[Tue May  8 11:38:39 2012] Detection parameters:
  Position = (255.8, 263.3) = 0 43 8.91 41 12 51.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 163.2 +/- 16.6
  Background counts = 19.5
  Rate = 0.01 +/- 0.001

[Tue May  8 11:38:41 2012] Off-axis axis estimate = 4.01'
[Wed May  9 03:34:29 2012] Using EEF radius (= 8.43 ")to estimate initial spatial extent for simple fitting
[Wed May  9 03:34:29 2012] Initial guess for spatial extent in simple fitting = 8.43"
[Wed May  9 03:34:29 2012] source mask rpix=1.9, npix_max = 23, mask sum = 22, frac = 0.925
[Wed May  9 03:34:29 2012] Giving source the simple spatial ID 45 for pass 0, mean size = 8.43"
[Wed May  9 14:14:24 2012] fullrun_mos1_xmm0505720401_pi300-10000_cl_pass0_src45.ximg exists
[Wed May  9 14:14:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720401_pi300-10000_cl_pass0_src45.csv
[Wed May  9 14:14:24 2012] fullrun_mos1_xmm0505720401_pi300-10000_cl_pass0_src45_1.ximg exists
[Wed May  9 14:14:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720401_pi300-10000_cl_pass0_src45.csv
[Wed May  9 14:14:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505720401_pi300-10000_cl_pass0_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505720401_pi300-10000_cl_pass0_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  9 14:14:25 2012] fullrun_mos1_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src45.ximg exists
[Wed May  9 14:14:25 2012] fullrun_mos1_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src45_1.ximg exists
[Wed May  9 14:14:26 2012] Fit fullrun_mos1_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src45 appears to have run properly
[Thu May 10 00:43:09 2012] Spatial fit model total counts = 286.639000, observed total counts = 273.000000
[Thu May 10 00:43:09 2012] Offset between fit and detection position for source 91 = 0.820901 pixels
[Thu May 10 00:43:09 2012] 289.931000 total counts/ 199.399000 bgd. counts: snr = 6.411219
Spatial fit parameters:
  Offset between fit and detection position for source 91 = 0.820901 pixels
  Position = (255.8, 264.1) = 0 43 8.93 41 12 49.3
  Extent = 3.9 (3.1-5.3)", rotation angle = 0
  Source counts = 90.5 +/- 17.0
  Background counts = 199.4
  Rate = 0.004 +/- 0.0008
[Thu May 10 00:43:10 2012] Vigneting correction estimate = 1.000000
[Thu May 10 00:43:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 10 00:43:10 2012] Assessing source extent using major axis lower bound
[Thu May 10 00:43:10 2012] Source does appear to be extended
[Thu May 10 00:43:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 10 17:41:46 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 10 17:41:46 2012] Initial guess for spatial extent in simple fitting = 3.88"
[Thu May 10 17:41:46 2012] source mask rpix=0.9, npix_max = 7, mask sum = 7, frac = 0.902
[Thu May 10 17:41:46 2012] Giving source the simple spatial ID 43 for pass 1, mean size = 3.88"
[Fri May 11 00:01:19 2012] fullrun_mos1_xmm0505720401_pi300-10000_cl_pass1_src43.ximg exists
[Fri May 11 00:01:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720401_pi300-10000_cl_pass1_src43.csv
[Fri May 11 00:01:19 2012] fullrun_mos1_xmm0505720401_pi300-10000_cl_pass1_src43_1.ximg exists
[Fri May 11 00:01:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720401_pi300-10000_cl_pass1_src43.csv
[Fri May 11 00:01:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505720401_pi300-10000_cl_pass1_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505720401_pi300-10000_cl_pass1_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 11 00:01:21 2012] fullrun_mos1_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src43.ximg exists
[Fri May 11 00:01:21 2012] fullrun_mos1_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src43_1.ximg exists
[Fri May 11 00:01:21 2012] Fit fullrun_mos1_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src43 appears to have run properly
[Fri May 11 08:46:34 2012] Spatial fit model total counts = 289.761000, observed total counts = 281.000000
[Fri May 11 08:46:34 2012] Offset between fit and detection position for source 91 = 0.018199 pixels
[Fri May 11 08:46:34 2012] 293.782400 total counts/ 199.383000 bgd. counts: snr = 6.685366
Spatial fit parameters:
  Offset between fit and detection position for source 91 = 0.018199 pixels
  Position = (255.8, 264.1) = 0 43 8.92 41 12 49.3
  Extent = 4.1 (3.2-5.5)", rotation angle = 0
  Source counts = 94.4 +/- 17.1
  Background counts = 199.4
  Rate = 0.004 +/- 0.0008
[Fri May 11 08:46:34 2012] Vigneting correction estimate = 1.000000
[Fri May 11 08:46:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 11 08:46:34 2012] Assessing source extent using major axis lower bound
[Fri May 11 08:46:34 2012] Source does appear to be extended
[Fri May 11 08:46:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 12 05:18:12 2012] XMMSAS src. selection expression = ellipse(22204.923640, 22928.592000, 244.773607, 244.773607, 0.000000, X, Y)
[Sat May 12 05:18:12 2012] Writing source region out to fullrun_mos1_xmm0505720401_pi300-10000_pass1_cl_src91_src.reg
[Sat May 12 05:18:12 2012] Extracting stamp from image fullrun_mos1_xmm0505720401_pi300-10000_cl_sm2.00.img.gz, (242, 250) - (270, 278)
[Sat May 12 05:18:12 2012] XMMSAS bgd. selection expression = annulus(22204.923640, 22928.592000, 407.956012, 815.912023, X, Y)
[Sat May 12 05:18:12 2012] Writing fullrun_mos1_xmm0505720401_pi300-10000_pass1_cl_src91.gif
[Sat May 12 05:49:36 2012] Mean detx,y = (-5793.23, -3259.69) 
[Sat May 12 05:49:39 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 12 05:49:54 2012] Binned source spectrum to 10 counts/bin
[Sat May 12 05:49:55 2012] Setting source spectrum file to fullrun_mos1_xmm0505720401_pi300-10000_pass1_cl_src91_src_b10.pi.gz
[Sat May 12 05:49:55 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505720401_pi300-10000_pass1_cl_src91_bgd.pi.gz
[Sat May 12 08:37:19 2012] Not generating rmf since there are only 94 counts
[Sat May 12 08:37:19 2012] rmf not generated due to insufficient counts
[Sat May 12 14:51:38 2012] Updating aperture counts using extracted products
[Sat May 12 14:51:39 2012] Error reading totcts from fullrun_mos1_xmm0505720401_pi300-10000_pass1_cl_src91_src_b10.pi.gz
[Sat May 12 14:51:43 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 12 14:51:43 2012] Using photon index=1.80, rate=0.00421, arf fullrun_mos1_xmm0505720401_pi300-10000_pass1_cl_src91.arf
[Sat May 12 14:51:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 12 14:51:43 2012] Updating source flux to 8.4e-14
[Sat May 12 14:52:00 2012] Source 91 has fewer than 100.000000 counts, skipping spectral fitting