[Tue May  8 11:38:55 2012] Detection parameters:
  Position = (403.0, 319.4) = 0 42 12.14 41 16 48.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 81.3 +/- 12.8
  Background counts = 17.8
  Rate = 0.005 +/- 0.0008

[Tue May  8 11:38:57 2012] Off-axis axis estimate = 7.73'
[Wed May  9 14:14:27 2012] Using EEF radius (= 10.29 ")to estimate initial spatial extent for simple fitting
[Wed May  9 14:14:27 2012] Initial guess for spatial extent in simple fitting = 10.29"
[Wed May  9 14:14:27 2012] source mask rpix=2.4, npix_max = 32, mask sum = 30, frac = 0.913
[Wed May  9 14:14:27 2012] Giving source the simple spatial ID 66 for pass 0, mean size = 10.29"
[Thu May 10 00:41:29 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src66.ximg exists
[Thu May 10 00:41:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src66.csv
[Thu May 10 00:41:29 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src66_1.ximg exists
[Thu May 10 00:41:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src66.csv
[Thu May 10 00:41:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src66_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src66.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 00:41:30 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src66.ximg exists
[Thu May 10 00:41:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src66.csv
[Thu May 10 00:41:30 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src66_1.ximg exists
[Thu May 10 00:41:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src66.csv
[Thu May 10 00:41:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src66_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src66.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 00:43:42 2012] Warning: source 66 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 78 at 12.941606 pixels away
[Thu May 10 00:43:43 2012] Vigneting correction estimate = 1.000000
[Thu May 10 00:43:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 10 00:43:43 2012] Assessing source extent using major
[Thu May 10 00:43:43 2012] Source does appear to be extended
[Thu May 10 00:43:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 11 00:01:22 2012] Using EEF radius (= 10.29 ")to estimate initial spatial extent for simple fitting
[Fri May 11 00:01:22 2012] Initial guess for spatial extent in simple fitting = 10.29"
[Fri May 11 00:01:22 2012] source mask rpix=2.4, npix_max = 32, mask sum = 30, frac = 0.913
[Fri May 11 00:01:22 2012] Giving source the simple spatial ID 66 for pass 1, mean size = 10.29"
[Fri May 11 08:45:33 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src66.ximg exists
[Fri May 11 08:45:33 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src66_1.ximg exists
[Fri May 11 08:45:33 2012] Fit fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src66 appears to have run properly
[Fri May 11 08:45:35 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src66.ximg exists
[Fri May 11 08:45:35 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src66_1.ximg exists
[Fri May 11 08:45:35 2012] Fit fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src66 appears to have run properly
[Fri May 11 08:47:02 2012] Source 78 is offset by 7.994652 and -5.530100 pixels which is larger than
2 X fitted extent = 2.068543 x 2.068543, not incorporating fit results
[Fri May 11 08:47:02 2012] Vigneting correction estimate = 1.000000
[Fri May 11 08:47:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 11 08:47:02 2012] Assessing source extent using major
[Fri May 11 08:47:02 2012] Source does appear to be extended
[Fri May 11 08:47:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 12 09:14:39 2012] XMMSAS src. selection expression = ellipse(35010.670685, 27737.807343, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 12 09:14:39 2012] Writing source region out to fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src78_src.reg
[Sat May 12 09:14:39 2012] Extracting stamp from image fullrun_mos2_xmm0505720401_pi300-10000_cl_sm2.00.img.gz, (365, 282) - (440, 357)
[Sat May 12 09:14:39 2012] XMMSAS bgd. selection expression = annulus(35010.670685, 27737.807343, 1087.500000, 2175.000000, X, Y) && !ellipse(34727.456000, 29868.982000, 253.996807, 253.996807, 0.000000, X, Y) && !ellipse(35947.248000, 29459.162000, 286.765608, 286.765608, 0.000000, X, Y) && !ellipse(32775.312000, 26685.312000, 446.664813, 446.664813, 0.000000, X, Y) && !ellipse(34945.338360, 29144.016600, 310.616009, 310.616009, 0.000000, X, Y) && !ellipse(35562.677826, 28901.408447, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34150.193420, 28366.122400, 323.913609, 323.913609, 0.000000, X, Y) && !ellipse(34270.761810, 29200.455017, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 12 09:14:39 2012] Writing fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src78.gif
[Sat May 12 10:10:13 2012] Mean detx,y = (-5944.37, 4248.04) 
[Sat May 12 10:10:16 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 12 10:10:41 2012] Binned source spectrum to 10 counts/bin
[Sat May 12 10:10:43 2012] Setting source spectrum file to fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src78_src_b10.pi.gz
[Sat May 12 10:10:43 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src78_bgd.pi.gz
[Sat May 12 14:13:17 2012] Not generating rmf since there are only 81 counts
[Sat May 12 14:13:17 2012] rmf not generated due to insufficient counts
[Sat May 12 14:51:50 2012] Updating aperture counts using extracted products
[Sat May 12 14:51:50 2012] Error reading totcts from fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src78_src_b10.pi.gz
[Sat May 12 14:51:55 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 12 14:51:55 2012] Using photon index=1.80, rate=0.00515, arf fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src78.arf
[Sat May 12 14:51:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 12 14:51:55 2012] Updating source flux to 7.6e-14
[Sat May 12 15:00:14 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting