[Tue May  8 11:38:36 2012] Detection parameters:
  Position = (409.3, 332.2) = 0 42 9.67 41 17 45.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 165.9 +/- 16.9
  Background counts = 16.4
  Rate = 0.01 +/- 0.001

[Tue May  8 11:38:41 2012] Off-axis axis estimate = 8.40'
[Wed May  9 03:34:29 2012] Using EEF radius (= 10.63 ")to estimate initial spatial extent for simple fitting
[Wed May  9 03:34:29 2012] Initial guess for spatial extent in simple fitting = 10.63"
[Wed May  9 03:34:29 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.038
[Wed May  9 03:34:29 2012] Giving source the simple spatial ID 52 for pass 0, mean size = 10.63"
[Wed May  9 14:14:24 2012] fullrun_mos1_xmm0505720401_pi300-10000_cl_pass0_src52.ximg exists
[Wed May  9 14:14:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720401_pi300-10000_cl_pass0_src52.csv
[Wed May  9 14:14:24 2012] fullrun_mos1_xmm0505720401_pi300-10000_cl_pass0_src52_1.ximg exists
[Wed May  9 14:14:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720401_pi300-10000_cl_pass0_src52.csv
[Wed May  9 14:14:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505720401_pi300-10000_cl_pass0_src52_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505720401_pi300-10000_cl_pass0_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  9 14:14:26 2012] fullrun_mos1_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src52.ximg exists
[Wed May  9 14:14:26 2012] fullrun_mos1_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src52_1.ximg exists
[Wed May  9 14:14:26 2012] Fit fullrun_mos1_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src52 appears to have run properly
[Thu May 10 00:43:09 2012] Warning, spatial fit 52 centroid is now closest to src. 10
[Thu May 10 00:43:10 2012] Vigneting correction estimate = 1.000000
[Thu May 10 00:43:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 10 00:43:10 2012] Assessing source extent using major
[Thu May 10 00:43:10 2012] Source does appear to be extended
[Thu May 10 00:43:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 10 17:41:46 2012] Using EEF radius (= 10.63 ")to estimate initial spatial extent for simple fitting
[Thu May 10 17:41:46 2012] Initial guess for spatial extent in simple fitting = 10.63"
[Thu May 10 17:41:46 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.038
[Thu May 10 17:41:46 2012] Giving source the simple spatial ID 50 for pass 1, mean size = 10.63"
[Fri May 11 00:01:19 2012] fullrun_mos1_xmm0505720401_pi300-10000_cl_pass1_src50.ximg exists
[Fri May 11 00:01:19 2012] fullrun_mos1_xmm0505720401_pi300-10000_cl_pass1_src50_1.ximg exists
[Fri May 11 00:01:19 2012] Fit fullrun_mos1_xmm0505720401_pi300-10000_cl_pass1_src50 appears to have run properly
[Fri May 11 00:01:21 2012] fullrun_mos1_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src50.ximg exists
[Fri May 11 00:01:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src50.csv
[Fri May 11 00:01:21 2012] fullrun_mos1_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src50_1.ximg exists
[Fri May 11 00:01:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src50.csv
[Fri May 11 00:01:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 11 08:46:34 2012] Warning: source 50 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 68 at 16.746811 pixels away
[Fri May 11 08:46:34 2012] Source 68 is offset by -2.036964 and 2.845268 pixels which is larger than
2 X fitted extent = 1.046331 x 1.046331, not incorporating fit results
[Fri May 11 08:46:34 2012] Vigneting correction estimate = 1.000000
[Fri May 11 08:46:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 11 08:46:34 2012] Assessing source extent using major
[Fri May 11 08:46:34 2012] Source does appear to be extended
[Fri May 11 08:46:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 12 05:18:12 2012] XMMSAS src. selection expression = ellipse(35563.530090, 28854.284332, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 12 05:18:12 2012] Writing source region out to fullrun_mos1_xmm0505720401_pi300-10000_pass1_cl_src68_src.reg
[Sat May 12 05:18:12 2012] Extracting stamp from image fullrun_mos1_xmm0505720401_pi300-10000_cl_sm2.00.img.gz, (372, 295) - (447, 370)
[Sat May 12 05:18:12 2012] XMMSAS bgd. selection expression = annulus(35563.530090, 28854.284332, 1087.500000, 2175.000000, X, Y) && !ellipse(34729.413800, 29892.319400, 426.556012, 340.035210, 58.207600, X, Y) && !ellipse(35957.994000, 29449.908000, 273.554408, 273.554408, 0.000000, X, Y) && !ellipse(34953.363800, 29132.059600, 388.083211, 275.331208, 249.926000, X, Y) && !ellipse(35010.214020, 27815.251892, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 12 05:18:12 2012] Writing fullrun_mos1_xmm0505720401_pi300-10000_pass1_cl_src68.gif
[Sat May 12 05:52:38 2012] Mean detx,y = (5810.64, 5670.94) 
[Sat May 12 05:52:40 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 12 05:53:18 2012] Binned source spectrum to 10 counts/bin
[Sat May 12 05:53:18 2012] Setting source spectrum file to fullrun_mos1_xmm0505720401_pi300-10000_pass1_cl_src68_src_b10.pi.gz
[Sat May 12 05:53:18 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505720401_pi300-10000_pass1_cl_src68_bgd.pi.gz
[Sat May 12 08:38:16 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat May 12 08:38:16 2012] rmf not generated due to insufficient counts
[Sat May 12 14:51:39 2012] Updating aperture counts using extracted products
[Sat May 12 14:51:39 2012] Error reading totcts from fullrun_mos1_xmm0505720401_pi300-10000_pass1_cl_src68_src_b10.pi.gz
[Sat May 12 14:51:44 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 12 14:51:44 2012] Using photon index=1.80, rate=0.0102, arf fullrun_mos1_xmm0505720401_pi300-10000_pass1_cl_src68.arf
[Sat May 12 14:51:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 12 14:51:44 2012] Updating source flux to 1.4e-13
[Sat May 12 14:52:00 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting