1206.928035, 1206.928035, 0.000000, X, Y) && !ellipse(26791.526200, 26033.006640, 516.259215, 516.259215, 0.000000, X, Y) && !ellipse(27741.665400, 26900.450800, 924.416027, 401.585612, 45.559000, X, Y) && !ellipse(25311.466000, 26825.742600, 381.641611, 353.151210, 207.586000, X, Y) && !ellipse(26390.762000, 25996.222000, 1056.896030, 1056.896030, 0.000000, X, Y) && !ellipse(28146.185364, 25257.529419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28816.898840, 24920.444200, 326.355209, 326.355209, 0.000000, X, Y) && !ellipse(29555.716000, 26932.594000, 1316.336038, 1316.336038, 0.000000, X, Y) && !ellipse(24564.941132, 26145.689819, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28523.122000, 23689.340200, 296.680809, 296.680809, 0.000000, X, Y) && !ellipse(28574.534515, 25620.434753, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26243.689606, 27354.644135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26634.470000, 28190.576000, 2420.848070, 2420.848070, 0.000000, X, Y) && !ellipse(26402.346000, 29037.592000, 2420.848070, 1215.072035, 323.851000, X, Y)
[Sat May 12 09:14:39 2012] Writing fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src82.gif
[Sat May 12 10:12:07 2012] Mean detx,y = (-791.45, -2103.17) 
[Sat May 12 10:12:10 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 12 10:12:30 2012] Binned source spectrum to 10 counts/bin
[Sat May 12 10:12:30 2012] Setting source spectrum file to fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src82_src_b10.pi.gz
[Sat May 12 10:12:30 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src82_bgd.pi.gz
[Sat May 12 14:13:39 2012] Not generating rmf since there are only 68 counts
[Sat May 12 14:13:39 2012] rmf not generated due to insufficient counts
[Sat May 12 14:51:50 2012] Updating aperture counts using extracted products
[Sat May 12 14:51:50 2012] Error reading totcts from fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src82_src_b10.pi.gz
[Sat May 12 14:51:55 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 12 14:51:55 2012] Using photon index=1.80, rate=0.00373, arf fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src82.arf
[Sat May 12 14:51:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 12 14:51:55 2012] Updating source flux to 4e-14
[Sat May 12 15:00:14 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting