[Tue May  8 11:38:36 2012] Detection parameters:
  Position = (316.2, 328.5) = 0 42 45.62 41 17 32.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 138.1 +/- 18.0
  Background counts = 38.4
  Rate = 0.007 +/- 0.0009

[Tue May  8 11:38:41 2012] Off-axis axis estimate = 2.54'
[Wed May  9 03:34:29 2012] Using EEF radius (= 7.70 ")to estimate initial spatial extent for simple fitting
[Wed May  9 03:34:29 2012] Initial guess for spatial extent in simple fitting = 7.70"
[Wed May  9 03:34:29 2012] source mask rpix=1.8, npix_max = 20, mask sum = 18, frac = 0.874
[Wed May  9 03:34:29 2012] Giving source the simple spatial ID 57 for pass 0, mean size = 7.70"
[Wed May  9 14:14:24 2012] fullrun_mos1_xmm0505720401_pi300-10000_cl_pass0_src57.ximg exists
[Wed May  9 14:14:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720401_pi300-10000_cl_pass0_src57.csv
[Wed May  9 14:14:24 2012] fullrun_mos1_xmm0505720401_pi300-10000_cl_pass0_src57_1.ximg exists
[Wed May  9 14:14:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720401_pi300-10000_cl_pass0_src57.csv
[Wed May  9 14:14:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505720401_pi300-10000_cl_pass0_src57_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505720401_pi300-10000_cl_pass0_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  9 14:14:26 2012] fullrun_mos1_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src57.ximg exists
[Wed May  9 14:14:26 2012] fullrun_mos1_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src57_1.ximg exists
[Wed May  9 14:14:26 2012] Fit fullrun_mos1_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src57 appears to have run properly
[Thu May 10 00:43:09 2012] Spatial fit model total counts = 1092.090000, observed total counts = 1090.000000
[Thu May 10 00:43:09 2012] Offset between fit and detection position for source 71 = 7.027828 pixels
[Thu May 10 00:43:09 2012] 1076.671000 total counts/ 959.249000 bgd. counts: snr = 3.791262
Spatial fit parameters:
  Offset between fit and detection position for source 71 = 7.027828 pixels
  Position = (318.6, 321.9) = 0 42 44.71 41 17 0.8
  Extent = 15.4 (15.4-30.8)", rotation angle = 0
  Source counts = 117.4 +/- 32.8
  Background counts = 959.2
  Rate = 0.005 +/- 0.001
[Thu May 10 00:43:10 2012] Vigneting correction estimate = 1.000000
[Thu May 10 00:43:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 10 00:43:10 2012] Assessing source extent using major axis lower bound
[Thu May 10 00:43:10 2012] Source does appear to be extended
[Thu May 10 00:43:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 10 00:43:10 2012] Source is confused with source 8
[Thu May 10 17:41:46 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 10 17:41:46 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 10 17:41:46 2012] Initial guess for spatial extent in simple fitting = 15.39"
[Thu May 10 17:41:46 2012] source mask rpix=3.5, npix_max = 65, mask sum = 64, frac = 0.981
[Thu May 10 17:41:46 2012] Giving source the simple spatial ID 55 for pass 1, mean size = 15.39"
[Fri May 11 00:01:19 2012] fullrun_mos1_xmm0505720401_pi300-10000_cl_pass1_src55.ximg exists
[Fri May 11 00:01:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720401_pi300-10000_cl_pass1_src55.csv
[Fri May 11 00:01:19 2012] fullrun_mos1_xmm0505720401_pi300-10000_cl_pass1_src55_1.ximg exists
[Fri May 11 00:01:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720401_pi300-10000_cl_pass1_src55.csv
[Fri May 11 00:01:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505720401_pi300-10000_cl_pass1_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505720401_pi300-10000_cl_pass1_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 11 00:01:21 2012] fullrun_mos1_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src55.ximg exists
[Fri May 11 00:01:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src55.csv
[Fri May 11 00:01:21 2012] fullrun_mos1_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src55_1.ximg exists
[Fri May 11 00:01:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src55.csv
[Fri May 11 00:01:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 11 08:46:34 2012] Warning, spatial fit 55 centroid is now closest to src. 73
