[Fri Apr  6 11:35:34 2012] Detection parameters:
  Position = (269.4, 229.9) = 0 43 2.99 41 10 14.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 397.6 +/- 26.9
  Background counts = 65.5
  Rate = 0.03 +/- 0.002

[Fri Apr  6 11:35:37 2012] Off-axis axis estimate = 5.40'
[Fri Apr  6 11:38:09 2012] Using EEF radius (= 9.13 ")to estimate initial spatial extent for simple fitting
[Fri Apr  6 11:38:09 2012] Initial guess for spatial extent in simple fitting = 9.13"
[Fri Apr  6 11:38:09 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.926
[Fri Apr  6 11:38:09 2012] Giving source the simple spatial ID 57 for pass 0, mean size = 9.13"
[Fri Apr  6 15:40:00 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_src57.ximg exists
[Fri Apr  6 15:40:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_src57.csv
[Fri Apr  6 15:40:00 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_src57_1.ximg exists
[Fri Apr  6 15:40:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_src57.csv
[Fri Apr  6 15:40:00 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_src57_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Apr  6 15:40:01 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src57.ximg exists
[Fri Apr  6 15:40:01 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src57_1.ximg exists
[Fri Apr  6 15:40:01 2012] Fit fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src57 appears to have run properly
[Fri Apr  6 20:26:37 2012] Warning: source 57 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 61 at 12.945964 pixels away
[Fri Apr  6 20:26:37 2012] Vigneting correction estimate = 1.000000
[Fri Apr  6 20:26:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Apr  6 20:26:37 2012] Assessing source extent using major
[Fri Apr  6 20:26:37 2012] Source does appear to be extended
[Fri Apr  6 20:26:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Apr  6 20:27:23 2012] Using EEF radius (= 9.13 ")to estimate initial spatial extent for simple fitting
[Fri Apr  6 20:27:23 2012] Initial guess for spatial extent in simple fitting = 9.13"
[Fri Apr  6 20:27:23 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.926
[Fri Apr  6 20:27:23 2012] Giving source the simple spatial ID 55 for pass 1, mean size = 9.13"
[Fri Apr  6 23:19:28 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_src55.ximg exists
[Fri Apr  6 23:19:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_src55.csv
[Fri Apr  6 23:19:28 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_src55_1.ximg exists
[Fri Apr  6 23:19:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_src55.csv
[Fri Apr  6 23:19:28 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_src55_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Apr  6 23:19:29 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src55.ximg exists
[Fri Apr  6 23:19:29 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src55_1.ximg exists
[Fri Apr  6 23:19:29 2012] Fit fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src55 appears to have run properly
[Sat Apr  7 03:24:48 2012] Spatial fit model total counts = 940.955000, observed total counts = 936.000000
[Sat Apr  7 03:24:48 2012] Offset between fit and detection position for source 61 = 0.067918 pixels
[Sat Apr  7 03:24:48 2012] 952.246000 total counts/ 698.016000 bgd. counts: snr = 9.622637
Spatial fit parameters:
  Offset between fit and detection position for source 61 = 0.067918 pixels
  Position = (269.5, 229.9) = 0 43 2.97 41 10 14.2
  Extent = 4.4 (3.9-5.0)", rotation angle = 0
  Source counts = 254.2 +/- 30.9
  Background counts = 698.0
  Rate = 0.01 +/- 0.001
[Sat Apr  7 03:24:48 2012] Vigneting correction estimate = 1.000000
[Sat Apr  7 03:24:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Apr  7 03:24:48 2012] Assessing source extent using major axis lower bound
[Sat Apr  7 03:24:48 2012] Source does appear to be extended
[Sat Apr  7 03:24:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Apr  7 03:25:29 2012] XMMSAS src. selection expression = ellipse(23394.397400, 19948.771200, 266.627408, 266.627408, 0.000000, X, Y)
[Sat Apr  7 03:25:29 2012] Writing source region out to fullrun_pn_xmm0505720301_pi300-10000_pass1_cl_src61_src.reg
[Sat Apr  7 03:25:29 2012] Extracting stamp from image fullrun_pn_xmm0505720301_pi300-10000_cl_sm2.00.img.gz, (254, 215) - (285, 245)
[Sat Apr  7 03:25:29 2012] XMMSAS bgd. selection expression = annulus(23394.397400, 19948.771200, 444.379013, 888.758026, X, Y) && !ellipse(24569.211600, 20950.426200, 456.180813, 456.180813, 0.000000, X, Y)
[Sat Apr  7 03:25:29 2012] Writing fullrun_pn_xmm0505720301_pi300-10000_pass1_cl_src61.gif
[Sat Apr  7 04:26:59 2012] Mean detx,y = (-1163.26, 7955.52) 
[Sat Apr  7 04:27:00 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Apr  7 04:27:08 2012] Binned source spectrum to 10 counts/bin
[Sat Apr  7 04:27:08 2012] Setting source spectrum file to fullrun_pn_xmm0505720301_pi300-10000_pass1_cl_src61_src_b10.pi.gz
[Sat Apr  7 04:27:08 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505720301_pi300-10000_pass1_cl_src61_bgd.pi.gz
[Sat Apr  7 13:31:44 2012] Updating aperture counts using extracted products
[Sat Apr  7 13:31:44 2012] Error reading totcts from fullrun_pn_xmm0505720301_pi300-10000_pass1_cl_src61_src_b10.pi.gz
[Sat Apr  7 13:31:51 2012] Calculating source flux in energy range 0.30-8.00
[Sat Apr  7 13:31:51 2012] Using photon index=1.80, rate=0.0101, arf fullrun_pn_xmm0505720301_pi300-10000_pass1_cl_src61.arf
[Sat Apr  7 13:31:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Apr  7 13:31:51 2012] Updating source flux to 4.8e-14