[Tue May  8 11:38:37 2012] Detection parameters:
  Position = (347.4, 305.1) = 0 42 33.60 41 15 49.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 69.6 +/- 15.8
  Background counts = 38.6
  Rate = 0.003 +/- 0.0007

[Tue May  8 11:38:41 2012] Off-axis axis estimate = 3.58'
[Wed May  9 03:34:29 2012] Using EEF radius (= 8.22 ")to estimate initial spatial extent for simple fitting
[Wed May  9 03:34:29 2012] Initial guess for spatial extent in simple fitting = 8.22"
[Wed May  9 03:34:29 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.095
[Wed May  9 03:34:29 2012] Giving source the simple spatial ID 81 for pass 0, mean size = 8.22"
[Wed May  9 14:14:24 2012] fullrun_mos1_xmm0505720401_pi300-10000_cl_pass0_src81.ximg exists
[Wed May  9 14:14:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720401_pi300-10000_cl_pass0_src81.csv
[Wed May  9 14:14:24 2012] fullrun_mos1_xmm0505720401_pi300-10000_cl_pass0_src81_1.ximg exists
[Wed May  9 14:14:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720401_pi300-10000_cl_pass0_src81.csv
[Wed May  9 14:14:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505720401_pi300-10000_cl_pass0_src81_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505720401_pi300-10000_cl_pass0_src81.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  9 14:14:26 2012] fullrun_mos1_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src81.ximg exists
[Wed May  9 14:14:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src81.csv
[Wed May  9 14:14:26 2012] fullrun_mos1_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src81_1.ximg exists
[Wed May  9 14:14:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src81.csv
[Wed May  9 14:14:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src81_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src81.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 00:43:09 2012] Source 79 is offset by -7.109129 and 0.609556 pixels which is larger than
2 X fitted extent = 1.060253 x 1.060253, not incorporating fit results
[Thu May 10 00:43:10 2012] Warning, spatial fit 81 centroid is now closest to src. 42
[Thu May 10 00:43:10 2012] Vigneting correction estimate = 1.000000
[Thu May 10 00:43:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 10 00:43:10 2012] Assessing source extent using major
[Thu May 10 00:43:10 2012] Source does appear to be extended
[Thu May 10 00:43:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 10 00:43:10 2012] Source is confused with source 42
[Thu May 10 17:41:46 2012] Using EEF radius (= 8.22 ")to estimate initial spatial extent for simple fitting
[Thu May 10 17:41:46 2012] Initial guess for spatial extent in simple fitting = 8.22"
[Thu May 10 17:41:46 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.095
[Thu May 10 17:41:46 2012] Giving source the simple spatial ID 72 for pass 1, mean size = 8.22"
[Fri May 11 00:01:20 2012] fullrun_mos1_xmm0505720401_pi300-10000_cl_pass1_src72.ximg exists
[Fri May 11 00:01:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720401_pi300-10000_cl_pass1_src72.csv
[Fri May 11 00:01:20 2012] fullrun_mos1_xmm0505720401_pi300-10000_cl_pass1_src72_1.ximg exists
[Fri May 11 00:01:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720401_pi300-10000_cl_pass1_src72.csv
[Fri May 11 00:01:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505720401_pi300-10000_cl_pass1_src72_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505720401_pi300-10000_cl_pass1_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 11 00:01:22 2012] fullrun_mos1_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src72.ximg exists
[Fri May 11 00:01:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src72.csv
[Fri May 11 00:01:22 2012] fullrun_mos1_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src72_1.ximg exists
[Fri May 11 00:01:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src72.csv
[Fri May 11 00:01:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src72_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 11 08:46:34 2012] Source 79 is offset by 7.930595 and 2.087096 pixels which is larger than
2 X fitted extent = 6.680322 x 6.680322, not incorporating fit results
[Fri May 11 08:46:34 2012] Vigneting correction estimate = 1.000000
[Fri May 11 08:46:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 11 08:46:34 2012] Assessing source extent using major
[Fri May 11 08:46:34 2012] Source does appear to be extended
[Fri May 11 08:46:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 12 05:18:13 2012] XMMSAS src. selection expression = ellipse(30172.941803, 26497.595367, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 12 05:18:13 2012] Writing source region out to fullrun_mos1_xmm0505720401_pi300-10000_pass1_cl_src79_src.reg
[Sat May 12 05:18:13 2012] Extracting stamp from image fullrun_mos1_xmm0505720401_pi300-10000_cl_sm2.00.img.gz, (310, 268) - (385, 343)
[Sat May 12 05:18:13 2012] XMMSAS bgd. selection expression = annulus(30172.941803, 26497.595367, 1087.500000, 2175.000000, X, Y) && !ellipse(28999.616540, 26832.840600, 406.641612, 406.641612, 0.000000, X, Y) && !ellipse(27707.104000, 26929.502000, 441.854413, 441.854413, 0.000000, X, Y) && !ellipse(30669.796000, 27246.521600, 344.846410, 344.846410, 0.000000, X, Y) && !ellipse(32538.408800, 26286.048200, 315.171209, 315.171209, 0.000000, X, Y) && !ellipse(28088.348206, 26580.198639, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28174.734000, 25236.147400, 457.564813, 457.564813, 0.000000, X, Y) && !ellipse(30061.868652, 27131.435822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32473.322906, 24496.823700, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28509.119904, 23710.733246, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27666.612000, 27958.812000, 1231.376035, 1231.376035, 0.000000, X, Y) && !ellipse(32023.377747, 23941.880096, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27395.816000, 28610.544000, 826.088024, 826.088024, 0.000000, X, Y) && !ellipse(29564.958679, 27985.348999, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28946.363403, 28406.670288, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 12 05:18:13 2012] Writing fullrun_mos1_xmm0505720401_pi300-10000_pass1_cl_src79.gif
[Sat May 12 06:04:35 2012] Mean detx,y = (1146.41, 2027.51) 
[Sat May 12 06:04:37 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 12 06:04:50 2012] Binned source spectrum to 10 counts/bin
[Sat May 12 06:04:50 2012] Setting source spectrum file to fullrun_mos1_xmm0505720401_pi300-10000_pass1_cl_src79_src_b10.pi.gz
[Sat May 12 06:04:50 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505720401_pi300-10000_pass1_cl_src79_bgd.pi.gz
[Sat May 12 09:13:16 2012] Not generating rmf since there are only 69 counts
[Sat May 12 09:13:16 2012] rmf not generated due to insufficient counts
[Sat May 12 14:51:41 2012] Updating aperture counts using extracted products
[Sat May 12 14:51:41 2012] Error reading totcts from fullrun_mos1_xmm0505720401_pi300-10000_pass1_cl_src79_src_b10.pi.gz
[Sat May 12 14:51:45 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 12 14:51:45 2012] Using photon index=1.80, rate=0.00321, arf fullrun_mos1_xmm0505720401_pi300-10000_pass1_cl_src79.arf
[Sat May 12 14:51:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 12 14:51:45 2012] Updating source flux to 3.3e-14
[Sat May 12 14:52:00 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting