[Tue May  8 11:38:49 2012] Detection parameters:
  Position = (395.0, 261.1) = 0 42 15.25 41 12 35.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 229.9 +/- 19.6
  Background counts = 19.3
  Rate = 0.01 +/- 0.001

[Tue May  8 11:38:57 2012] Off-axis axis estimate = 7.51'
[Wed May  9 14:14:27 2012] Using EEF radius (= 10.18 ")to estimate initial spatial extent for simple fitting
[Wed May  9 14:14:27 2012] Initial guess for spatial extent in simple fitting = 10.18"
[Wed May  9 14:14:27 2012] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.115
[Wed May  9 14:14:27 2012] Giving source the simple spatial ID 41 for pass 0, mean size = 10.18"
[Thu May 10 00:41:28 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src41.ximg exists
[Thu May 10 00:41:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src41.csv
[Thu May 10 00:41:28 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src41_1.ximg exists
[Thu May 10 00:41:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src41.csv
[Thu May 10 00:41:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 00:41:30 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src41.ximg exists
[Thu May 10 00:41:30 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src41_1.ximg exists
[Thu May 10 00:41:30 2012] Fit fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src41 appears to have run properly
[Thu May 10 00:43:42 2012] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 49 at 12.050603 pixels away
[Thu May 10 00:43:42 2012] Source 49 is offset by -0.122026 and -7.060227 pixels which is larger than
2 X fitted extent = 1.141637 x 1.141637, not incorporating fit results
[Thu May 10 00:43:42 2012] Warning, spatial fit 41 centroid is now closest to src. 86
[Thu May 10 00:43:43 2012] Vigneting correction estimate = 1.000000
[Thu May 10 00:43:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 10 00:43:43 2012] Assessing source extent using major
[Thu May 10 00:43:43 2012] Source does appear to be extended
[Thu May 10 00:43:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 10 00:43:43 2012] Source is confused with source 86
[Fri May 11 00:01:22 2012] Using EEF radius (= 10.18 ")to estimate initial spatial extent for simple fitting
[Fri May 11 00:01:22 2012] Initial guess for spatial extent in simple fitting = 10.18"
[Fri May 11 00:01:22 2012] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.115
[Fri May 11 00:01:22 2012] Giving source the simple spatial ID 41 for pass 1, mean size = 10.18"
[Fri May 11 08:45:32 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src41.ximg exists
[Fri May 11 08:45:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src41.csv
[Fri May 11 08:45:32 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src41_1.ximg exists
[Fri May 11 08:45:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src41.csv
[Fri May 11 08:45:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 11 08:45:35 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src41.ximg exists
[Fri May 11 08:45:35 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src41_1.ximg exists
[Fri May 11 08:45:35 2012] Fit fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src41 appears to have run properly
[Fri May 11 08:47:02 2012] Warning: source 41 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 49 at 10.161033 pixels away
[Fri May 11 08:47:02 2012] Warning: source 51 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 49 at 13.128553 pixels away
[Fri May 11 08:47:02 2012] Warning: source 73 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 49 at 16.313741 pixels away
[Fri May 11 08:47:02 2012] Vigneting correction estimate = 1.000000
[Fri May 11 08:47:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 11 08:47:02 2012] Assessing source extent using major
[Fri May 11 08:47:02 2012] Source does appear to be extended
[Fri May 11 08:47:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 12 09:14:38 2012] XMMSAS src. selection expression = ellipse(34317.463776, 22664.840210, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 12 09:14:38 2012] Writing source region out to fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src49_src.reg
[Sat May 12 09:14:38 2012] Extracting stamp from image fullrun_mos2_xmm0505720401_pi300-10000_cl_sm2.00.img.gz, (358, 224) - (433, 299)
[Sat May 12 09:14:38 2012] XMMSAS bgd. selection expression = annulus(34317.463776, 22664.840210, 1087.500000, 2175.000000, X, Y) && !ellipse(33506.323120, 24397.584015, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33567.055000, 22447.348200, 452.433613, 452.433613, 0.000000, X, Y) && !ellipse(32634.804000, 23835.503400, 328.176809, 328.176809, 0.000000, X, Y) && !ellipse(31317.904602, 19620.148193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32488.492000, 24518.258000, 283.192808, 193.802406, 90.756000, X, Y) && !ellipse(35083.535309, 20546.850327, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32018.872000, 23994.502200, 753.465622, 306.879209, 293.729000, X, Y) && !ellipse(34775.628000, 22909.249000, 1680.968048, 1680.968048, 0.000000, X, Y)
[Sat May 12 09:14:38 2012] Writing fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src49.gif
[Sat May 12 09:55:14 2012] Mean detx,y = (-7669.02, -586.50) 
[Sat May 12 09:55:16 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 12 09:55:43 2012] Binned source spectrum to 10 counts/bin
[Sat May 12 09:55:43 2012] Setting source spectrum file to fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Sat May 12 09:55:43 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src49_bgd.pi.gz
[Sat May 12 13:38:46 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat May 12 13:38:46 2012] rmf not generated due to insufficient counts
[Sat May 12 14:51:48 2012] Updating aperture counts using extracted products
[Sat May 12 14:51:49 2012] Error reading totcts from fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Sat May 12 14:51:53 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 12 14:51:53 2012] Using photon index=1.80, rate=0.0142, arf fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src49.arf
[Sat May 12 14:51:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 12 14:51:53 2012] Updating source flux to 2e-13
[Sat May 12 15:00:14 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting