[Tue May  8 11:38:54 2012] Detection parameters:
  Position = (308.7, 326.7) = 0 42 48.52 41 17 25.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 50.4 +/- 12.7
  Background counts = 37.4
  Rate = 0.003 +/- 0.0006

[Tue May  8 11:38:57 2012] Off-axis axis estimate = 2.18'
[Wed May  9 14:14:27 2012] Using EEF radius (= 7.52 ")to estimate initial spatial extent for simple fitting
[Wed May  9 14:14:27 2012] Initial guess for spatial extent in simple fitting = 7.52"
[Wed May  9 14:14:27 2012] source mask rpix=1.7, npix_max = 19, mask sum = 22, frac = 1.108
[Wed May  9 14:14:27 2012] Giving source the simple spatial ID 87 for pass 0, mean size = 7.52"
[Thu May 10 00:41:29 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src87.ximg exists
[Thu May 10 00:41:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src87.csv
[Thu May 10 00:41:29 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src87_1.ximg exists
[Thu May 10 00:41:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src87.csv
[Thu May 10 00:41:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src87_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src87.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 00:41:31 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src87.ximg exists
[Thu May 10 00:41:31 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src87_1.ximg exists
[Thu May 10 00:41:31 2012] Fit fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src87 appears to have run properly
[Thu May 10 00:43:43 2012] Source 74 is offset by -5.835751 and 4.997994 pixels which is larger than
2 X fitted extent = 0.864124 x 0.864124, not incorporating fit results
[Thu May 10 00:43:43 2012] Vigneting correction estimate = 1.000000
[Thu May 10 00:43:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 10 00:43:43 2012] Assessing source extent using major
[Thu May 10 00:43:43 2012] Source does appear to be extended
[Thu May 10 00:43:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 10 00:43:43 2012] Source is confused with source 72
[Fri May 11 00:01:22 2012] Using EEF radius (= 7.52 ")to estimate initial spatial extent for simple fitting
[Fri May 11 00:01:22 2012] Initial guess for spatial extent in simple fitting = 7.52"
[Fri May 11 00:01:22 2012] source mask rpix=1.7, npix_max = 19, mask sum = 22, frac = 1.108
[Fri May 11 00:01:22 2012] Giving source the simple spatial ID 79 for pass 1, mean size = 7.52"
[Fri May 11 08:45:34 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src79.ximg exists
[Fri May 11 08:45:34 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src79_1.ximg exists
[Fri May 11 08:45:34 2012] Fit fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src79 appears to have run properly
[Fri May 11 08:45:36 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src79.ximg exists
[Fri May 11 08:45:36 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src79_1.ximg exists
[Fri May 11 08:45:36 2012] Fit fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src79 appears to have run properly
[Fri May 11 08:47:02 2012] Spatial fit model total counts = 841.979000, observed total counts = 822.000000
[Fri May 11 08:47:02 2012] Offset between fit and detection position for source 74 = 2.647160 pixels
[Fri May 11 08:47:02 2012] Warning, changing simple spatial fit ID from 79 to 72
[Fri May 11 08:47:02 2012] 758.488900 total counts/ 677.656000 bgd. counts: snr = 3.105157
Spatial fit parameters:
  Offset between fit and detection position for source 74 = 2.647160 pixels
  Position = (311.2, 325.9) = 0 42 47.54 41 17 18.3
  Extent = 15.4 (15.3-30.7)", rotation angle = 0
  Source counts = 80.8 +/- 27.5
  Background counts = 677.7
  Rate = 0.004 +/- 0.001
[Fri May 11 08:47:02 2012] Vigneting correction estimate = 1.000000
[Fri May 11 08:47:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 11 08:47:02 2012] Assessing source extent using major axis lower bound
[Fri May 11 08:47:02 2012] Source does appear to be extended
[Fri May 11 08:47:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 12 09:14:40 2012] XMMSAS src. selection expression = ellipse(27029.844000, 28307.566000, 922.398027, 922.398027, 0.000000, X, Y)
[Sat May 12 09:14:40 2012] Writing source region out to fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src74_src.reg
