[Fri Apr  6 11:35:34 2012] Detection parameters:
  Position = (350.0, 271.0) = 0 42 31.94 41 13 13.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 6176.2 +/- 95.0
  Background counts = 128.7
  Rate = 0.3 +/- 0.005

[Fri Apr  6 11:35:37 2012] Off-axis axis estimate = 4.23'
[Fri Apr  6 11:38:09 2012] Using EEF radius (= 8.54 ")to estimate initial spatial extent for simple fitting
[Fri Apr  6 11:38:09 2012] Initial guess for spatial extent in simple fitting = 8.54"
[Fri Apr  6 11:38:09 2012] source mask rpix=2.0, npix_max = 24, mask sum = 19, frac = 0.782
[Fri Apr  6 11:38:09 2012] Giving source the simple spatial ID 51 for pass 0, mean size = 8.54"
[Fri Apr  6 15:40:00 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_src51.ximg exists
[Fri Apr  6 15:40:00 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_src51_1.ximg exists
[Fri Apr  6 15:40:00 2012] Fit fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_src51 appears to have run properly
[Fri Apr  6 15:40:01 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src51.ximg exists
[Fri Apr  6 15:40:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src51.csv
[Fri Apr  6 15:40:01 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src51_1.ximg exists
[Fri Apr  6 15:40:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src51.csv
[Fri Apr  6 15:40:01 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src51_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Apr  6 20:26:37 2012] Spatial fit model total counts = 7229.550000, observed total counts = 6638.000000
[Fri Apr  6 20:26:37 2012] Offset between fit and detection position for source 53 = 0.055688 pixels
[Fri Apr  6 20:26:37 2012] 7231.150000 total counts/ 2924.500000 bgd. counts: snr = 79.636794
Spatial fit parameters:
  Offset between fit and detection position for source 53 = 0.055688 pixels
  Position = (349.9, 271.1) = 0 42 31.95 41 13 13.5
  Extent = 6.0" x 5.2", rotation angle = 336
  Source counts = 4306.6 +/- 85.0
  Background counts = 2924.5
  Rate = 0.2 +/- 0.003
[Fri Apr  6 20:26:37 2012] Vigneting correction estimate = 1.000000
[Fri Apr  6 20:26:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Apr  6 20:26:37 2012] Assessing source extent using major
[Fri Apr  6 20:26:37 2012] Source does appear to be extended
[Fri Apr  6 20:26:37 2012] Computing asymmetry using major and minor axis, asym = 1.15
[Fri Apr  6 20:27:23 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Apr  6 20:27:23 2012] Initial guess for spatial extent in simple fitting = 5.57"
[Fri Apr  6 20:27:23 2012] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.261
[Fri Apr  6 20:27:23 2012] Giving source the simple spatial ID 49 for pass 1, mean size = 5.57"
[Fri Apr  6 23:19:28 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_src49.ximg exists
[Fri Apr  6 23:19:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_src49.csv
[Fri Apr  6 23:19:28 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_src49_1.ximg exists
[Fri Apr  6 23:19:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_src49.csv
[Fri Apr  6 23:19:28 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_src49_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Apr  6 23:19:29 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src49.ximg exists
[Fri Apr  6 23:19:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src49.csv
[Fri Apr  6 23:19:29 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src49_1.ximg exists
[Fri Apr  6 23:19:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src49.csv
[Fri Apr  6 23:19:29 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src49_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Apr  7 03:24:48 2012] Spatial fit model total counts = 7400.470000, observed total counts = 6638.000000
[Sat Apr  7 03:24:48 2012] Poor agreement between spatial fit and data for source 53
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Apr  7 03:24:48 2012] Vigneting correction estimate = 1.000000
[Sat Apr  7 03:24:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Apr  7 03:24:48 2012] Assessing source extent using major
[Sat Apr  7 03:24:48 2012] Source does appear to be extended
[Sat Apr  7 03:24:48 2012] Computing asymmetry using major and minor axis, asym = 1.15
[Sat Apr  7 03:25:29 2012] Counts = 4306.650000, rescaling region sizes by 2.000000
[Sat Apr  7 03:25:29 2012] XMMSAS src. selection expression = ellipse(30396.212548, 23535.140106, 715.931314, 621.256494, 335.954018, X, Y)
[Sat Apr  7 03:25:29 2012] Writing source region out to fullrun_pn_xmm0505720301_pi300-10000_pass1_cl_src53_src.reg
[Sat Apr  7 03:25:29 2012] Extracting stamp from image fullrun_pn_xmm0505720301_pi300-10000_cl_sm2.00.img.gz, (309, 230) - (391, 312)
[Sat Apr  7 03:25:29 2012] XMMSAS bgd. selection expression = annulus(30396.212548, 23535.140106, 2386.437713, 4772.875427, X, Y) && !ellipse(28930.461940, 26922.650200, 1326.986438, 1326.986438, 0.000000, X, Y) && !ellipse(35384.608000, 28664.066000, 1667.816048, 1667.816048, 0.000000, X, Y) && !ellipse(27442.152808, 28722.972400, 742.076021, 742.076021, 0.000000, X, Y) && !ellipse(28097.574432, 28212.274353, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33884.796000, 28544.732000, 1626.528047, 1575.424045, 60.635000, X, Y) && !ellipse(25845.472382, 27778.007141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30620.234589, 27321.355377, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27008.907400, 27352.190200, 501.600014, 501.600014, 0.000000, X, Y) && !ellipse(27643.017400, 27031.223400, 546.408016, 387.357611, 46.781000, X, Y) && !ellipse(32460.988000, 26352.224000, 327.983209, 327.983209, 0.000000, X, Y) && !ellipse(25789.142092, 26444.785800, 394.046411, 394.046411, 0.000000, X, Y) && !ellipse(26736.300400, 26138.524200, 568.360816, 568.360816, 0.000000, X, Y) && !ellipse(28144.030000, 25322.782000, 1219.832035, 1219.832035, 0.000000, X, Y) && !ellipse(32423.195953, 24586.521210, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29273.898240, 24998.945600, 306.724809, 306.724809, 0.000000, X, Y) && !ellipse(27466.720886, 24599.679535, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33433.968160, 24488.917600, 429.511212, 429.511212, 0.000000, X, Y) && !ellipse(31952.045074, 24030.082825, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28459.308899, 23803.385803, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32584.237680, 23933.104600, 371.655211, 371.655211, 0.000000, X, Y) && !ellipse(34195.420044, 22721.867584, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33508.532104, 22516.917908, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31244.644379, 22475.239258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27522.006020, 21611.188400, 436.870413, 436.870413, 0.000000, X, Y) && !ellipse(34995.794556, 20647.667099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31282.254860, 19659.705200, 445.722413, 445.722413, 0.000000, X, Y) && !ellipse(28410.257233, 29090.929749, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26566.323456, 28920.949463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25164.563568, 28550.408264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29041.360352, 28293.173096, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25270.108948, 28067.200897, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29106.923645, 27828.497833, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34946.668549, 27850.250488, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25076.931671, 27542.638794, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24897.903046, 27018.846649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33780.423035, 25877.853119, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35311.135040, 25864.739929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31122.109467, 25516.931091, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24833.215912, 25273.504730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25452.299713, 25005.936188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26910.510834, 25021.438904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26130.351715, 24756.578491, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25967.784600, 23327.306400, 335.480010, 335.480010, 0.000000, X, Y)
[Sat Apr  7 03:25:29 2012] Writing fullrun_pn_xmm0505720301_pi300-10000_pass1_cl_src53.gif
[Sat Apr  7 04:19:23 2012] Mean detx,y = (4008.01, 2005.54) 
[Sat Apr  7 04:19:25 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Apr  7 04:19:56 2012] Binned source spectrum to 10 counts/bin
[Sat Apr  7 04:19:57 2012] Setting source spectrum file to fullrun_pn_xmm0505720301_pi300-10000_pass1_cl_src53_src_b10.pi.gz
[Sat Apr  7 04:19:57 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505720301_pi300-10000_pass1_cl_src53_bgd.pi.gz
[Sat Apr  7 13:31:44 2012] Updating aperture counts using extracted products
[Sat Apr  7 13:31:44 2012] Error reading totcts from fullrun_pn_xmm0505720301_pi300-10000_pass1_cl_src53_src_b10.pi.gz
[Sat Apr  7 13:31:50 2012] Calculating source flux in energy range 0.30-8.00
[Sat Apr  7 13:31:50 2012] Using photon index=1.80, rate=0.17, arf fullrun_pn_xmm0505720301_pi300-10000_pass1_cl_src53.arf
[Sat Apr  7 13:31:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Apr  7 13:31:50 2012] Updating source flux to 5.1e-13
[Sat Apr  7 13:51:45 2012] Flag p found in src. 53 procflags, skipping spectral fitting