[Tue May  8 11:38:49 2012] Detection parameters:
  Position = (324.1, 290.9) = 0 42 42.59 41 14 45.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 561.0 +/- 31.0
  Background counts = 48.1
  Rate = 0.03 +/- 0.001

[Tue May  8 11:38:57 2012] Off-axis axis estimate = 1.94'
[Wed May  9 14:14:27 2012] Using EEF radius (= 7.40 ")to estimate initial spatial extent for simple fitting
[Wed May  9 14:14:27 2012] Initial guess for spatial extent in simple fitting = 7.40"
[Wed May  9 14:14:27 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.826
[Wed May  9 14:14:27 2012] Giving source the simple spatial ID 30 for pass 0, mean size = 7.40"
[Thu May 10 00:41:28 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src30.ximg exists
[Thu May 10 00:41:28 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src30.csv
[Thu May 10 00:41:28 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src30_1.ximg exists
[Thu May 10 00:41:28 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src30.csv
[Thu May 10 00:41:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 00:41:30 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Thu May 10 00:41:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src30.csv
[Thu May 10 00:41:30 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Thu May 10 00:41:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src30.csv
[Thu May 10 00:41:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 00:43:42 2012] Spatial fit model total counts = 1864.760000, observed total counts = 1680.000000
[Thu May 10 00:43:42 2012] Poor agreement between spatial fit and data for source 45
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May 10 00:43:43 2012] Vigneting correction estimate = 1.000000
[Thu May 10 00:43:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 10 00:43:43 2012] Assessing source extent using major
[Thu May 10 00:43:43 2012] Source does appear to be extended
[Thu May 10 00:43:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 10 00:43:43 2012] Source is confused with source 80
[Fri May 11 00:01:22 2012] Using EEF radius (= 7.40 ")to estimate initial spatial extent for simple fitting
[Fri May 11 00:01:22 2012] Initial guess for spatial extent in simple fitting = 7.40"
[Fri May 11 00:01:22 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.826
[Fri May 11 00:01:22 2012] Giving source the simple spatial ID 30 for pass 1, mean size = 7.40"
[Fri May 11 08:45:32 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src30.ximg exists
[Fri May 11 08:45:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src30.csv
[Fri May 11 08:45:32 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src30_1.ximg exists
[Fri May 11 08:45:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src30.csv
[Fri May 11 08:45:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 11 08:45:35 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Fri May 11 08:45:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src30.csv
[Fri May 11 08:45:35 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Fri May 11 08:45:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src30.csv
[Fri May 11 08:45:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 11 08:47:01 2012] Spatial fit model total counts = 1859.360000, observed total counts = 1680.000000
[Fri May 11 08:47:01 2012] Poor agreement between spatial fit and data for source 45
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 11 08:47:02 2012] Vigneting correction estimate = 1.000000
[Fri May 11 08:47:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 11 08:47:02 2012] Assessing source extent using major
[Fri May 11 08:47:02 2012] Source does appear to be extended
[Fri May 11 08:47:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 12 09:14:38 2012] XMMSAS src. selection expression = ellipse(28146.185364, 25257.529419, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 12 09:14:38 2012] Writing source region out to fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src45_src.reg
[Sat May 12 09:14:38 2012] Extracting stamp from image fullrun_mos2_xmm0505720401_pi300-10000_cl_sm2.00.img.gz, (287, 253) - (362, 328)
[Sat May 12 09:14:38 2012] XMMSAS bgd. selection expression = annulus(28146.185364, 25257.529419, 1087.500000, 2175.000000, X, Y) && !ellipse(28879.408000, 26306.964000, 1206.928035, 1206.928035, 0.000000, X, Y) && !ellipse(26791.526200, 26033.006640, 516.259215, 516.259215, 0.000000, X, Y) && !ellipse(27741.665400, 26900.450800, 924.416027, 401.585612, 45.559000, X, Y) && !ellipse(27073.660400, 27284.633200, 476.670414, 476.670414, 0.000000, X, Y) && !ellipse(30675.607020, 27189.713400, 396.575211, 396.575211, 0.000000, X, Y) && !ellipse(30447.832600, 23442.410800, 427.864012, 427.864012, 0.000000, X, Y) && !ellipse(26390.762000, 25996.222000, 1056.896030, 1056.896030, 0.000000, X, Y) && !ellipse(28816.898840, 24920.444200, 326.355209, 326.355209, 0.000000, X, Y) && !ellipse(29555.716000, 26932.594000, 1316.336038, 1316.336038, 0.000000, X, Y) && !ellipse(28153.136230, 27863.631836, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28523.122000, 23689.340200, 296.680809, 296.680809, 0.000000, X, Y) && !ellipse(28574.534515, 25620.434753, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26243.689606, 27354.644135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25395.667938, 28214.732910, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27400.005310, 24510.101501, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26634.470000, 28190.576000, 2420.848070, 2420.848070, 0.000000, X, Y) && !ellipse(29850.342468, 27690.969971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26402.346000, 29037.592000, 2420.848070, 1215.072035, 323.851000, X, Y) && !ellipse(27029.844000, 28307.566000, 1229.864035, 1229.864035, 0.000000, X, Y)
[Sat May 12 09:14:38 2012] Writing fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src45.gif
[Sat May 12 09:49:38 2012] Mean detx,y = (-1128.05, -1097.77) 
[Sat May 12 09:49:40 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 12 09:50:01 2012] Binned source spectrum to 10 counts/bin
[Sat May 12 09:50:01 2012] Setting source spectrum file to fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Sat May 12 09:50:01 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src45_bgd.pi.gz
[Sat May 12 12:48:26 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat May 12 12:48:26 2012] rmf not generated due to insufficient counts
[Sat May 12 14:51:48 2012] Updating aperture counts using extracted products
[Sat May 12 14:51:48 2012] Error reading totcts from fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Sat May 12 14:51:53 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 12 14:51:53 2012] Using photon index=1.80, rate=0.026, arf fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src45.arf
[Sat May 12 14:51:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 12 14:51:53 2012] Updating source flux to 2.5e-13
[Sat May 12 15:00:14 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting