[Tue May  8 11:38:48 2012] Detection parameters:
  Position = (402.4, 335.8) = 0 42 12.36 41 17 59.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 381.2 +/- 25.0
  Background counts = 17.5
  Rate = 0.02 +/- 0.002

[Tue May  8 11:38:57 2012] Off-axis axis estimate = 8.01'
[Wed May  9 14:14:27 2012] Using EEF radius (= 10.43 ")to estimate initial spatial extent for simple fitting
[Wed May  9 14:14:27 2012] Initial guess for spatial extent in simple fitting = 10.43"
[Wed May  9 14:14:27 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.071
[Wed May  9 14:14:27 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 10.43"
[Thu May 10 00:41:28 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src31.ximg exists
[Thu May 10 00:41:28 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src31.csv
[Thu May 10 00:41:28 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src31_1.ximg exists
[Thu May 10 00:41:28 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src31.csv
[Thu May 10 00:41:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 00:41:30 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Thu May 10 00:41:30 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Thu May 10 00:41:30 2012] Fit fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src31 appears to have run properly
[Thu May 10 00:43:42 2012] Spatial fit model total counts = 1271.910000, observed total counts = 1255.000000
[Thu May 10 00:43:42 2012] Offset between fit and detection position for source 38 = 0.305062 pixels
[Thu May 10 00:43:42 2012] 1278.909000 total counts/ 1113.660000 bgd. counts: snr = 4.951794
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 0.305062 pixels
  Position = (402.2, 335.5) = 0 42 12.41 41 17 59.7
  Extent = 3.5 (3.2-4.2)", rotation angle = 0
  Source counts = 165.2 +/- 35.8
  Background counts = 1113.7
  Rate = 0.007 +/- 0.002
[Thu May 10 00:43:43 2012] Vigneting correction estimate = 1.000000
[Thu May 10 00:43:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 10 00:43:43 2012] Assessing source extent using major axis lower bound
[Thu May 10 00:43:43 2012] Source does appear to be extended
[Thu May 10 00:43:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 11 00:01:22 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 11 00:01:22 2012] Initial guess for spatial extent in simple fitting = 3.55"
[Fri May 11 00:01:22 2012] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.300
[Fri May 11 00:01:22 2012] Giving source the simple spatial ID 31 for pass 1, mean size = 3.55"
[Fri May 11 08:45:32 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src31.ximg exists
[Fri May 11 08:45:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src31.csv
[Fri May 11 08:45:32 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src31_1.ximg exists
[Fri May 11 08:45:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src31.csv
[Fri May 11 08:45:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 11 08:45:35 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Fri May 11 08:45:35 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Fri May 11 08:45:35 2012] Fit fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src31 appears to have run properly
[Fri May 11 08:47:02 2012] Spatial fit model total counts = 957.948000, observed total counts = 961.000000
[Fri May 11 08:47:02 2012] Offset between fit and detection position for source 38 = 0.003127 pixels
[Fri May 11 08:47:02 2012] 997.246000 total counts/ 818.121000 bgd. counts: snr = 6.262496
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 0.003127 pixels
  Position = (402.2, 335.5) = 0 42 12.42 41 17 59.7
  Extent = 3.9 (3.3-4.5)", rotation angle = 0
  Source counts = 179.1 +/- 31.6
  Background counts = 818.1
  Rate = 0.008 +/- 0.001
[Fri May 11 08:47:02 2012] Vigneting correction estimate = 1.000000
[Fri May 11 08:47:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 11 08:47:02 2012] Assessing source extent using major axis lower bound
[Fri May 11 08:47:02 2012] Source does appear to be extended
[Fri May 11 08:47:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 12 09:14:38 2012] XMMSAS src. selection expression = ellipse(34945.338360, 29144.016600, 232.962007, 232.962007, 0.000000, X, Y)
[Sat May 12 09:14:38 2012] Writing source region out to fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src38_src.reg
[Sat May 12 09:14:38 2012] Extracting stamp from image fullrun_mos2_xmm0505720401_pi300-10000_cl_sm2.00.img.gz, (389, 322) - (416, 349)
[Sat May 12 09:14:38 2012] XMMSAS bgd. selection expression = annulus(34945.338360, 29144.016600, 388.270011, 776.540022, X, Y) && !ellipse(34727.456000, 29868.982000, 253.996807, 253.996807, 0.000000, X, Y) && !ellipse(35947.248000, 29459.162000, 286.765608, 286.765608, 0.000000, X, Y) && !ellipse(35562.677826, 28901.408447, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34150.193420, 28366.122400, 323.913609, 323.913609, 0.000000, X, Y) && !ellipse(35010.670685, 27737.807343, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34270.761810, 29200.455017, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 12 09:14:38 2012] Writing fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src38.gif
[Sat May 12 09:50:07 2012] Mean detx,y = (-5259.49, 5466.76) 
[Sat May 12 09:50:09 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 12 09:50:24 2012] Binned source spectrum to 10 counts/bin
[Sat May 12 09:50:24 2012] Setting source spectrum file to fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Sat May 12 09:50:24 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src38_bgd.pi.gz
[Sat May 12 14:51:48 2012] Updating aperture counts using extracted products
[Sat May 12 14:51:48 2012] Error reading totcts from fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Sat May 12 14:51:53 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 12 14:51:53 2012] Using photon index=1.80, rate=0.00801, arf fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src38.arf
[Sat May 12 14:51:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 12 14:51:53 2012] Updating source flux to 2e-13