[Tue May  8 11:38:39 2012] Detection parameters:
  Position = (403.5, 236.8) = 0 42 11.99 41 10 49.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 165.5 +/- 16.8
  Background counts = 15.1
  Rate = 0.01 +/- 0.001

[Tue May  8 11:38:41 2012] Off-axis axis estimate = 8.83'
[Wed May  9 03:34:29 2012] Using EEF radius (= 10.84 ")to estimate initial spatial extent for simple fitting
[Wed May  9 03:34:29 2012] Initial guess for spatial extent in simple fitting = 10.84"
[Wed May  9 03:34:29 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.005
[Wed May  9 03:34:29 2012] Giving source the simple spatial ID 48 for pass 0, mean size = 10.84"
[Wed May  9 14:14:24 2012] fullrun_mos1_xmm0505720401_pi300-10000_cl_pass0_src48.ximg exists
[Wed May  9 14:14:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720401_pi300-10000_cl_pass0_src48.csv
[Wed May  9 14:14:24 2012] fullrun_mos1_xmm0505720401_pi300-10000_cl_pass0_src48_1.ximg exists
[Wed May  9 14:14:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720401_pi300-10000_cl_pass0_src48.csv
[Wed May  9 14:14:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505720401_pi300-10000_cl_pass0_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505720401_pi300-10000_cl_pass0_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  9 14:14:26 2012] fullrun_mos1_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src48.ximg exists
[Wed May  9 14:14:26 2012] fullrun_mos1_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src48_1.ximg exists
[Wed May  9 14:14:26 2012] Fit fullrun_mos1_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src48 appears to have run properly
[Thu May 10 00:43:09 2012] Warning: source 48 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 95 at 12.937510 pixels away
[Thu May 10 00:43:10 2012] Source 95 is offset by -2.724699 and -1.388806 pixels which is larger than
2 X fitted extent = 1.297513 x 10.380138, not incorporating fit results
[Thu May 10 00:43:10 2012] Vigneting correction estimate = 1.000000
[Thu May 10 00:43:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 10 00:43:10 2012] Assessing source extent using major
[Thu May 10 00:43:10 2012] Source does appear to be extended
[Thu May 10 00:43:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 10 17:41:46 2012] Using EEF radius (= 10.84 ")to estimate initial spatial extent for simple fitting
[Thu May 10 17:41:46 2012] Initial guess for spatial extent in simple fitting = 10.84"
[Thu May 10 17:41:46 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.005
[Thu May 10 17:41:46 2012] Giving source the simple spatial ID 46 for pass 1, mean size = 10.84"
[Fri May 11 00:01:19 2012] fullrun_mos1_xmm0505720401_pi300-10000_cl_pass1_src46.ximg exists
[Fri May 11 00:01:19 2012] fullrun_mos1_xmm0505720401_pi300-10000_cl_pass1_src46_1.ximg exists
[Fri May 11 00:01:19 2012] Fit fullrun_mos1_xmm0505720401_pi300-10000_cl_pass1_src46 appears to have run properly
[Fri May 11 00:01:21 2012] fullrun_mos1_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src46.ximg exists
[Fri May 11 00:01:21 2012] fullrun_mos1_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src46_1.ximg exists
[Fri May 11 00:01:21 2012] Fit fullrun_mos1_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src46 appears to have run properly
[Fri May 11 08:46:34 2012] Warning, spatial fit 46 centroid is now closest to src. 26
[Fri May 11 08:46:34 2012] Vigneting correction estimate = 1.000000
[Fri May 11 08:46:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 11 08:46:34 2012] Assessing source extent using major
[Fri May 11 08:46:34 2012] Source does appear to be extended
[Fri May 11 08:46:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 12 05:18:12 2012] XMMSAS src. selection expression = ellipse(35058.307220, 20554.103867, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 12 05:18:12 2012] Writing source region out to fullrun_mos1_xmm0505720401_pi300-10000_pass1_cl_src95_src.reg
[Sat May 12 05:18:12 2012] Extracting stamp from image fullrun_mos1_xmm0505720401_pi300-10000_cl_sm2.00.img.gz, (366, 199) - (441, 274)
[Sat May 12 05:18:12 2012] XMMSAS bgd. selection expression = annulus(35058.307220, 20554.103867, 1087.500000, 2175.000000, X, Y) && !ellipse(33567.487030, 22419.135834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34304.509888, 22658.903564, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 12 05:18:12 2012] Writing fullrun_mos1_xmm0505720401_pi300-10000_pass1_cl_src95.gif
[Sat May 12 05:50:44 2012] Mean detx,y = (-1868.98, 9210.76) 
[Sat May 12 05:50:47 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 12 05:51:02 2012] Binned source spectrum to 10 counts/bin
[Sat May 12 05:51:02 2012] Setting source spectrum file to fullrun_mos1_xmm0505720401_pi300-10000_pass1_cl_src95_src_b10.pi.gz
[Sat May 12 05:51:02 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505720401_pi300-10000_pass1_cl_src95_bgd.pi.gz
[Sat May 12 08:37:43 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat May 12 08:37:43 2012] rmf not generated due to insufficient counts
[Sat May 12 14:51:39 2012] Updating aperture counts using extracted products
[Sat May 12 14:51:39 2012] Error reading totcts from fullrun_mos1_xmm0505720401_pi300-10000_pass1_cl_src95_src_b10.pi.gz
[Sat May 12 14:51:43 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 12 14:51:43 2012] Using photon index=1.80, rate=0.0113, arf fullrun_mos1_xmm0505720401_pi300-10000_pass1_cl_src95.arf
[Sat May 12 14:51:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 12 14:51:43 2012] Updating source flux to 1.7e-13
[Sat May 12 14:52:00 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting