[Fri Apr  6 11:35:33 2012] Detection parameters:
  Position = (323.6, 291.9) = 0 42 42.09 41 14 44.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2226.9 +/- 62.9
  Background counts = 166.7
  Rate = 0.1 +/- 0.003

[Fri Apr  6 11:35:37 2012] Off-axis axis estimate = 1.89'
[Fri Apr  6 11:38:09 2012] Using EEF radius (= 7.37 ")to estimate initial spatial extent for simple fitting
[Fri Apr  6 11:38:09 2012] Initial guess for spatial extent in simple fitting = 7.37"
[Fri Apr  6 11:38:09 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.038
[Fri Apr  6 11:38:09 2012] Giving source the simple spatial ID 36 for pass 0, mean size = 7.37"
[Fri Apr  6 15:40:00 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_src36.ximg exists
[Fri Apr  6 15:40:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_src36.csv
[Fri Apr  6 15:40:00 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_src36_1.ximg exists
[Fri Apr  6 15:40:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_src36.csv
[Fri Apr  6 15:40:00 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_src36_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Apr  6 15:40:01 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src36.ximg exists
[Fri Apr  6 15:40:01 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src36_1.ximg exists
[Fri Apr  6 15:40:01 2012] Fit fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src36 appears to have run properly
[Fri Apr  6 20:26:37 2012] Warning, spatial fit 36 centroid is now closest to src. 43
[Fri Apr  6 20:26:37 2012] Spatial fit model total counts = 6640.190000, observed total counts = 6636.000000
[Fri Apr  6 20:26:37 2012] Offset between fit and detection position for source 38 = 0.514072 pixels
[Fri Apr  6 20:26:37 2012] Warning, changing simple spatial fit ID from 36 to 41
[Fri Apr  6 20:26:37 2012] 6622.720000 total counts/ 4424.190000 bgd. counts: snr = 33.053352
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 0.514072 pixels
  Position = (324.1, 291.6) = 0 42 41.93 41 14 42.9
  Extent = 15.2 (15.2-15.3)", rotation angle = 0
  Source counts = 2198.5 +/- 81.4
  Background counts = 4424.2
  Rate = 0.09 +/- 0.003
[Fri Apr  6 20:26:37 2012] Vigneting correction estimate = 1.000000
[Fri Apr  6 20:26:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Apr  6 20:26:37 2012] Assessing source extent using major axis lower bound
[Fri Apr  6 20:26:37 2012] Source does appear to be extended
[Fri Apr  6 20:26:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Apr  6 20:27:23 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Apr  6 20:27:23 2012] Initial guess for spatial extent in simple fitting = 15.25"
[Fri Apr  6 20:27:23 2012] source mask rpix=3.5, npix_max = 64, mask sum = 64, frac = 0.997
[Fri Apr  6 20:27:23 2012] Giving source the simple spatial ID 35 for pass 1, mean size = 15.25"
[Fri Apr  6 23:19:28 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_src35.ximg exists
[Fri Apr  6 23:19:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_src35.csv
[Fri Apr  6 23:19:28 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_src35_1.ximg exists
[Fri Apr  6 23:19:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_src35.csv
[Fri Apr  6 23:19:28 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Apr  6 23:19:29 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Fri Apr  6 23:19:29 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Fri Apr  6 23:19:29 2012] Fit fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src35 appears to have run properly
[Sat Apr  7 03:24:48 2012] Warning, spatial fit 35 centroid is now closest to src. 48
[Sat Apr  7 03:24:48 2012] Vigneting correction estimate = 1.000000
[Sat Apr  7 03:24:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Apr  7 03:24:48 2012] Assessing source extent using major axis lower bound
[Sat Apr  7 03:24:48 2012] Source does appear to be extended
[Sat Apr  7 03:24:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Apr  7 03:25:28 2012] Counts = 2198.530000, rescaling region sizes by 2.000000
[Sat Apr  7 03:25:28 2012] XMMSAS src. selection expression = ellipse(28144.030000, 25322.782000, 1829.748053, 1829.748053, 0.000000, X, Y)
[Sat Apr  7 03:25:28 2012] Writing source region out to fullrun_pn_xmm0505720301_pi300-10000_pass1_cl_src38_src.reg
[Sat Apr  7 03:25:28 2012] Extracting stamp from image fullrun_pn_xmm0505720301_pi300-10000_cl_sm2.00.img.gz, (219, 186) - (429, 397)
[Sat Apr  7 03:25:28 2012] XMMSAS bgd. selection expression = annulus(28144.030000, 25322.782000, 6099.160176, 12198.320351, X, Y) && !ellipse(28930.461940, 26922.650200, 1326.986438, 1326.986438, 0.000000, X, Y) && !ellipse(23356.408966, 33320.444519, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35607.916870, 32597.408356, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30966.726532, 13190.575256, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29697.224274, 31779.784119, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31312.350281, 13155.331070, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30591.790620, 31219.269000, 406.348812, 406.348812, 0.000000, X, Y) && !ellipse(31760.413000, 30755.603800, 434.318412, 434.318412, 0.000000, X, Y) && !ellipse(24183.849600, 30831.645600, 462.433613, 407.790412, 324.477000, X, Y) && !ellipse(34663.038378, 29980.583000, 448.335213, 448.335213, 0.000000, X, Y) && !ellipse(28569.997070, 30140.420349, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25158.857910, 29982.087677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17809.492554, 29867.207214, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26548.309082, 29523.683594, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35878.680120, 29555.450400, 464.757613, 383.944011, 59.904000, X, Y) && !ellipse(23226.214800, 29344.041400, 415.885612, 415.885612, 0.000000, X, Y) && !ellipse(35384.608000, 28664.066000, 1667.816048, 1667.816048, 0.000000, X, Y) && !ellipse(27442.152808, 28722.972400, 742.076021, 742.076021, 0.000000, X, Y) && !ellipse(28097.574432, 28212.274353, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33884.796000, 28544.732000, 1626.528047, 1575.424045, 60.635000, X, Y) && !ellipse(25845.472382, 27778.007141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30620.234589, 27321.355377, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27008.907400, 27352.190200, 501.600014, 501.600014, 0.000000, X, Y) && !ellipse(27643.017400, 27031.223400, 546.408016, 387.357611, 46.781000, X, Y) && !ellipse(24143.333099, 26983.144470, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23248.474060, 26920.647736, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32460.988000, 26352.224000, 327.983209, 327.983209, 0.000000, X, Y) && !ellipse(25789.142092, 26444.785800, 394.046411, 394.046411, 0.000000, X, Y) && !ellipse(24499.274292, 26245.003845, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26736.300400, 26138.524200, 568.360816, 568.360816, 0.000000, X, Y) && !ellipse(23400.923187, 26128.440094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21708.375500, 25479.082000, 449.832813, 449.832813, 0.000000, X, Y) && !ellipse(15671.183731, 25347.983612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32423.195953, 24586.521210, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29273.898240, 24998.945600, 306.724809, 306.724809, 0.000000, X, Y) && !ellipse(27466.720886, 24599.679535, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33433.968160, 24488.917600, 429.511212, 429.511212, 0.000000, X, Y) && !ellipse(31952.045074, 24030.082825, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28459.308899, 23803.385803, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19587.871002, 24156.964020, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32584.237680, 23933.104600, 371.655211, 371.655211, 0.000000, X, Y) && !ellipse(16341.306488, 23712.958160, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22124.616089, 22990.399902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30396.212548, 23535.140106, 477.287543, 414.170996, 335.954018, X, Y) && !ellipse(34195.420044, 22721.867584, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33508.532104, 22516.917908, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31244.644379, 22475.239258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27522.006020, 21611.188400, 436.870413, 436.870413, 0.000000, X, Y) && !ellipse(34995.794556, 20647.667099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24569.211600, 20950.426200, 456.180813, 456.180813, 0.000000, X, Y) && !ellipse(16786.902710, 20350.793671, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23394.397400, 19948.771200, 355.503210, 355.503210, 0.000000, X, Y) && !ellipse(31282.254860, 19659.705200, 445.722413, 445.722413, 0.000000, X, Y) && !ellipse(17486.968887, 17005.173996, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20787.998672, 16661.877380, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21018.159180, 16291.362732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29958.607200, 33780.981000, 559.893616, 559.893616, 0.000000, X, Y) && !ellipse(28263.205780, 32943.217957, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34165.205811, 32282.901550, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22430.948059, 32048.308472, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18567.090000, 31127.160000, 1632.960047, 1632.960047, 0.000000, X, Y) && !ellipse(27544.207916, 29973.166779, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29336.448273, 29249.339417, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28410.257233, 29090.929749, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19354.781180, 29066.218000, 366.735211, 366.735211, 0.000000, X, Y) && !ellipse(26566.323456, 28920.949463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25164.563568, 28550.408264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29041.360352, 28293.173096, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25270.108948, 28067.200897, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29106.923645, 27828.497833, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34946.668549, 27850.250488, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25076.931671, 27542.638794, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24897.903046, 27018.846649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33780.423035, 25877.853119, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35311.135040, 25864.739929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31122.109467, 25516.931091, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24833.215912, 25273.504730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39541.056030, 25260.917236, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25452.299713, 25005.936188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26910.510834, 25021.438904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23830.427277, 24363.376617, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26130.351715, 24756.578491, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25967.784600, 23327.306400, 335.480010, 335.480010, 0.000000, X, Y) && !ellipse(32491.398346, 16886.176910, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Apr  7 03:25:28 2012] Writing fullrun_pn_xmm0505720301_pi300-10000_pass1_cl_src38.gif
[Sat Apr  7 04:03:34 2012] Mean detx,y = (848.54, 429.06) 
[Sat Apr  7 04:03:40 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Apr  7 04:06:45 2012] Binned source spectrum to 10 counts/bin
[Sat Apr  7 04:06:45 2012] Setting source spectrum file to fullrun_pn_xmm0505720301_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Sat Apr  7 04:06:45 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505720301_pi300-10000_pass1_cl_src38_bgd.pi.gz
[Sat Apr  7 13:31:42 2012] Updating aperture counts using extracted products
[Sat Apr  7 13:31:42 2012] Error reading totcts from fullrun_pn_xmm0505720301_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Sat Apr  7 13:31:49 2012] Calculating source flux in energy range 0.30-8.00
[Sat Apr  7 13:31:49 2012] Using photon index=1.80, rate=0.0869, arf fullrun_pn_xmm0505720301_pi300-10000_pass1_cl_src38.arf
[Sat Apr  7 13:31:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Apr  7 13:31:49 2012] Updating source flux to 1.8e-13