[Tue May  8 11:38:52 2012] Detection parameters:
  Position = (270.2, 229.1) = 0 43 3.35 41 10 15.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 148.0 +/- 15.5
  Background counts = 14.3
  Rate = 0.01 +/- 0.001

[Tue May  8 11:38:57 2012] Off-axis axis estimate = 5.42'
[Wed May  9 14:14:27 2012] Using EEF radius (= 9.14 ")to estimate initial spatial extent for simple fitting
[Wed May  9 14:14:27 2012] Initial guess for spatial extent in simple fitting = 9.14"
[Wed May  9 14:14:27 2012] source mask rpix=2.1, npix_max = 27, mask sum = 20, frac = 0.739
[Wed May  9 14:14:27 2012] Giving source the simple spatial ID 54 for pass 0, mean size = 9.14"
[Thu May 10 00:41:29 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src54.ximg exists
[Thu May 10 00:41:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src54.csv
[Thu May 10 00:41:29 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src54_1.ximg exists
[Thu May 10 00:41:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src54.csv
[Thu May 10 00:41:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src54_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 00:41:30 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src54.ximg exists
[Thu May 10 00:41:30 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src54_1.ximg exists
[Thu May 10 00:41:30 2012] Fit fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src54 appears to have run properly
[Thu May 10 00:43:42 2012] Spatial fit model total counts = 269.833000, observed total counts = 247.000000
[Thu May 10 00:43:42 2012] Offset between fit and detection position for source 58 = 0.545763 pixels
[Thu May 10 00:43:42 2012] 273.299000 total counts/ 167.504000 bgd. counts: snr = 8.174337
Spatial fit parameters:
  Offset between fit and detection position for source 58 = 0.545763 pixels
  Position = (270.4, 228.6) = 0 43 3.30 41 10 14.9
  Extent = 5.1 (3.9-6.2)", rotation angle = 0
  Source counts = 105.8 +/- 16.5
  Background counts = 167.5
  Rate = 0.005 +/- 0.0007
[Thu May 10 00:43:43 2012] Vigneting correction estimate = 1.000000
[Thu May 10 00:43:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 10 00:43:43 2012] Assessing source extent using major axis lower bound
[Thu May 10 00:43:43 2012] Source does appear to be extended
[Thu May 10 00:43:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 11 00:01:22 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 11 00:01:22 2012] Initial guess for spatial extent in simple fitting = 5.07"
[Fri May 11 00:01:22 2012] source mask rpix=1.2, npix_max = 11, mask sum = 6, frac = 0.541
[Fri May 11 00:01:22 2012] Giving source the simple spatial ID 54 for pass 1, mean size = 5.07"
[Fri May 11 08:45:33 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src54.ximg exists
[Fri May 11 08:45:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src54.csv
[Fri May 11 08:45:33 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src54_1.ximg exists
[Fri May 11 08:45:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src54.csv
[Fri May 11 08:45:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src54_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 11 08:45:35 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src54.ximg exists
[Fri May 11 08:45:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src54.csv
[Fri May 11 08:45:35 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src54_1.ximg exists
[Fri May 11 08:45:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src54.csv
[Fri May 11 08:45:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src54_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 11 08:47:02 2012] Warning, spatial fit 54 centroid is now closest to src. 88
[Fri May 11 08:47:02 2012] Vigneting correction estimate = 1.000000
[Fri May 11 08:47:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 11 08:47:02 2012] Assessing source extent using major axis lower bound
[Fri May 11 08:47:02 2012] Source does appear to be extended
[Fri May 11 08:47:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 12 09:14:39 2012] XMMSAS src. selection expression = ellipse(23472.181600, 19840.865600, 304.007522, 304.007522, 0.000000, X, Y)
[Sat May 12 09:14:39 2012] Writing source region out to fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src58_src.reg
[Sat May 12 09:14:39 2012] Extracting stamp from image fullrun_mos2_xmm0505720401_pi300-10000_cl_sm2.00.img.gz, (253, 211) - (288, 246)
[Sat May 12 09:14:39 2012] XMMSAS bgd. selection expression = annulus(23472.181600, 19840.865600, 506.679203, 1013.358405, X, Y) && !ellipse(24760.083130, 21094.774033, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 12 09:14:39 2012] Writing fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src58.gif
[Sat May 12 10:02:13 2012] Mean detx,y = (484.57, -8126.84) 
[Sat May 12 10:02:16 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 12 10:02:44 2012] Binned source spectrum to 10 counts/bin
[Sat May 12 10:02:44 2012] Setting source spectrum file to fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src58_src_b10.pi.gz
[Sat May 12 10:02:44 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src58_bgd.pi.gz
[Sat May 12 14:51:49 2012] Updating aperture counts using extracted products
[Sat May 12 14:51:49 2012] Error reading totcts from fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src58_src_b10.pi.gz
[Sat May 12 14:51:54 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 12 14:51:54 2012] Using photon index=1.80, rate=0.00473, arf fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src58.arf
[Sat May 12 14:51:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 12 14:51:54 2012] Updating source flux to 8e-14