[Tue May  8 11:38:54 2012] Detection parameters:
  Position = (298.0, 329.8) = 0 42 52.65 41 17 34.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 56.7 +/- 13.7
  Background counts = 34.7
  Rate = 0.003 +/- 0.0007

[Tue May  8 11:38:57 2012] Off-axis axis estimate = 2.27'
[Wed May  9 14:14:27 2012] Using EEF radius (= 7.57 ")to estimate initial spatial extent for simple fitting
[Wed May  9 14:14:27 2012] Initial guess for spatial extent in simple fitting = 7.57"
[Wed May  9 14:14:27 2012] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.798
[Wed May  9 14:14:27 2012] Giving source the simple spatial ID 85 for pass 0, mean size = 7.57"
[Thu May 10 00:41:29 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src85.ximg exists
[Thu May 10 00:41:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src85.csv
[Thu May 10 00:41:29 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src85_1.ximg exists
[Thu May 10 00:41:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src85.csv
[Thu May 10 00:41:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src85_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src85.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 00:41:31 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src85.ximg exists
[Thu May 10 00:41:31 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src85_1.ximg exists
[Thu May 10 00:41:31 2012] Fit fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src85 appears to have run properly
[Thu May 10 00:43:42 2012] Source 73 is offset by -1.003213 and 1.029938 pixels which is larger than
2 X fitted extent = 0.903618 x 0.903618, not incorporating fit results
[Thu May 10 00:43:43 2012] Warning, spatial fit 85 centroid is now closest to src. 70
[Thu May 10 00:43:43 2012] Vigneting correction estimate = 1.000000
[Thu May 10 00:43:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 10 00:43:43 2012] Assessing source extent using major
[Thu May 10 00:43:43 2012] Source does appear to be extended
[Thu May 10 00:43:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 10 00:43:43 2012] Source is confused with source 76
[Fri May 11 00:01:22 2012] Using EEF radius (= 7.57 ")to estimate initial spatial extent for simple fitting
[Fri May 11 00:01:22 2012] Initial guess for spatial extent in simple fitting = 7.57"
[Fri May 11 00:01:22 2012] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.798
[Fri May 11 00:01:22 2012] Giving source the simple spatial ID 77 for pass 1, mean size = 7.57"
[Fri May 11 08:45:33 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src77.ximg exists
[Fri May 11 08:45:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src77.csv
[Fri May 11 08:45:34 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src77_1.ximg exists
[Fri May 11 08:45:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src77.csv
[Fri May 11 08:45:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src77_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src77.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 11 08:45:36 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src77.ximg exists
[Fri May 11 08:45:36 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src77_1.ximg exists
[Fri May 11 08:45:36 2012] Fit fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src77 appears to have run properly
[Fri May 11 08:47:02 2012] Warning, spatial fit 77 centroid is now closest to src. 70
[Fri May 11 08:47:02 2012] Spatial fit model total counts = 1039.380000, observed total counts = 1028.000000
[Fri May 11 08:47:02 2012] Offset between fit and detection position for source 73 = 7.564208 pixels
[Fri May 11 08:47:02 2012] Warning, changing simple spatial fit ID from 77 to 79
[Fri May 11 08:47:02 2012] 952.837000 total counts/ 766.599000 bgd. counts: snr = 6.726423
Spatial fit parameters:
  Offset between fit and detection position for source 73 = 7.564208 pixels
  Position = (304.0, 334.3) = 0 42 50.32 41 17 54.8
  Extent = 30.3 (29.7-60.5)" x 15.2 (7.4-30.0)", rotation angle = 324 (288-0) degrees
  Source counts = 186.2 +/- 30.9
  Background counts = 766.6
  Rate = 0.008 +/- 0.001
[Fri May 11 08:47:02 2012] Vigneting correction estimate = 1.000000
[Fri May 11 08:47:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 11 08:47:02 2012] Assessing source extent using major axis lower bound
[Fri May 11 08:47:02 2012] Source does appear to be extended
[Fri May 11 08:47:02 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.99
[Sat May 12 09:14:40 2012] XMMSAS src. selection expression = ellipse(26402.346000, 29037.592000, 1815.636052, 911.304026, 323.851000, X, Y)
[Sat May 12 09:14:40 2012] Writing source region out to fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src73_src.reg
[Sat May 12 09:14:40 2012] Extracting stamp from image fullrun_mos2_xmm0505720401_pi300-10000_cl_sm2.00.img.gz, (200, 230) - (408, 439)
