[Tue May  8 11:38:37 2012] Detection parameters:
  Position = (282.7, 301.1) = 0 42 58.55 41 15 31.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 221.4 +/- 21.3
  Background counts = 37.9
  Rate = 0.01 +/- 0.001

[Tue May  8 11:38:41 2012] Off-axis axis estimate = 1.16'
[Wed May  9 03:34:29 2012] Using EEF radius (= 7.01 ")to estimate initial spatial extent for simple fitting
[Wed May  9 03:34:29 2012] Initial guess for spatial extent in simple fitting = 7.01"
[Wed May  9 03:34:29 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.898
[Wed May  9 03:34:29 2012] Giving source the simple spatial ID 47 for pass 0, mean size = 7.01"
[Wed May  9 14:14:24 2012] fullrun_mos1_xmm0505720401_pi300-10000_cl_pass0_src47.ximg exists
[Wed May  9 14:14:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720401_pi300-10000_cl_pass0_src47.csv
[Wed May  9 14:14:24 2012] fullrun_mos1_xmm0505720401_pi300-10000_cl_pass0_src47_1.ximg exists
[Wed May  9 14:14:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720401_pi300-10000_cl_pass0_src47.csv
[Wed May  9 14:14:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505720401_pi300-10000_cl_pass0_src47_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505720401_pi300-10000_cl_pass0_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  9 14:14:26 2012] fullrun_mos1_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src47.ximg exists
[Wed May  9 14:14:26 2012] fullrun_mos1_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src47_1.ximg exists
[Wed May  9 14:14:26 2012] Fit fullrun_mos1_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src47 appears to have run properly
[Thu May 10 00:43:09 2012] Source 80 is offset by 3.981375 and -7.309485 pixels which is larger than
2 X fitted extent = 1.750409 x 1.750409, not incorporating fit results
[Thu May 10 00:43:10 2012] Vigneting correction estimate = 1.000000
[Thu May 10 00:43:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 10 00:43:10 2012] Assessing source extent using major
[Thu May 10 00:43:10 2012] Source does appear to be extended
[Thu May 10 00:43:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 10 17:41:46 2012] Using EEF radius (= 7.01 ")to estimate initial spatial extent for simple fitting
[Thu May 10 17:41:46 2012] Initial guess for spatial extent in simple fitting = 7.01"
[Thu May 10 17:41:46 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.898
[Thu May 10 17:41:46 2012] Giving source the simple spatial ID 45 for pass 1, mean size = 7.01"
[Fri May 11 00:01:19 2012] fullrun_mos1_xmm0505720401_pi300-10000_cl_pass1_src45.ximg exists
[Fri May 11 00:01:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720401_pi300-10000_cl_pass1_src45.csv
[Fri May 11 00:01:19 2012] fullrun_mos1_xmm0505720401_pi300-10000_cl_pass1_src45_1.ximg exists
[Fri May 11 00:01:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720401_pi300-10000_cl_pass1_src45.csv
[Fri May 11 00:01:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505720401_pi300-10000_cl_pass1_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505720401_pi300-10000_cl_pass1_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 11 00:01:21 2012] fullrun_mos1_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src45.ximg exists
[Fri May 11 00:01:21 2012] fullrun_mos1_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src45_1.ximg exists
[Fri May 11 00:01:21 2012] Fit fullrun_mos1_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src45 appears to have run properly
[Fri May 11 08:46:34 2012] Source 80 is offset by 3.981973 and -7.309485 pixels which is larger than
2 X fitted extent = 1.736166 x 1.736166, not incorporating fit results
[Fri May 11 08:46:34 2012] Source 80 is offset by 8.137306 and -0.308083 pixels which is larger than
2 X fitted extent = 0.944713 x 0.944713, not incorporating fit results
[Fri May 11 08:46:34 2012] Vigneting correction estimate = 1.000000
[Fri May 11 08:46:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 11 08:46:34 2012] Assessing source extent using major
[Fri May 11 08:46:34 2012] Source does appear to be extended
[Fri May 11 08:46:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 12 05:18:12 2012] XMMSAS src. selection expression = ellipse(24545.965637, 26150.176819, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 12 05:18:12 2012] Writing source region out to fullrun_mos1_xmm0505720401_pi300-10000_pass1_cl_src80_src.reg
[Sat May 12 05:18:12 2012] Extracting stamp from image fullrun_mos1_xmm0505720401_pi300-10000_cl_sm2.00.img.gz, (245, 264) - (320, 339)
[Sat May 12 05:18:12 2012] XMMSAS bgd. selection expression = annulus(24545.965637, 26150.176819, 1087.500000, 2175.000000, X, Y) && !ellipse(26787.310400, 26046.059600, 534.476015, 534.476015, 0.000000, X, Y) && !ellipse(23466.059200, 26082.559800, 439.484013, 439.484013, 0.000000, X, Y) && !ellipse(25308.447409, 26835.904604, 391.746071, 381.995593, 329.673186, X, Y) && !ellipse(27070.886600, 27288.007800, 554.658416, 357.728010, 80.607170, X, Y) && !ellipse(25860.210449, 26385.133636, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24206.470600, 26876.905200, 352.280010, 352.280010, 0.000000, X, Y) && !ellipse(25877.043896, 27743.700200, 335.604010, 335.604010, 0.000000, X, Y) && !ellipse(27666.612000, 27958.812000, 1231.376035, 1231.376035, 0.000000, X, Y) && !ellipse(27395.816000, 28610.544000, 826.088024, 826.088024, 0.000000, X, Y) && !ellipse(23238.520355, 26809.784332, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 12 05:18:12 2012] Writing fullrun_mos1_xmm0505720401_pi300-10000_pass1_cl_src80.gif
[Sat May 12 05:50:25 2012] Mean detx,y = (-1777.76, -2714.54) 
[Sat May 12 05:50:27 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 12 05:50:38 2012] Binned source spectrum to 10 counts/bin
[Sat May 12 05:50:38 2012] Setting source spectrum file to fullrun_mos1_xmm0505720401_pi300-10000_pass1_cl_src80_src_b10.pi.gz
[Sat May 12 05:50:38 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505720401_pi300-10000_pass1_cl_src80_bgd.pi.gz
[Sat May 12 08:37:34 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat May 12 08:37:34 2012] rmf not generated due to insufficient counts
[Sat May 12 14:51:39 2012] Updating aperture counts using extracted products
[Sat May 12 14:51:39 2012] Error reading totcts from fullrun_mos1_xmm0505720401_pi300-10000_pass1_cl_src80_src_b10.pi.gz
[Sat May 12 14:51:43 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 12 14:51:43 2012] Using photon index=1.80, rate=0.0113, arf fullrun_mos1_xmm0505720401_pi300-10000_pass1_cl_src80.arf
[Sat May 12 14:51:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 12 14:51:43 2012] Updating source flux to 1.2e-13
[Sat May 12 14:52:00 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting