[Tue May  8 11:38:49 2012] Detection parameters:
  Position = (346.1, 312.3) = 0 42 34.09 41 16 19.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 296.3 +/- 24.5
  Background counts = 38.2
  Rate = 0.01 +/- 0.001

[Tue May  8 11:38:57 2012] Off-axis axis estimate = 3.60'
[Wed May  9 14:14:27 2012] Using EEF radius (= 8.23 ")to estimate initial spatial extent for simple fitting
[Wed May  9 14:14:27 2012] Initial guess for spatial extent in simple fitting = 8.23"
[Wed May  9 14:14:27 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.874
[Wed May  9 14:14:27 2012] Giving source the simple spatial ID 40 for pass 0, mean size = 8.23"
[Thu May 10 00:41:28 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src40.ximg exists
[Thu May 10 00:41:28 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src40_1.ximg exists
[Thu May 10 00:41:28 2012] Fit fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src40 appears to have run properly
[Thu May 10 00:41:30 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src40.ximg exists
[Thu May 10 00:41:30 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src40_1.ximg exists
[Thu May 10 00:41:30 2012] Fit fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src40 appears to have run properly
[Thu May 10 00:43:42 2012] Spatial fit model total counts = 2261.910000, observed total counts = 2256.000000
[Thu May 10 00:43:42 2012] Offset between fit and detection position for source 43 = 6.187868 pixels
[Thu May 10 00:43:42 2012] 1398.896000 total counts/ 915.668000 bgd. counts: snr = 15.969197
Spatial fit parameters:
  Offset between fit and detection position for source 43 = 6.187868 pixels
  Position = (340.3, 310.1) = 0 42 36.34 41 16 9.5
  Extent = 16.5 (16.4-32.9)", rotation angle = 0
  Source counts = 483.2 +/- 37.4
  Background counts = 915.7
  Rate = 0.02 +/- 0.002
[Thu May 10 00:43:43 2012] Source 43 is offset by 4.843655 and -2.307172 pixels which is larger than
2 X fitted extent = 3.038285 x 3.038285, not incorporating fit results
[Thu May 10 00:43:43 2012] Vigneting correction estimate = 1.000000
[Thu May 10 00:43:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 10 00:43:43 2012] Assessing source extent using major axis lower bound
[Thu May 10 00:43:43 2012] Source does appear to be extended
[Thu May 10 00:43:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 10 00:43:43 2012] Source is confused with source 3
[Fri May 11 00:01:22 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 11 00:01:22 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 11 00:01:22 2012] Initial guess for spatial extent in simple fitting = 16.45"
[Fri May 11 00:01:22 2012] source mask rpix=3.8, npix_max = 73, mask sum = 72, frac = 0.981
[Fri May 11 00:01:22 2012] Giving source the simple spatial ID 40 for pass 1, mean size = 16.45"
[Fri May 11 08:45:32 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src40.ximg exists
[Fri May 11 08:45:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src40.csv
[Fri May 11 08:45:32 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src40_1.ximg exists
[Fri May 11 08:45:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src40.csv
[Fri May 11 08:45:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 11 08:45:35 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src40.ximg exists
[Fri May 11 08:45:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src40.csv
[Fri May 11 08:45:35 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src40_1.ximg exists
[Fri May 11 08:45:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src40.csv
[Fri May 11 08:45:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 11 08:47:02 2012] Warning, spatial fit 40 centroid is now closest to src. 40
[Fri May 11 08:47:02 2012] Source 43 is offset by 4.843655 and -2.307172 pixels which is larger than
2 X fitted extent = 3.104717 x 3.104717, not incorporating fit results
[Fri May 11 08:47:02 2012] Vigneting correction estimate = 1.000000
[Fri May 11 08:47:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 11 08:47:02 2012] Assessing source extent using major axis lower bound
[Fri May 11 08:47:02 2012] Source does appear to be extended