[Fri May 11 08:46:34 2012] Source 71 is offset by -8.701678 and 1.337632 pixels which is larger than
2 X fitted extent = 5.287127 x 5.287127, not incorporating fit results
[Fri May 11 08:46:34 2012] Vigneting correction estimate = 1.000000
[Fri May 11 08:46:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 11 08:46:34 2012] Assessing source extent using major axis lower bound
[Fri May 11 08:46:34 2012] Source does appear to be extended
[Fri May 11 08:46:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 12 05:18:12 2012] XMMSAS src. selection expression = ellipse(27666.612000, 27958.812000, 923.532027, 923.532027, 0.000000, X, Y)
[Sat May 12 05:18:12 2012] Writing source region out to fullrun_mos1_xmm0505720401_pi300-10000_pass1_cl_src71_src.reg
[Sat May 12 05:18:12 2012] Extracting stamp from image fullrun_mos1_xmm0505720401_pi300-10000_cl_sm2.00.img.gz, (265, 269) - (372, 375)
[Sat May 12 05:18:12 2012] XMMSAS bgd. selection expression = annulus(27666.612000, 27958.812000, 1539.220044, 3078.440089, X, Y) && !ellipse(28999.616540, 26832.840600, 406.641612, 406.641612, 0.000000, X, Y) && !ellipse(26787.310400, 26046.059600, 534.476015, 534.476015, 0.000000, X, Y) && !ellipse(27707.104000, 26929.502000, 441.854413, 441.854413, 0.000000, X, Y) && !ellipse(25308.447409, 26835.904604, 391.746071, 381.995593, 329.673186, X, Y) && !ellipse(27070.886600, 27288.007800, 554.658416, 357.728010, 80.607170, X, Y) && !ellipse(25863.313780, 30248.708400, 399.208011, 399.208011, 0.000000, X, Y) && !ellipse(30669.796000, 27246.521600, 344.846410, 344.846410, 0.000000, X, Y) && !ellipse(28088.348206, 26580.198639, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25860.210449, 26385.133636, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24267.573400, 30753.131600, 396.699211, 396.699211, 0.000000, X, Y) && !ellipse(30647.788120, 31141.157600, 363.124810, 363.124810, 0.000000, X, Y) && !ellipse(28174.734000, 25236.147400, 457.564813, 457.564813, 0.000000, X, Y) && !ellipse(28630.585600, 30061.587800, 374.272011, 374.272011, 0.000000, X, Y) && !ellipse(30061.868652, 27131.435822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26619.106600, 29477.659600, 281.584808, 281.584808, 0.000000, X, Y) && !ellipse(25877.043896, 27743.700200, 335.604010, 335.604010, 0.000000, X, Y) && !ellipse(25231.592438, 29744.223602, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24545.965637, 26150.176819, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26558.548000, 28868.048000, 425.223212, 425.223212, 0.000000, X, Y) && !ellipse(27395.816000, 28610.544000, 826.088024, 826.088024, 0.000000, X, Y) && !ellipse(29564.958679, 27985.348999, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28946.363403, 28406.670288, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30172.941803, 26497.595367, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 12 05:18:12 2012] Writing fullrun_mos1_xmm0505720401_pi300-10000_pass1_cl_src71.gif
[Sat May 12 05:55:38 2012] Mean detx,y = (845.85, -679.97) 
[Sat May 12 05:55:41 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 12 05:56:01 2012] Binned source spectrum to 10 counts/bin
[Sat May 12 05:56:01 2012] Setting source spectrum file to fullrun_mos1_xmm0505720401_pi300-10000_pass1_cl_src71_src_b10.pi.gz
[Sat May 12 05:56:01 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505720401_pi300-10000_pass1_cl_src71_bgd.pi.gz
[Sat May 12 14:51:39 2012] Updating aperture counts using extracted products
[Sat May 12 14:51:39 2012] Error reading totcts from fullrun_mos1_xmm0505720401_pi300-10000_pass1_cl_src71_src_b10.pi.gz
[Sat May 12 14:51:44 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 12 14:51:44 2012] Using photon index=1.80, rate=0.00524, arf fullrun_mos1_xmm0505720401_pi300-10000_pass1_cl_src71.arf
[Sat May 12 14:51:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 12 14:51:44 2012] Updating source flux to 5e-14
[Sat May 12 14:52:00 2012] Flag b found in src. 71 procflags, skipping spectral fitting
[Sat May 12 14:52:00 2012] Flag c found in src. 71 procflags, skipping spectral fitting