[Tue May  8 11:38:41 2012] Detection parameters:
  Position = (348.6, 135.2) = 0 42 33.20 41 3 28.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 112.9 +/- 14.0
  Background counts = 9.0
  Rate = 0.005 +/- 0.0006

[Tue May  8 11:38:41 2012] Off-axis axis estimate = 12.38'
[Wed May  9 03:34:29 2012] Using EEF radius (= 12.62 ")to estimate initial spatial extent for simple fitting
[Wed May  9 03:34:29 2012] Initial guess for spatial extent in simple fitting = 12.62"
[Wed May  9 03:34:29 2012] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.059
[Wed May  9 03:34:29 2012] Giving source the simple spatial ID 68 for pass 0, mean size = 12.62"
[Wed May  9 14:14:24 2012] fullrun_mos1_xmm0505720401_pi300-10000_cl_pass0_src68.ximg exists
[Wed May  9 14:14:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720401_pi300-10000_cl_pass0_src68.csv
[Wed May  9 14:14:24 2012] fullrun_mos1_xmm0505720401_pi300-10000_cl_pass0_src68_1.ximg exists
[Wed May  9 14:14:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720401_pi300-10000_cl_pass0_src68.csv
[Wed May  9 14:14:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505720401_pi300-10000_cl_pass0_src68_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505720401_pi300-10000_cl_pass0_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  9 14:14:26 2012] fullrun_mos1_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src68.ximg exists
[Wed May  9 14:14:26 2012] fullrun_mos1_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src68_1.ximg exists
[Wed May  9 14:14:26 2012] Fit fullrun_mos1_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src68 appears to have run properly
[Thu May 10 00:43:10 2012] Spatial fit model total counts = 247.571000, observed total counts = 248.000000
[Thu May 10 00:43:10 2012] Offset between fit and detection position for source 102 = 0.122598 pixels
[Thu May 10 00:43:10 2012] 252.320100 total counts/ 174.173000 bgd. counts: snr = 5.921373
Spatial fit parameters:
  Offset between fit and detection position for source 102 = 0.122598 pixels
  Position = (348.4, 135.1) = 0 42 33.25 41 3 28.2
  Extent = 6.9 (4.9-8.8)", rotation angle = 0
  Source counts = 78.1 +/- 15.9
  Background counts = 174.2
  Rate = 0.003 +/- 0.0007
[Thu May 10 00:43:10 2012] Vigneting correction estimate = 1.000000
[Thu May 10 00:43:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 10 00:43:10 2012] Assessing source extent using major axis lower bound
[Thu May 10 00:43:10 2012] Source does appear to be extended
[Thu May 10 00:43:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 10 17:41:46 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 10 17:41:46 2012] Initial guess for spatial extent in simple fitting = 6.92"
[Thu May 10 17:41:46 2012] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.145
[Thu May 10 17:41:46 2012] Giving source the simple spatial ID 64 for pass 1, mean size = 6.92"
[Fri May 11 00:01:20 2012] fullrun_mos1_xmm0505720401_pi300-10000_cl_pass1_src64.ximg exists
[Fri May 11 00:01:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720401_pi300-10000_cl_pass1_src64.csv
[Fri May 11 00:01:20 2012] fullrun_mos1_xmm0505720401_pi300-10000_cl_pass1_src64_1.ximg exists
[Fri May 11 00:01:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720401_pi300-10000_cl_pass1_src64.csv
[Fri May 11 00:01:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505720401_pi300-10000_cl_pass1_src64_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505720401_pi300-10000_cl_pass1_src64.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 11 00:01:22 2012] fullrun_mos1_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src64.ximg exists
[Fri May 11 00:01:22 2012] fullrun_mos1_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src64_1.ximg exists
[Fri May 11 00:01:22 2012] Fit fullrun_mos1_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src64 appears to have run properly
[Fri May 11 08:46:34 2012] Spatial fit model total counts = 215.955000, observed total counts = 215.000000
[Fri May 11 08:46:34 2012] Offset between fit and detection position for source 102 = 0.045669 pixels
[Fri May 11 08:46:34 2012] 220.200700 total counts/ 142.996000 bgd. counts: snr = 6.456272
Spatial fit parameters:
  Offset between fit and detection position for source 102 = 0.045669 pixels
  Position = (348.4, 135.1) = 0 42 33.26 41 3 28.3
  Extent = 6.8 (4.6-8.7)", rotation angle = 0
  Source counts = 77.2 +/- 14.8
  Background counts = 143.0
  Rate = 0.003 +/- 0.0007
[Fri May 11 08:46:34 2012] Vigneting correction estimate = 1.000000
[Fri May 11 08:46:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 11 08:46:34 2012] Assessing source extent using major axis lower bound
[Fri May 11 08:46:34 2012] Source does appear to be extended
[Fri May 11 08:46:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 12 05:18:13 2012] XMMSAS src. selection expression = ellipse(30262.734400, 11708.846400, 406.718412, 406.718412, 0.000000, X, Y)
[Sat May 12 05:18:13 2012] Writing source region out to fullrun_mos1_xmm0505720401_pi300-10000_pass1_cl_src102_src.reg
[Sat May 12 05:18:13 2012] Extracting stamp from image fullrun_mos1_xmm0505720401_pi300-10000_cl_sm2.00.img.gz, (325, 112) - (372, 159)
[Sat May 12 05:18:13 2012] XMMSAS bgd. selection expression = annulus(30262.734400, 11708.846400, 677.864020, 1355.728039, X, Y) && !ellipse(31210.444946, 13091.267868, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 12 05:18:13 2012] Writing fullrun_mos1_xmm0505720401_pi300-10000_pass1_cl_src102.gif
[Sat May 12 06:00:42 2012] Mean detx,y = (-11938.00, 9106.38) 
[Sat May 12 06:00:44 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 12 06:01:00 2012] Binned source spectrum to 10 counts/bin
[Sat May 12 06:01:00 2012] Setting source spectrum file to fullrun_mos1_xmm0505720401_pi300-10000_pass1_cl_src102_src_b10.pi.gz
[Sat May 12 06:01:00 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505720401_pi300-10000_pass1_cl_src102_bgd.pi.gz
[Sat May 12 09:11:44 2012] Not generating rmf since there are only 77 counts
[Sat May 12 09:11:44 2012] rmf not generated due to insufficient counts
[Sat May 12 14:51:40 2012] Updating aperture counts using extracted products
[Sat May 12 14:51:40 2012] Error reading totcts from fullrun_mos1_xmm0505720401_pi300-10000_pass1_cl_src102_src_b10.pi.gz
[Sat May 12 14:51:44 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 12 14:51:44 2012] Using photon index=1.80, rate=0.00345, arf fullrun_mos1_xmm0505720401_pi300-10000_pass1_cl_src102.arf
[Sat May 12 14:51:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 12 14:51:44 2012] Updating source flux to 9e-14
[Sat May 12 14:52:00 2012] Source 102 has fewer than 100.000000 counts, skipping spectral fitting