[Tue May  8 11:38:44 2012] Detection parameters:
  Position = (226.5, 277.3) = 0 43 20.22 41 13 48.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1805.8 +/- 50.2
  Background counts = 15.0
  Rate = 0.1 +/- 0.003

[Tue May  8 11:38:57 2012] Off-axis axis estimate = 5.44'
[Wed May  9 14:14:27 2012] Using EEF radius (= 9.15 ")to estimate initial spatial extent for simple fitting
[Wed May  9 14:14:27 2012] Initial guess for spatial extent in simple fitting = 9.15"
[Wed May  9 14:14:27 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.923
[Wed May  9 14:14:27 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 9.15"
[Thu May 10 00:41:28 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src6.ximg exists
[Thu May 10 00:41:28 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src6_1.ximg exists
[Thu May 10 00:41:28 2012] Fit fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src6 appears to have run properly
[Thu May 10 00:41:29 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Thu May 10 00:41:29 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Thu May 10 00:41:29 2012] Fit fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Thu May 10 00:43:42 2012] Spatial fit model total counts = 1843.550000, observed total counts = 1707.000000
[Thu May 10 00:43:42 2012] Offset between fit and detection position for source 6 = 0.151465 pixels
[Thu May 10 00:43:42 2012] 1856.448000 total counts/ 562.968000 bgd. counts: snr = 54.515232
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.151465 pixels
  Position = (226.5, 277.4) = 0 43 20.22 41 13 47.2
  Extent = 5.7 (5.5-6.1)" x 4.4 (4.2-4.7)", rotation angle = 248 (240-257) degrees
  Source counts = 1293.5 +/- 43.1
  Background counts = 563.0
  Rate = 0.06 +/- 0.002
[Thu May 10 00:43:43 2012] Vigneting correction estimate = 1.000000
[Thu May 10 00:43:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 10 00:43:43 2012] Assessing source extent using major axis lower bound
[Thu May 10 00:43:43 2012] Source does appear to be extended
[Thu May 10 00:43:43 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.17
[Fri May 11 00:01:22 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 11 00:01:22 2012] Initial guess for spatial extent in simple fitting = 5.09"
[Fri May 11 00:01:22 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.806
[Fri May 11 00:01:22 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 5.09"
[Fri May 11 08:45:32 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src6.ximg exists
[Fri May 11 08:45:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src6.csv
[Fri May 11 08:45:32 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src6_1.ximg exists
[Fri May 11 08:45:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src6.csv
[Fri May 11 08:45:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 11 08:45:34 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Fri May 11 08:45:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src6.csv
[Fri May 11 08:45:34 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Fri May 11 08:45:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src6.csv
[Fri May 11 08:45:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 11 08:47:01 2012] Warning, spatial fit 6 centroid is now closest to src. 26
[Fri May 11 08:47:02 2012] Vigneting correction estimate = 1.000000
[Fri May 11 08:47:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 11 08:47:02 2012] Assessing source extent using major axis lower bound
[Fri May 11 08:47:02 2012] Source does appear to be extended
[Fri May 11 08:47:02 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.17
[Sat May 12 09:14:37 2012] Counts = 1293.480000, rescaling region sizes by 2.000000
[Sat May 12 09:14:37 2012] XMMSAS src. selection expression = ellipse(19656.943600, 24089.484000, 689.322020, 533.293215, 247.652000, X, Y)
[Sat May 12 09:14:37 2012] Writing source region out to fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src6_src.reg
[Sat May 12 09:14:37 2012] Extracting stamp from image fullrun_mos2_xmm0505720401_pi300-10000_cl_sm2.00.img.gz, (187, 238) - (266, 317)
[Sat May 12 09:14:37 2012] XMMSAS bgd. selection expression = annulus(19656.943600, 24089.484000, 2297.740066, 4595.480132, X, Y) && !ellipse(21772.161001, 25378.069263, 488.896560, 381.081047, 246.423552, X, Y) && !ellipse(23463.514779, 26073.633108, 494.701919, 354.648880, 68.626725, X, Y) && !ellipse(24206.443146, 26897.044525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16468.524420, 23647.939200, 477.114414, 477.114414, 0.000000, X, Y) && !ellipse(16851.330978, 20406.747086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15812.379517, 25061.967926, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24564.941132, 26145.689819, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23472.181600, 19840.865600, 405.343362, 405.343362, 0.000000, X, Y) && !ellipse(24760.083130, 21094.774033, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22190.224200, 22944.892200, 364.664010, 364.664010, 0.000000, X, Y) && !ellipse(26634.470000, 28190.576000, 2420.848070, 2420.848070, 0.000000, X, Y) && !ellipse(26402.346000, 29037.592000, 2420.848070, 1215.072035, 323.851000, X, Y)
[Sat May 12 09:14:37 2012] Writing fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src6.gif
[Sat May 12 09:27:40 2012] Mean detx,y = (5850.28, -6161.35) 
[Sat May 12 09:27:42 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 12 09:28:30 2012] Binned source spectrum to 10 counts/bin
[Sat May 12 09:28:30 2012] Setting source spectrum file to fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sat May 12 09:28:30 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Sat May 12 14:51:46 2012] Updating aperture counts using extracted products
[Sat May 12 14:51:46 2012] Error reading totcts from fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sat May 12 14:51:51 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 12 14:51:51 2012] Using photon index=1.80, rate=0.0579, arf fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src6.arf
[Sat May 12 14:51:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 12 14:51:51 2012] Updating source flux to 9.1e-13