[Sat May 12 09:14:40 2012] XMMSAS bgd. selection expression = annulus(26402.346000, 29037.592000, 3026.060087, 6052.120174, X, Y) && !ellipse(28879.408000, 26306.964000, 1206.928035, 1206.928035, 0.000000, X, Y) && !ellipse(26791.526200, 26033.006640, 516.259215, 516.259215, 0.000000, X, Y) && !ellipse(21772.161001, 25378.069263, 488.896560, 381.081047, 246.423552, X, Y) && !ellipse(27741.665400, 26900.450800, 924.416027, 401.585612, 45.559000, X, Y) && !ellipse(23463.514779, 26073.633108, 494.701919, 354.648880, 68.626725, X, Y) && !ellipse(25311.466000, 26825.742600, 381.641611, 353.151210, 207.586000, X, Y) && !ellipse(27073.660400, 27284.633200, 476.670414, 476.670414, 0.000000, X, Y) && !ellipse(25860.048101, 30257.847567, 407.376405, 363.736922, 0.000000, X, Y) && !ellipse(30675.607020, 27189.713400, 396.575211, 396.575211, 0.000000, X, Y) && !ellipse(30447.832600, 23442.410800, 427.864012, 427.864012, 0.000000, X, Y) && !ellipse(32519.374000, 26278.084000, 305.292009, 266.648008, 33.416000, X, Y) && !ellipse(24253.839000, 30746.141200, 380.250411, 380.250411, 0.000000, X, Y) && !ellipse(32775.312000, 26685.312000, 446.664813, 446.664813, 0.000000, X, Y) && !ellipse(24206.443146, 26897.044525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26390.762000, 25996.222000, 1056.896030, 1056.896030, 0.000000, X, Y) && !ellipse(23306.592200, 29267.212200, 401.440012, 401.440012, 0.000000, X, Y) && !ellipse(32634.804000, 23835.503400, 328.176809, 328.176809, 0.000000, X, Y) && !ellipse(28634.615000, 30056.163400, 378.471211, 378.471211, 0.000000, X, Y) && !ellipse(28146.185364, 25257.529419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31814.807934, 30666.969575, 486.865161, 298.419183, 38.620593, X, Y) && !ellipse(29762.769400, 31685.467000, 354.738410, 261.715208, 34.099100, X, Y) && !ellipse(28816.898840, 24920.444200, 326.355209, 326.355209, 0.000000, X, Y) && !ellipse(29555.716000, 26932.594000, 1316.336038, 1316.336038, 0.000000, X, Y) && !ellipse(32488.492000, 24518.258000, 283.192808, 193.802406, 90.756000, X, Y) && !ellipse(25860.526000, 27709.934000, 223.288006, 223.288006, 0.000000, X, Y) && !ellipse(30548.376221, 31265.165100, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24564.941132, 26145.689819, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28153.136230, 27863.631836, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26608.750200, 29462.641600, 339.794410, 339.794410, 0.000000, X, Y) && !ellipse(27545.315060, 28747.774986, 430.532812, 430.532812, 0.000000, X, Y) && !ellipse(25201.856110, 29883.766632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28523.122000, 23689.340200, 296.680809, 296.680809, 0.000000, X, Y) && !ellipse(22190.224200, 22944.892200, 364.664010, 364.664010, 0.000000, X, Y) && !ellipse(28574.534515, 25620.434753, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26243.689606, 27354.644135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23447.781799, 33238.173126, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32018.872000, 23994.502200, 753.465622, 306.879209, 293.729000, X, Y) && !ellipse(30688.458221, 31000.209106, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25395.667938, 28214.732910, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27400.005310, 24510.101501, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26634.470000, 28190.576000, 2420.848070, 2420.848070, 0.000000, X, Y) && !ellipse(29850.342468, 27690.969971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26179.770000, 29349.644000, 1210.424035, 1210.424035, 0.000000, X, Y) && !ellipse(27029.844000, 28307.566000, 1229.864035, 1229.864035, 0.000000, X, Y)
[Sat May 12 09:14:40 2012] Writing fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src73.gif
[Sat May 12 10:17:17 2012] Mean detx,y = (2374.29, 1522.23) 
[Sat May 12 10:17:20 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 12 10:19:15 2012] Binned source spectrum to 10 counts/bin
[Sat May 12 10:19:16 2012] Setting source spectrum file to fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src73_src_b10.pi.gz
[Sat May 12 10:19:16 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src73_bgd.pi.gz
[Sat May 12 14:51:51 2012] Updating aperture counts using extracted products
[Sat May 12 14:51:51 2012] Error reading totcts from fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src73_src_b10.pi.gz
[Sat May 12 14:51:55 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 12 14:51:55 2012] Using photon index=1.80, rate=0.00833, arf fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src73.arf
[Sat May 12 14:51:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 12 14:51:55 2012] Updating source flux to 9.3e-14
[Sat May 12 15:00:14 2012] Flag b found in src. 73 procflags, skipping spectral fitting
[Sat May 12 15:00:14 2012] Flag c found in src. 73 procflags, skipping spectral fitting