[Fri May 11 08:47:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 12 09:14:38 2012] XMMSAS src. selection expression = ellipse(29555.716000, 26932.594000, 987.252028, 987.252028, 0.000000, X, Y)
[Sat May 12 09:14:38 2012] Writing source region out to fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src43_src.reg
[Sat May 12 09:14:38 2012] Extracting stamp from image fullrun_mos2_xmm0505720401_pi300-10000_cl_sm2.00.img.gz, (284, 253) - (397, 367)
[Sat May 12 09:14:38 2012] XMMSAS bgd. selection expression = annulus(29555.716000, 26932.594000, 1645.420047, 3290.840095, X, Y) && !ellipse(28879.408000, 26306.964000, 1206.928035, 1206.928035, 0.000000, X, Y) && !ellipse(26791.526200, 26033.006640, 516.259215, 516.259215, 0.000000, X, Y) && !ellipse(27741.665400, 26900.450800, 924.416027, 401.585612, 45.559000, X, Y) && !ellipse(27073.660400, 27284.633200, 476.670414, 476.670414, 0.000000, X, Y) && !ellipse(25860.048101, 30257.847567, 407.376405, 363.736922, 0.000000, X, Y) && !ellipse(30675.607020, 27189.713400, 396.575211, 396.575211, 0.000000, X, Y) && !ellipse(30447.832600, 23442.410800, 427.864012, 427.864012, 0.000000, X, Y) && !ellipse(32519.374000, 26278.084000, 305.292009, 266.648008, 33.416000, X, Y) && !ellipse(33506.323120, 24397.584015, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32775.312000, 26685.312000, 446.664813, 446.664813, 0.000000, X, Y) && !ellipse(26390.762000, 25996.222000, 1056.896030, 1056.896030, 0.000000, X, Y) && !ellipse(32634.804000, 23835.503400, 328.176809, 328.176809, 0.000000, X, Y) && !ellipse(28634.615000, 30056.163400, 378.471211, 378.471211, 0.000000, X, Y) && !ellipse(28146.185364, 25257.529419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31814.807934, 30666.969575, 486.865161, 298.419183, 38.620593, X, Y) && !ellipse(28816.898840, 24920.444200, 326.355209, 326.355209, 0.000000, X, Y) && !ellipse(32488.492000, 24518.258000, 283.192808, 193.802406, 90.756000, X, Y) && !ellipse(28153.136230, 27863.631836, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26608.750200, 29462.641600, 339.794410, 339.794410, 0.000000, X, Y) && !ellipse(27545.315060, 28747.774986, 430.532812, 430.532812, 0.000000, X, Y) && !ellipse(28523.122000, 23689.340200, 296.680809, 296.680809, 0.000000, X, Y) && !ellipse(28574.534515, 25620.434753, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26243.689606, 27354.644135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32018.872000, 23994.502200, 753.465622, 306.879209, 293.729000, X, Y) && !ellipse(30688.458221, 31000.209106, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25395.667938, 28214.732910, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27400.005310, 24510.101501, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26634.470000, 28190.576000, 2420.848070, 2420.848070, 0.000000, X, Y) && !ellipse(29850.342468, 27690.969971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26402.346000, 29037.592000, 2420.848070, 1215.072035, 323.851000, X, Y) && !ellipse(26179.770000, 29349.644000, 1210.424035, 1210.424035, 0.000000, X, Y) && !ellipse(27029.844000, 28307.566000, 1229.864035, 1229.864035, 0.000000, X, Y)
[Sat May 12 09:14:38 2012] Writing fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src43.gif
[Sat May 12 09:54:33 2012] Mean detx,y = (-1197.11, 696.63) 
[Sat May 12 09:54:35 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 12 09:55:08 2012] Binned source spectrum to 10 counts/bin
[Sat May 12 09:55:08 2012] Setting source spectrum file to fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Sat May 12 09:55:08 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src43_bgd.pi.gz
[Sat May 12 14:51:48 2012] Updating aperture counts using extracted products
[Sat May 12 14:51:48 2012] Error reading totcts from fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Sat May 12 14:51:53 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 12 14:51:53 2012] Using photon index=1.80, rate=0.0216, arf fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src43.arf
[Sat May 12 14:51:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 12 14:51:53 2012] Updating source flux to 2e-13
[Sat May 12 15:00:14 2012] Flag b found in src. 43 procflags, skipping spectral fitting
[Sat May 12 15:00:14 2012] Flag c found in src. 43 procflags, skipping spectral fitting