[Sat May 12 09:14:40 2012] Extracting stamp from image fullrun_mos2_xmm0505720401_pi300-10000_cl_sm2.00.img.gz, (258, 273) - (364, 379)
[Sat May 12 09:14:40 2012] XMMSAS bgd. selection expression = annulus(27029.844000, 28307.566000, 1537.330044, 3074.660088, X, Y) && !ellipse(28879.408000, 26306.964000, 1206.928035, 1206.928035, 0.000000, X, Y) && !ellipse(26791.526200, 26033.006640, 516.259215, 516.259215, 0.000000, X, Y) && !ellipse(27741.665400, 26900.450800, 924.416027, 401.585612, 45.559000, X, Y) && !ellipse(23463.514779, 26073.633108, 494.701919, 354.648880, 68.626725, X, Y) && !ellipse(25311.466000, 26825.742600, 381.641611, 353.151210, 207.586000, X, Y) && !ellipse(27073.660400, 27284.633200, 476.670414, 476.670414, 0.000000, X, Y) && !ellipse(25860.048101, 30257.847567, 407.376405, 363.736922, 0.000000, X, Y) && !ellipse(24253.839000, 30746.141200, 380.250411, 380.250411, 0.000000, X, Y) && !ellipse(24206.443146, 26897.044525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26390.762000, 25996.222000, 1056.896030, 1056.896030, 0.000000, X, Y) && !ellipse(28634.615000, 30056.163400, 378.471211, 378.471211, 0.000000, X, Y) && !ellipse(28146.185364, 25257.529419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29762.769400, 31685.467000, 354.738410, 261.715208, 34.099100, X, Y) && !ellipse(28816.898840, 24920.444200, 326.355209, 326.355209, 0.000000, X, Y) && !ellipse(29555.716000, 26932.594000, 1316.336038, 1316.336038, 0.000000, X, Y) && !ellipse(25860.526000, 27709.934000, 223.288006, 223.288006, 0.000000, X, Y) && !ellipse(30548.376221, 31265.165100, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24564.941132, 26145.689819, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28153.136230, 27863.631836, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26608.750200, 29462.641600, 339.794410, 339.794410, 0.000000, X, Y) && !ellipse(27545.315060, 28747.774986, 430.532812, 430.532812, 0.000000, X, Y) && !ellipse(25201.856110, 29883.766632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28574.534515, 25620.434753, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26243.689606, 27354.644135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30688.458221, 31000.209106, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25395.667938, 28214.732910, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27400.005310, 24510.101501, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26634.470000, 28190.576000, 2420.848070, 2420.848070, 0.000000, X, Y) && !ellipse(29850.342468, 27690.969971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26402.346000, 29037.592000, 2420.848070, 1215.072035, 323.851000, X, Y) && !ellipse(26179.770000, 29349.644000, 1210.424035, 1210.424035, 0.000000, X, Y)
[Sat May 12 09:14:40 2012] Writing fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src74.gif
[Sat May 12 10:19:51 2012] Mean detx,y = (1150.26, 816.71) 
[Sat May 12 10:19:53 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 12 10:20:10 2012] Binned source spectrum to 10 counts/bin
[Sat May 12 10:20:10 2012] Setting source spectrum file to fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src74_src_b10.pi.gz
[Sat May 12 10:20:10 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src74_bgd.pi.gz
[Sat May 12 14:49:48 2012] Not generating rmf since there are only 80 counts
[Sat May 12 14:49:48 2012] rmf not generated due to insufficient counts
[Sat May 12 14:51:51 2012] Updating aperture counts using extracted products
[Sat May 12 14:51:51 2012] Error reading totcts from fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src74_src_b10.pi.gz
[Sat May 12 14:51:55 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 12 14:51:55 2012] Using photon index=1.80, rate=0.00362, arf fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src74.arf
[Sat May 12 14:51:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 12 14:51:55 2012] Updating source flux to 3.5e-14
[Sat May 12 15:00:14 2012] Flag b found in src. 74 procflags, skipping spectral fitting
[Sat May 12 15:00:14 2012] Flag c found in src. 74 procflags, skipping spectral fitting
[Sat May 12 15:00:14 2012] Source 74 has fewer than 100.000000 counts, skipping spectral fitting