[Tue May  8 11:38:43 2012] Detection parameters:
  Position = (333.9, 309.0) = 0 42 38.79 41 16 4.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 9804.2 +/- 117.8
  Background counts = 43.1
  Rate = 0.5 +/- 0.006

[Tue May  8 11:38:57 2012] Off-axis axis estimate = 2.68'
[Wed May  9 14:14:27 2012] Using EEF radius (= 7.77 ")to estimate initial spatial extent for simple fitting
[Wed May  9 14:14:27 2012] Initial guess for spatial extent in simple fitting = 7.77"
[Wed May  9 14:14:27 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.765
[Wed May  9 14:14:27 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.77"
[Thu May 10 00:41:27 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src1.ximg exists
[Thu May 10 00:41:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src1.csv
[Thu May 10 00:41:27 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu May 10 00:41:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src1.csv
[Thu May 10 00:41:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 00:41:29 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu May 10 00:41:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu May 10 00:41:29 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu May 10 00:41:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu May 10 00:41:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 00:43:42 2012] Spatial fit model total counts = 12276.100000, observed total counts = 10178.000000
[Thu May 10 00:43:42 2012] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May 10 00:43:42 2012] Spatial fit model total counts = 2498.250000, observed total counts = 2279.000000
[Thu May 10 00:43:42 2012] Offset between fit and detection position for source 3 = 6.353215 pixels
[Thu May 10 00:43:42 2012] Warning, changing simple spatial fit ID from 1 to 59
[Thu May 10 00:43:42 2012] 2186.120000 total counts/ 2039.150000 bgd. counts: snr = 3.254649
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 6.353215 pixels
  Position = (335.9, 302.9) = 0 42 38.04 41 15 38.2
  Extent = 15.1 (15.1-30.2)", rotation angle = 0
  Source counts = 147.0 +/- 46.8
  Background counts = 2039.2
  Rate = 0.007 +/- 0.002
[Thu May 10 00:43:43 2012] Vigneting correction estimate = 1.000000
[Thu May 10 00:43:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 10 00:43:43 2012] Assessing source extent using major axis lower bound
[Thu May 10 00:43:43 2012] Source does appear to be extended
[Thu May 10 00:43:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 10 00:43:43 2012] Source is confused with source 43
[Fri May 11 00:01:22 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 11 00:01:22 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 11 00:01:22 2012] Initial guess for spatial extent in simple fitting = 15.09"
[Fri May 11 00:01:22 2012] source mask rpix=3.5, npix_max = 62, mask sum = 64, frac = 1.016
[Fri May 11 00:01:22 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 15.09"
[Fri May 11 08:45:32 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src1.ximg exists
[Fri May 11 08:45:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src1.csv
[Fri May 11 08:45:32 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri May 11 08:45:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src1.csv
[Fri May 11 08:45:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 11 08:45:34 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri May 11 08:45:34 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri May 11 08:45:34 2012] Fit fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri May 11 08:47:01 2012] Source 3 is offset by 2.060320 and -6.007471 pixels which is larger than
2 X fitted extent = 2.453963 x 2.453963, not incorporating fit results
[Fri May 11 08:47:02 2012] Spatial fit model total counts = 2470.610000, observed total counts = 2279.000000
[Fri May 11 08:47:02 2012] Offset between fit and detection position for source 3 = 3.353080 pixels
[Fri May 11 08:47:02 2012] Warning, changing simple spatial fit ID from 1 to 59
[Fri May 11 08:47:02 2012] 2211.675000 total counts/ 1799.040000 bgd. counts: snr = 9.728495
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 3.353080 pixels
  Position = (332.5, 302.9) = 0 42 39.34 41 15 38.2
  Extent = 15.1 (15.0-30.2)", rotation angle = 0
  Source counts = 412.6 +/- 47.0
  Background counts = 1799.0
  Rate = 0.02 +/- 0.002
[Fri May 11 08:47:02 2012] Vigneting correction estimate = 1.000000
[Fri May 11 08:47:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 11 08:47:02 2012] Assessing source extent using major axis lower bound
[Fri May 11 08:47:02 2012] Source does appear to be extended
