[Tue May  8 11:38:26 2012] Detection parameters:
  Position = (250.8, 292.7) = 0 43 10.85 41 14 53.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2380.1 +/- 59.1
  Background counts = 23.4
  Rate = 0.1 +/- 0.004

[Tue May  8 11:38:41 2012] Off-axis axis estimate = 3.48'
[Wed May  9 03:34:29 2012] Using EEF radius (= 8.17 ")to estimate initial spatial extent for simple fitting
[Wed May  9 03:34:29 2012] Initial guess for spatial extent in simple fitting = 8.17"
[Wed May  9 03:34:29 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.106
[Wed May  9 03:34:29 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 8.17"
[Wed May  9 14:14:23 2012] fullrun_mos1_xmm0505720401_pi300-10000_cl_pass0_src2.ximg exists
[Wed May  9 14:14:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720401_pi300-10000_cl_pass0_src2.csv
[Wed May  9 14:14:23 2012] fullrun_mos1_xmm0505720401_pi300-10000_cl_pass0_src2_1.ximg exists
[Wed May  9 14:14:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720401_pi300-10000_cl_pass0_src2.csv
[Wed May  9 14:14:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505720401_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505720401_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  9 14:14:25 2012] fullrun_mos1_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Wed May  9 14:14:25 2012] fullrun_mos1_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Wed May  9 14:14:25 2012] Fit fullrun_mos1_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Thu May 10 00:43:08 2012] Spatial fit model total counts = 2247.000000, observed total counts = 2247.000000
[Thu May 10 00:43:09 2012] Offset between fit and detection position for source 2 = 0.174539 pixels
[Thu May 10 00:43:09 2012] 2249.338000 total counts/ 571.338000 bgd. counts: snr = 70.201340
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.174539 pixels
  Position = (250.8, 292.6) = 0 43 10.86 41 14 53.0
  Extent = 5.3 (5.1-5.6)", rotation angle = 0
  Source counts = 1678.0 +/- 47.4
  Background counts = 571.3
  Rate = 0.07 +/- 0.002
[Thu May 10 00:43:10 2012] Vigneting correction estimate = 1.000000
[Thu May 10 00:43:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 10 00:43:10 2012] Assessing source extent using major axis lower bound
[Thu May 10 00:43:10 2012] Source does appear to be extended
[Thu May 10 00:43:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 10 17:41:46 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 10 17:41:46 2012] Initial guess for spatial extent in simple fitting = 5.34"
[Thu May 10 17:41:46 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.005
[Thu May 10 17:41:46 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 5.34"
[Fri May 11 00:01:19 2012] fullrun_mos1_xmm0505720401_pi300-10000_cl_pass1_src2.ximg exists
[Fri May 11 00:01:19 2012] fullrun_mos1_xmm0505720401_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri May 11 00:01:19 2012] Fit fullrun_mos1_xmm0505720401_pi300-10000_cl_pass1_src2 appears to have run properly
[Fri May 11 00:01:20 2012] fullrun_mos1_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri May 11 00:01:20 2012] fullrun_mos1_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri May 11 00:01:20 2012] Fit fullrun_mos1_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Fri May 11 08:46:34 2012] Spatial fit model total counts = 2245.000000, observed total counts = 2245.000000
[Fri May 11 08:46:34 2012] Offset between fit and detection position for source 2 = 0.010609 pixels
[Fri May 11 08:46:34 2012] 2254.277000 total counts/ 571.307000 bgd. counts: snr = 70.411177
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.010609 pixels
  Position = (250.8, 292.5) = 0 43 10.86 41 14 53.0
  Extent = 5.4 (5.2-5.6)", rotation angle = 0
  Source counts = 1683.0 +/- 47.5
  Background counts = 571.3
  Rate = 0.08 +/- 0.002
[Fri May 11 08:46:34 2012] Vigneting correction estimate = 1.000000
[Fri May 11 08:46:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 11 08:46:34 2012] Assessing source extent using major axis lower bound
[Fri May 11 08:46:34 2012] Source does appear to be extended
[Fri May 11 08:46:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 12 05:18:10 2012] Counts = 1682.970000, rescaling region sizes by 2.000000
[Sat May 12 05:18:10 2012] XMMSAS src. selection expression = ellipse(21770.823620, 25403.233200, 643.381219, 643.381219, 0.000000, X, Y)
[Sat May 12 05:18:10 2012] Writing source region out to fullrun_mos1_xmm0505720401_pi300-10000_pass1_cl_src2_src.reg
[Sat May 12 05:18:10 2012] Extracting stamp from image fullrun_mos1_xmm0505720401_pi300-10000_cl_sm2.00.img.gz, (214, 256) - (288, 330)
[Sat May 12 05:18:11 2012] XMMSAS bgd. selection expression = annulus(21770.823620, 25403.233200, 2144.604062, 4289.208123, X, Y) && !ellipse(19656.358810, 24117.465149, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23466.059200, 26082.559800, 439.484013, 439.484013, 0.000000, X, Y) && !ellipse(25308.447409, 26835.904604, 391.746071, 381.995593, 329.673186, X, Y) && !ellipse(25860.210449, 26385.133636, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24206.470600, 26876.905200, 352.280010, 352.280010, 0.000000, X, Y) && !ellipse(23311.349800, 29264.419200, 387.572011, 387.572011, 0.000000, X, Y) && !ellipse(24633.077148, 21030.972351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25877.043896, 27743.700200, 335.604010, 335.604010, 0.000000, X, Y) && !ellipse(22204.923640, 22928.592000, 326.364809, 326.364809, 0.000000, X, Y) && !ellipse(25231.592438, 29744.223602, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24545.965637, 26150.176819, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17848.326340, 29770.269440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16778.682739, 20578.652267, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19396.805801, 28991.095337, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23238.520355, 26809.784332, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 12 05:18:11 2012] Writing fullrun_mos1_xmm0505720401_pi300-10000_pass1_cl_src2.gif
[Sat May 12 05:19:02 2012] Mean detx,y = (-3790.31, -4788.54) 
[Sat May 12 05:19:04 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 12 05:20:32 2012] Binned source spectrum to 10 counts/bin
[Sat May 12 05:20:32 2012] Setting source spectrum file to fullrun_mos1_xmm0505720401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat May 12 05:20:32 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505720401_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat May 12 14:51:36 2012] Updating aperture counts using extracted products
[Sat May 12 14:51:36 2012] Error reading totcts from fullrun_mos1_xmm0505720401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat May 12 14:51:41 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 12 14:51:41 2012] Using photon index=1.80, rate=0.0751, arf fullrun_mos1_xmm0505720401_pi300-10000_pass1_cl_src2.arf
[Sat May 12 14:51:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 12 14:51:41 2012] Updating source flux to 1e-12