[Tue May  8 11:38:46 2012] Detection parameters:
  Position = (297.9, 303.3) = 0 42 52.70 41 15 41.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1025.9 +/- 41.3
  Background counts = 44.5
  Rate = 0.05 +/- 0.002

[Tue May  8 11:38:57 2012] Off-axis axis estimate = 0.35'
[Wed May  9 14:14:27 2012] Using EEF radius (= 6.61 ")to estimate initial spatial extent for simple fitting
[Wed May  9 14:14:27 2012] Initial guess for spatial extent in simple fitting = 6.61"
[Wed May  9 14:14:27 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.982
[Wed May  9 14:14:27 2012] Giving source the simple spatial ID 22 for pass 0, mean size = 6.61"
[Thu May 10 00:41:28 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src22.ximg exists
[Thu May 10 00:41:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src22.csv
[Thu May 10 00:41:28 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src22_1.ximg exists
[Thu May 10 00:41:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src22.csv
[Thu May 10 00:41:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 00:41:30 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Thu May 10 00:41:30 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Thu May 10 00:41:30 2012] Fit fullrun_mos2_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src22 appears to have run properly
[Thu May 10 00:43:42 2012] Source 25 is offset by 5.945483 and -5.599750 pixels which is larger than
2 X fitted extent = 1.884501 x 1.884501, not incorporating fit results
[Thu May 10 00:43:43 2012] Vigneting correction estimate = 1.000000
[Thu May 10 00:43:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 10 00:43:43 2012] Assessing source extent using major
[Thu May 10 00:43:43 2012] Source does appear to be extended
[Thu May 10 00:43:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 11 00:01:22 2012] Using EEF radius (= 6.61 ")to estimate initial spatial extent for simple fitting
[Fri May 11 00:01:22 2012] Initial guess for spatial extent in simple fitting = 6.61"
[Fri May 11 00:01:22 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.982
[Fri May 11 00:01:22 2012] Giving source the simple spatial ID 22 for pass 1, mean size = 6.61"
[Fri May 11 08:45:32 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src22.ximg exists
[Fri May 11 08:45:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src22.csv
[Fri May 11 08:45:32 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src22_1.ximg exists
[Fri May 11 08:45:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src22.csv
[Fri May 11 08:45:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 11 08:45:34 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Fri May 11 08:45:34 2012] fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Fri May 11 08:45:34 2012] Fit fullrun_mos2_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src22 appears to have run properly
[Fri May 11 08:47:01 2012] Source 25 is offset by -4.194609 and 8.221468 pixels which is larger than
2 X fitted extent = 0.741752 x 0.741752, not incorporating fit results
[Fri May 11 08:47:01 2012] Spatial fit model total counts = 3753.410000, observed total counts = 3738.000000
[Fri May 11 08:47:01 2012] Offset between fit and detection position for source 25 = 7.192196 pixels
[Fri May 11 08:47:01 2012] 3741.434000 total counts/ 3023.420000 bgd. counts: snr = 13.058211
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 7.192196 pixels
  Position = (303.9, 299.4) = 0 42 50.37 41 15 22.7
  Extent = 13.2 (13.2-26.4)", rotation angle = 0
  Source counts = 718.0 +/- 61.2
  Background counts = 3023.4
  Rate = 0.03 +/- 0.003
[Fri May 11 08:47:02 2012] Vigneting correction estimate = 1.000000
[Fri May 11 08:47:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 11 08:47:02 2012] Assessing source extent using major axis lower bound
[Fri May 11 08:47:02 2012] Source does appear to be extended
[Fri May 11 08:47:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 11 08:47:02 2012] Source is confused with source 1
[Sat May 12 09:14:38 2012] XMMSAS src. selection expression = ellipse(26390.762000, 25996.222000, 792.672023, 792.672023, 0.000000, X, Y)
[Sat May 12 09:14:38 2012] Writing source region out to fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src25_src.reg
[Sat May 12 09:14:38 2012] Extracting stamp from image fullrun_mos2_xmm0505720401_pi300-10000_cl_sm2.00.img.gz, (258, 254) - (349, 345)
[Sat May 12 09:14:38 2012] XMMSAS bgd. selection expression = annulus(26390.762000, 25996.222000, 1321.120038, 2642.240076, X, Y) && !ellipse(28879.408000, 26306.964000, 1206.928035, 1206.928035, 0.000000, X, Y) && !ellipse(26791.526200, 26033.006640, 516.259215, 516.259215, 0.000000, X, Y) && !ellipse(27741.665400, 26900.450800, 924.416027, 401.585612, 45.559000, X, Y) && !ellipse(23463.514779, 26073.633108, 494.701919, 354.648880, 68.626725, X, Y) && !ellipse(25311.466000, 26825.742600, 381.641611, 353.151210, 207.586000, X, Y) && !ellipse(27073.660400, 27284.633200, 476.670414, 476.670414, 0.000000, X, Y) && !ellipse(24206.443146, 26897.044525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28146.185364, 25257.529419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28816.898840, 24920.444200, 326.355209, 326.355209, 0.000000, X, Y) && !ellipse(29555.716000, 26932.594000, 1316.336038, 1316.336038, 0.000000, X, Y) && !ellipse(25860.526000, 27709.934000, 223.288006, 223.288006, 0.000000, X, Y) && !ellipse(24564.941132, 26145.689819, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28153.136230, 27863.631836, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27545.315060, 28747.774986, 430.532812, 430.532812, 0.000000, X, Y) && !ellipse(28523.122000, 23689.340200, 296.680809, 296.680809, 0.000000, X, Y) && !ellipse(28574.534515, 25620.434753, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26243.689606, 27354.644135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25395.667938, 28214.732910, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27400.005310, 24510.101501, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26634.470000, 28190.576000, 2420.848070, 2420.848070, 0.000000, X, Y) && !ellipse(29850.342468, 27690.969971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26402.346000, 29037.592000, 2420.848070, 1215.072035, 323.851000, X, Y) && !ellipse(26179.770000, 29349.644000, 1210.424035, 1210.424035, 0.000000, X, Y) && !ellipse(27029.844000, 28307.566000, 1229.864035, 1229.864035, 0.000000, X, Y)
[Sat May 12 09:14:38 2012] Writing fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src25.gif
[Sat May 12 09:46:30 2012] Mean detx,y = (710.82, -1140.42) 
[Sat May 12 09:46:32 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 12 09:46:46 2012] Binned source spectrum to 10 counts/bin
[Sat May 12 09:46:47 2012] Setting source spectrum file to fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Sat May 12 09:46:47 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Sat May 12 14:51:47 2012] Updating aperture counts using extracted products
[Sat May 12 14:51:47 2012] Error reading totcts from fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Sat May 12 14:51:52 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 12 14:51:52 2012] Using photon index=1.80, rate=0.0321, arf fullrun_mos2_xmm0505720401_pi300-10000_pass1_cl_src25.arf
[Sat May 12 14:51:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 12 14:51:52 2012] Updating source flux to 3.4e-13
[Sat May 12 15:00:14 2012] Flag b found in src. 25 procflags, skipping spectral fitting
[Sat May 12 15:00:14 2012] Flag c found in src. 25 procflags, skipping spectral fitting