[Tue May  8 11:38:47 2012] Detection parameters:
  Position = (279.5, 354.0) = 0 42 59.79 41 19 20.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 951.0 +/- 37.9
  Background counts = 23.8
  Rate = 0.05 +/- 0.002

[Tue May  8 11:38:57 2012] Off-axis axis estimate = 4.26'
[Wed May  9 14:14:27 2012] Using EEF radius (= 8.56 ")to estimate initial spatial extent for simple fitting
[Wed May  9 14:14:27 2012] Initial guess for spatial extent in simple fitting = 8.56"
[Wed May  9 14:14:27 2012] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.822
[Wed May  9 14:14:27 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 8.56"
[Thu May 10 00:41:28 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src18.ximg exists
[Thu May 10 00:41:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src18.csv
[Thu May 10 00:41:28 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src18_1.ximg exists
[Thu May 10 00:41:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src18.csv
[Thu May 10 00:41:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 00:41:30 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Thu May 10 00:41:30 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Thu May 10 00:41:30 2012] Fit fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Thu May 10 00:43:42 2012] Spatial fit model total counts = 1039.000000, observed total counts = 1039.000000
[Thu May 10 00:43:42 2012] Offset between fit and detection position for source 28 = 0.156326 pixels
[Thu May 10 00:43:42 2012] 1032.951000 total counts/ 406.906000 bgd. counts: snr = 31.035483
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.156326 pixels
  Position = (279.3, 354.0) = 0 42 59.86 41 19 20.2
  Extent = 4.8 (4.4-5.1)", rotation angle = 0
  Source counts = 626.0 +/- 32.1
  Background counts = 406.9
  Rate = 0.03 +/- 0.001
[Thu May 10 00:43:43 2012] Vigneting correction estimate = 1.000000
[Thu May 10 00:43:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 10 00:43:43 2012] Assessing source extent using major axis lower bound
[Thu May 10 00:43:43 2012] Source does appear to be extended
[Thu May 10 00:43:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 11 00:01:22 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 11 00:01:22 2012] Initial guess for spatial extent in simple fitting = 4.75"
[Fri May 11 00:01:22 2012] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.183
[Fri May 11 00:01:22 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 4.75"
[Fri May 11 08:45:32 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src18.ximg exists
[Fri May 11 08:45:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src18.csv
[Fri May 11 08:45:32 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src18_1.ximg exists
[Fri May 11 08:45:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src18.csv
[Fri May 11 08:45:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 11 08:45:34 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Fri May 11 08:45:34 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Fri May 11 08:45:34 2012] Fit fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src18 appears to have run properly
[Fri May 11 08:47:01 2012] Warning, spatial fit 18 centroid is now closest to src. 68
[Fri May 11 08:47:02 2012] Vigneting correction estimate = 1.000000
[Fri May 11 08:47:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 11 08:47:02 2012] Assessing source extent using major axis lower bound
[Fri May 11 08:47:02 2012] Source does appear to be extended
[Fri May 11 08:47:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 12 09:14:37 2012] XMMSAS src. selection expression = ellipse(24253.839000, 30746.141200, 285.187808, 285.187808, 0.000000, X, Y)
[Sat May 12 09:14:37 2012] Writing source region out to fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src28_src.reg
[Sat May 12 09:14:37 2012] Extracting stamp from image fullrun_mos2_xmm0505720401_pi300-10000_cl_sm2.00.img.gz, (263, 338) - (296, 370)
[Sat May 12 09:14:37 2012] XMMSAS bgd. selection expression = annulus(24253.839000, 30746.141200, 475.313014, 950.626027, X, Y) && !ellipse(25201.856110, 29883.766632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26634.470000, 28190.576000, 2420.848070, 2420.848070, 0.000000, X, Y) && !ellipse(26402.346000, 29037.592000, 2420.848070, 1215.072035, 323.851000, X, Y) && !ellipse(26179.770000, 29349.644000, 1210.424035, 1210.424035, 0.000000, X, Y)
[Sat May 12 09:14:37 2012] Writing fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src28.gif
[Sat May 12 09:41:41 2012] Mean detx,y = (4931.85, 1846.75) 
[Sat May 12 09:41:43 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 12 09:41:57 2012] Binned source spectrum to 10 counts/bin
[Sat May 12 09:41:58 2012] Setting source spectrum file to fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Sat May 12 09:41:58 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Sat May 12 14:51:47 2012] Updating aperture counts using extracted products
[Sat May 12 14:51:47 2012] Error reading totcts from fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Sat May 12 14:51:52 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 12 14:51:52 2012] Using photon index=1.80, rate=0.028, arf fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src28.arf
[Sat May 12 14:51:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 12 14:51:52 2012] Updating source flux to 5e-13