[Fri May 11 08:47:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 12 09:14:36 2012] XMMSAS src. selection expression = ellipse(28879.408000, 26306.964000, 905.196026, 905.196026, 0.000000, X, Y)
[Sat May 12 09:14:36 2012] Writing source region out to fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src3_src.reg
[Sat May 12 09:14:36 2012] Extracting stamp from image fullrun_mos2_xmm0505720401_pi300-10000_cl_sm2.00.img.gz, (280, 251) - (385, 355)
[Sat May 12 09:14:36 2012] XMMSAS bgd. selection expression = annulus(28879.408000, 26306.964000, 1508.660043, 3017.320087, X, Y) && !ellipse(26791.526200, 26033.006640, 516.259215, 516.259215, 0.000000, X, Y) && !ellipse(27741.665400, 26900.450800, 924.416027, 401.585612, 45.559000, X, Y) && !ellipse(27073.660400, 27284.633200, 476.670414, 476.670414, 0.000000, X, Y) && !ellipse(30675.607020, 27189.713400, 396.575211, 396.575211, 0.000000, X, Y) && !ellipse(30447.832600, 23442.410800, 427.864012, 427.864012, 0.000000, X, Y) && !ellipse(26390.762000, 25996.222000, 1056.896030, 1056.896030, 0.000000, X, Y) && !ellipse(28146.185364, 25257.529419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28816.898840, 24920.444200, 326.355209, 326.355209, 0.000000, X, Y) && !ellipse(29555.716000, 26932.594000, 1316.336038, 1316.336038, 0.000000, X, Y) && !ellipse(25860.526000, 27709.934000, 223.288006, 223.288006, 0.000000, X, Y) && !ellipse(28153.136230, 27863.631836, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26608.750200, 29462.641600, 339.794410, 339.794410, 0.000000, X, Y) && !ellipse(27545.315060, 28747.774986, 430.532812, 430.532812, 0.000000, X, Y) && !ellipse(25201.856110, 29883.766632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28523.122000, 23689.340200, 296.680809, 296.680809, 0.000000, X, Y) && !ellipse(28574.534515, 25620.434753, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26243.689606, 27354.644135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32018.872000, 23994.502200, 753.465622, 306.879209, 293.729000, X, Y) && !ellipse(25395.667938, 28214.732910, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27400.005310, 24510.101501, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26634.470000, 28190.576000, 2420.848070, 2420.848070, 0.000000, X, Y) && !ellipse(29850.342468, 27690.969971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26402.346000, 29037.592000, 2420.848070, 1215.072035, 323.851000, X, Y) && !ellipse(26179.770000, 29349.644000, 1210.424035, 1210.424035, 0.000000, X, Y) && !ellipse(27029.844000, 28307.566000, 1229.864035, 1229.864035, 0.000000, X, Y)
[Sat May 12 09:14:36 2012] Writing fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src3.gif
[Sat May 12 09:14:46 2012] Mean detx,y = (-1087.96, 452.38) 
[Sat May 12 09:14:48 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 12 09:15:10 2012] Binned source spectrum to 10 counts/bin
[Sat May 12 09:15:11 2012] Setting source spectrum file to fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat May 12 09:15:11 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sat May 12 14:51:45 2012] Updating aperture counts using extracted products
[Sat May 12 14:51:45 2012] Error reading totcts from fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat May 12 14:51:51 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 12 14:51:51 2012] Using photon index=1.80, rate=0.0185, arf fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src3.arf
[Sat May 12 14:51:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 12 14:51:51 2012] Updating source flux to 1.7e-13
[Sat May 12 15:00:13 2012] Flag b found in src. 3 procflags, skipping spectral fitting
[Sat May 12 15:00:13 2012] Flag p found in src. 3 procflags, skipping spectral fitting
[Sat May 12 15:00:13 2012] Flag c found in src. 3 procflags, skipping spectral fitting
[Sat May 12 15:10:29 2012] Reading fit data from xmm0505720401/analysis//spectral/fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src3_pl.csv
[Sat May 12 15:10:29 2012] Spectral fit parameter nH value = 9.62381e+20
[Sat May 12 15:10:29 2012] Spectral fit parameter PhoIndex value = 1.74405
[Sat May 12 15:10:29 2012] Failed to get F(0.3-8.0) from xmm0505720401/analysis//spectral/fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Sat May 12 15:10:29 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 12 15:10:29 2012] Using Nh = 9.6e+20, photon index=1.74, rate=0.0185, arf fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src3.arf
[Sat May 12 15:10:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 12 15:10:29 2012] Updating source flux to 1.9e-13