[Tue May  8 11:38:48 2012] Detection parameters:
  Position = (409.3, 332.8) = 0 42 9.68 41 17 46.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 164.7 +/- 17.1
  Background counts = 16.3
  Rate = 0.01 +/- 0.001

[Tue May  8 11:38:57 2012] Off-axis axis estimate = 8.42'
[Wed May  9 14:14:27 2012] Using EEF radius (= 10.64 ")to estimate initial spatial extent for simple fitting
[Wed May  9 14:14:27 2012] Initial guess for spatial extent in simple fitting = 10.64"
[Wed May  9 14:14:27 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.038
[Wed May  9 14:14:27 2012] Giving source the simple spatial ID 49 for pass 0, mean size = 10.64"
[Thu May 10 00:41:28 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src49.ximg exists
[Thu May 10 00:41:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src49.csv
[Thu May 10 00:41:28 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src49_1.ximg exists
[Thu May 10 00:41:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src49.csv
[Thu May 10 00:41:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 00:41:30 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src49.ximg exists
[Thu May 10 00:41:30 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src49_1.ximg exists
[Thu May 10 00:41:30 2012] Fit fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src49 appears to have run properly
[Thu May 10 00:43:42 2012] Warning, spatial fit 49 centroid is now closest to src. 22
[Thu May 10 00:43:43 2012] Vigneting correction estimate = 1.000000
[Thu May 10 00:43:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 10 00:43:43 2012] Assessing source extent using major
[Thu May 10 00:43:43 2012] Source does appear to be extended
[Thu May 10 00:43:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 11 00:01:22 2012] Using EEF radius (= 10.64 ")to estimate initial spatial extent for simple fitting
[Fri May 11 00:01:22 2012] Initial guess for spatial extent in simple fitting = 10.64"
[Fri May 11 00:01:22 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.038
[Fri May 11 00:01:22 2012] Giving source the simple spatial ID 49 for pass 1, mean size = 10.64"
[Fri May 11 08:45:33 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src49.ximg exists
[Fri May 11 08:45:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src49.csv
[Fri May 11 08:45:33 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src49_1.ximg exists
[Fri May 11 08:45:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src49.csv
[Fri May 11 08:45:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 11 08:45:35 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src49.ximg exists
[Fri May 11 08:45:35 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src49_1.ximg exists
[Fri May 11 08:45:35 2012] Fit fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src49 appears to have run properly
[Fri May 11 08:47:02 2012] Warning, spatial fit 49 centroid is now closest to src. 22
[Fri May 11 08:47:02 2012] Vigneting correction estimate = 1.000000
[Fri May 11 08:47:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 11 08:47:02 2012] Assessing source extent using major
[Fri May 11 08:47:02 2012] Source does appear to be extended
[Fri May 11 08:47:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 12 09:14:38 2012] XMMSAS src. selection expression = ellipse(35562.677826, 28901.408447, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 12 09:14:38 2012] Writing source region out to fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src39_src.reg
[Sat May 12 09:14:38 2012] Extracting stamp from image fullrun_mos2_xmm0505720401_pi300-10000_cl_sm2.00.img.gz, (372, 295) - (447, 370)
[Sat May 12 09:14:38 2012] XMMSAS bgd. selection expression = annulus(35562.677826, 28901.408447, 1087.500000, 2175.000000, X, Y) && !ellipse(34727.456000, 29868.982000, 253.996807, 253.996807, 0.000000, X, Y) && !ellipse(35947.248000, 29459.162000, 286.765608, 286.765608, 0.000000, X, Y) && !ellipse(34945.338360, 29144.016600, 310.616009, 310.616009, 0.000000, X, Y) && !ellipse(34150.193420, 28366.122400, 323.913609, 323.913609, 0.000000, X, Y) && !ellipse(35010.670685, 27737.807343, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34270.761810, 29200.455017, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 12 09:14:38 2012] Writing fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src39.gif
[Sat May 12 09:59:38 2012] Mean detx,y = (-5830.89, 5662.50) 
[Sat May 12 09:59:40 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 12 10:00:28 2012] Binned source spectrum to 10 counts/bin
[Sat May 12 10:00:28 2012] Setting source spectrum file to fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Sat May 12 10:00:28 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src39_bgd.pi.gz
[Sat May 12 13:47:43 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat May 12 13:47:43 2012] rmf not generated due to insufficient counts
[Sat May 12 14:51:49 2012] Updating aperture counts using extracted products
[Sat May 12 14:51:49 2012] Error reading totcts from fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Sat May 12 14:51:54 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 12 14:51:54 2012] Using photon index=1.80, rate=0.0112, arf fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src39.arf
[Sat May 12 14:51:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 12 14:51:54 2012] Updating source flux to 1.7e-13
[Sat May 12 15:00:14 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting