[Fri Apr  6 11:35:33 2012] Detection parameters:
  Position = (180.7, 291.9) = 0 43 37.22 41 14 44.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2238.7 +/- 57.8
  Background counts = 39.5
  Rate = 0.09 +/- 0.002

[Fri Apr  6 11:35:37 2012] Off-axis axis estimate = 8.55'
[Fri Apr  6 11:38:09 2012] Using EEF radius (= 10.70 ")to estimate initial spatial extent for simple fitting
[Fri Apr  6 11:38:09 2012] Initial guess for spatial extent in simple fitting = 10.70"
[Fri Apr  6 11:38:09 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.027
[Fri Apr  6 11:38:09 2012] Giving source the simple spatial ID 39 for pass 0, mean size = 10.70"
[Fri Apr  6 15:40:00 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_src39.ximg exists
[Fri Apr  6 15:40:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_src39.csv
[Fri Apr  6 15:40:00 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_src39_1.ximg exists
[Fri Apr  6 15:40:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_src39.csv
[Fri Apr  6 15:40:00 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Apr  6 15:40:01 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Fri Apr  6 15:40:01 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Fri Apr  6 15:40:01 2012] Fit fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src39 appears to have run properly
[Fri Apr  6 20:26:37 2012] Warning: source 39 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 41 at 14.919426 pixels away
[Fri Apr  6 20:26:37 2012] Vigneting correction estimate = 1.000000
[Fri Apr  6 20:26:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Apr  6 20:26:37 2012] Assessing source extent using major
[Fri Apr  6 20:26:37 2012] Source does appear to be extended
[Fri Apr  6 20:26:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Apr  6 20:27:23 2012] Using EEF radius (= 10.70 ")to estimate initial spatial extent for simple fitting
[Fri Apr  6 20:27:23 2012] Initial guess for spatial extent in simple fitting = 10.70"
[Fri Apr  6 20:27:23 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.027
[Fri Apr  6 20:27:23 2012] Giving source the simple spatial ID 38 for pass 1, mean size = 10.70"
[Fri Apr  6 23:19:28 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_src38.ximg exists
[Fri Apr  6 23:19:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_src38.csv
[Fri Apr  6 23:19:28 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_src38_1.ximg exists
[Fri Apr  6 23:19:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_src38.csv
[Fri Apr  6 23:19:28 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_src38_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Apr  6 23:19:29 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src38.ximg exists
[Fri Apr  6 23:19:29 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src38_1.ximg exists
[Fri Apr  6 23:19:29 2012] Fit fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src38 appears to have run properly
[Sat Apr  7 03:24:48 2012] Warning: source 38 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 41 at 14.919426 pixels away
[Sat Apr  7 03:24:48 2012] Vigneting correction estimate = 1.000000
[Sat Apr  7 03:24:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Apr  7 03:24:48 2012] Assessing source extent using major
[Sat Apr  7 03:24:48 2012] Source does appear to be extended
[Sat Apr  7 03:24:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Apr  7 03:25:28 2012] Counts = 2238.654785, rescaling region sizes by 2.000000
[Sat Apr  7 03:25:28 2012] XMMSAS src. selection expression = ellipse(15671.183731, 25347.983612, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sat Apr  7 03:25:28 2012] Writing source region out to fullrun_pn_xmm0505720301_pi300-10000_pass1_cl_src41_src.reg
[Sat Apr  7 03:25:28 2012] Extracting stamp from image fullrun_pn_xmm0505720301_pi300-10000_cl_sm2.00.img.gz, (106, 217) - (256, 367)
[Sat Apr  7 03:25:28 2012] XMMSAS bgd. selection expression = annulus(15671.183731, 25347.983612, 4350.000000, 8700.000000, X, Y) && !ellipse(11373.779861, 34145.986053, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23356.408966, 33320.444519, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24183.849600, 30831.645600, 462.433613, 407.790412, 324.477000, X, Y) && !ellipse(25158.857910, 29982.087677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17809.492554, 29867.207214, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23226.214800, 29344.041400, 415.885612, 415.885612, 0.000000, X, Y) && !ellipse(11986.422562, 28171.501068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24143.333099, 26983.144470, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23248.474060, 26920.647736, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24499.274292, 26245.003845, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23400.923187, 26128.440094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21708.375500, 25479.082000, 449.832813, 449.832813, 0.000000, X, Y) && !ellipse(19587.871002, 24156.964020, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16341.306488, 23712.958160, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22124.616089, 22990.399902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24569.211600, 20950.426200, 456.180813, 456.180813, 0.000000, X, Y) && !ellipse(16786.902710, 20350.793671, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23394.397400, 19948.771200, 355.503210, 355.503210, 0.000000, X, Y) && !ellipse(17486.968887, 17005.173996, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20787.998672, 16661.877380, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21018.159180, 16291.362732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22430.948059, 32048.308472, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18567.090000, 31127.160000, 1632.960047, 1632.960047, 0.000000, X, Y) && !ellipse(19354.781180, 29066.218000, 366.735211, 366.735211, 0.000000, X, Y) && !ellipse(25164.563568, 28550.408264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25076.931671, 27542.638794, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24897.903046, 27018.846649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24833.215912, 25273.504730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23830.427277, 24363.376617, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Apr  7 03:25:28 2012] Writing fullrun_pn_xmm0505720301_pi300-10000_pass1_cl_src41.gif
[Sat Apr  7 04:09:45 2012] Mean detx,y = (-10302.19, 5847.75) 
[Sat Apr  7 04:09:48 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Apr  7 04:11:34 2012] Binned source spectrum to 10 counts/bin
[Sat Apr  7 04:11:35 2012] Setting source spectrum file to fullrun_pn_xmm0505720301_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Sat Apr  7 04:11:35 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505720301_pi300-10000_pass1_cl_src41_bgd.pi.gz
[Sat Apr  7 07:20:07 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Apr  7 07:20:07 2012] rmf not generated due to insufficient counts
[Sat Apr  7 13:31:43 2012] Updating aperture counts using extracted products
[Sat Apr  7 13:31:43 2012] Error reading totcts from fullrun_pn_xmm0505720301_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Sat Apr  7 13:31:49 2012] Calculating source flux in energy range 0.30-8.00
[Sat Apr  7 13:31:49 2012] Using photon index=1.80, rate=0.0883, arf fullrun_pn_xmm0505720301_pi300-10000_pass1_cl_src41.arf
[Sat Apr  7 13:31:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Apr  7 13:31:49 2012] Updating source flux to 4.2e-13
[Sat Apr  7 13:51:45 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting