[Fri Apr  6 11:35:33 2012] Detection parameters:
  Position = (307.8, 301.0) = 0 42 48.20 41 15 23.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 11968.9 +/- 133.0
  Background counts = 159.4
  Rate = 0.6 +/- 0.006

[Fri Apr  6 11:35:37 2012] Off-axis axis estimate = 0.70'
[Fri Apr  6 11:38:09 2012] Using EEF radius (= 6.78 ")to estimate initial spatial extent for simple fitting
[Fri Apr  6 11:38:09 2012] Initial guess for spatial extent in simple fitting = 6.78"
[Fri Apr  6 11:38:09 2012] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.944
[Fri Apr  6 11:38:09 2012] Giving source the simple spatial ID 35 for pass 0, mean size = 6.78"
[Fri Apr  6 15:40:00 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_src35.ximg exists
[Fri Apr  6 15:40:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_src35.csv
[Fri Apr  6 15:40:00 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_src35_1.ximg exists
[Fri Apr  6 15:40:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_src35.csv
[Fri Apr  6 15:40:00 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Apr  6 15:40:01 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Fri Apr  6 15:40:01 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Fri Apr  6 15:40:01 2012] Fit fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src35 appears to have run properly
[Fri Apr  6 20:26:37 2012] Spatial fit model total counts = 19610.200000, observed total counts = 19612.000000
[Fri Apr  6 20:26:37 2012] Offset between fit and detection position for source 37 = 0.091643 pixels
[Fri Apr  6 20:26:37 2012] 20174.660000 total counts/ 12286.000000 bgd. counts: snr = 71.170167
Spatial fit parameters:
  Offset between fit and detection position for source 37 = 0.091643 pixels
  Position = (307.9, 301.0) = 0 42 48.17 41 15 23.9
  Extent = 7.2 (7.1-7.4)", rotation angle = 0
  Source counts = 7888.7 +/- 142.0
  Background counts = 12286.0
  Rate = 0.3 +/- 0.006
[Fri Apr  6 20:26:37 2012] Vigneting correction estimate = 1.000000
[Fri Apr  6 20:26:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Apr  6 20:26:37 2012] Assessing source extent using major axis lower bound
[Fri Apr  6 20:26:37 2012] Source does appear to be extended
[Fri Apr  6 20:26:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Apr  6 20:27:23 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Apr  6 20:27:23 2012] Initial guess for spatial extent in simple fitting = 7.23"
[Fri Apr  6 20:27:23 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.856
[Fri Apr  6 20:27:23 2012] Giving source the simple spatial ID 34 for pass 1, mean size = 7.23"
[Fri Apr  6 23:19:28 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_src34.ximg exists
[Fri Apr  6 23:19:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_src34.csv
[Fri Apr  6 23:19:28 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_src34_1.ximg exists
[Fri Apr  6 23:19:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_src34.csv
[Fri Apr  6 23:19:28 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_src34_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Apr  6 23:19:29 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src34.ximg exists
[Fri Apr  6 23:19:29 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src34_1.ximg exists
[Fri Apr  6 23:19:29 2012] Fit fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src34 appears to have run properly
[Sat Apr  7 03:24:48 2012] Spatial fit model total counts = 19763.600000, observed total counts = 19767.000000
[Sat Apr  7 03:24:48 2012] Offset between fit and detection position for source 37 = 0.028494 pixels
[Sat Apr  7 03:24:48 2012] 20339.170000 total counts/ 12652.700000 bgd. counts: snr = 68.333762
Spatial fit parameters:
  Offset between fit and detection position for source 37 = 0.028494 pixels
  Position = (307.9, 301.0) = 0 42 48.17 41 15 23.7
  Extent = 7.1 (6.9-7.3)", rotation angle = 0
  Source counts = 7686.5 +/- 142.6
  Background counts = 12652.7
  Rate = 0.3 +/- 0.006
[Sat Apr  7 03:24:48 2012] Vigneting correction estimate = 1.000000
[Sat Apr  7 03:24:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Apr  7 03:24:48 2012] Assessing source extent using major axis lower bound
[Sat Apr  7 03:24:48 2012] Source does appear to be extended
[Sat Apr  7 03:24:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Apr  7 03:25:28 2012] Counts = 7686.470000, rescaling region sizes by 2.000000
[Sat Apr  7 03:25:28 2012] XMMSAS src. selection expression = ellipse(26736.300400, 26138.524200, 852.541225, 852.541225, 0.000000, X, Y)
[Sat Apr  7 03:25:28 2012] Writing source region out to fullrun_pn_xmm0505720301_pi300-10000_pass1_cl_src37_src.reg
[Sat Apr  7 03:25:28 2012] Extracting stamp from image fullrun_pn_xmm0505720301_pi300-10000_cl_sm2.00.img.gz, (259, 252) - (357, 350)
[Sat Apr  7 03:25:28 2012] XMMSAS bgd. selection expression = annulus(26736.300400, 26138.524200, 2841.804082, 5683.608164, X, Y) && !ellipse(28930.461940, 26922.650200, 1326.986438, 1326.986438, 0.000000, X, Y) && !ellipse(29697.224274, 31779.784119, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30591.790620, 31219.269000, 406.348812, 406.348812, 0.000000, X, Y) && !ellipse(31760.413000, 30755.603800, 434.318412, 434.318412, 0.000000, X, Y) && !ellipse(24183.849600, 30831.645600, 462.433613, 407.790412, 324.477000, X, Y) && !ellipse(28569.997070, 30140.420349, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25158.857910, 29982.087677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26548.309082, 29523.683594, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23226.214800, 29344.041400, 415.885612, 415.885612, 0.000000, X, Y) && !ellipse(27442.152808, 28722.972400, 742.076021, 742.076021, 0.000000, X, Y) && !ellipse(28097.574432, 28212.274353, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33884.796000, 28544.732000, 1626.528047, 1575.424045, 60.635000, X, Y) && !ellipse(25845.472382, 27778.007141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30620.234589, 27321.355377, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27008.907400, 27352.190200, 501.600014, 501.600014, 0.000000, X, Y) && !ellipse(27643.017400, 27031.223400, 546.408016, 387.357611, 46.781000, X, Y) && !ellipse(24143.333099, 26983.144470, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23248.474060, 26920.647736, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32460.988000, 26352.224000, 327.983209, 327.983209, 0.000000, X, Y) && !ellipse(25789.142092, 26444.785800, 394.046411, 394.046411, 0.000000, X, Y) && !ellipse(24499.274292, 26245.003845, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28144.030000, 25322.782000, 1219.832035, 1219.832035, 0.000000, X, Y) && !ellipse(23400.923187, 26128.440094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21708.375500, 25479.082000, 449.832813, 449.832813, 0.000000, X, Y) && !ellipse(32423.195953, 24586.521210, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29273.898240, 24998.945600, 306.724809, 306.724809, 0.000000, X, Y) && !ellipse(27466.720886, 24599.679535, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31952.045074, 24030.082825, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28459.308899, 23803.385803, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32584.237680, 23933.104600, 371.655211, 371.655211, 0.000000, X, Y) && !ellipse(22124.616089, 22990.399902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30396.212548, 23535.140106, 477.287543, 414.170996, 335.954018, X, Y) && !ellipse(31244.644379, 22475.239258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27522.006020, 21611.188400, 436.870413, 436.870413, 0.000000, X, Y) && !ellipse(24569.211600, 20950.426200, 456.180813, 456.180813, 0.000000, X, Y) && !ellipse(22430.948059, 32048.308472, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27544.207916, 29973.166779, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29336.448273, 29249.339417, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28410.257233, 29090.929749, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26566.323456, 28920.949463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25164.563568, 28550.408264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29041.360352, 28293.173096, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25270.108948, 28067.200897, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29106.923645, 27828.497833, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25076.931671, 27542.638794, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24897.903046, 27018.846649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31122.109467, 25516.931091, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24833.215912, 25273.504730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25452.299713, 25005.936188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26910.510834, 25021.438904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23830.427277, 24363.376617, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26130.351715, 24756.578491, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25967.784600, 23327.306400, 335.480010, 335.480010, 0.000000, X, Y)
[Sat Apr  7 03:25:28 2012] Writing fullrun_pn_xmm0505720301_pi300-10000_pass1_cl_src37.gif
[Sat Apr  7 04:02:23 2012] Mean detx,y = (-399.28, 865.05) 
[Sat Apr  7 04:02:26 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Apr  7 04:03:14 2012] Binned source spectrum to 10 counts/bin
[Sat Apr  7 04:03:14 2012] Setting source spectrum file to fullrun_pn_xmm0505720301_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Sat Apr  7 04:03:14 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505720301_pi300-10000_pass1_cl_src37_bgd.pi.gz
[Sat Apr  7 13:31:42 2012] Updating aperture counts using extracted products
[Sat Apr  7 13:31:42 2012] Error reading totcts from fullrun_pn_xmm0505720301_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Sat Apr  7 13:31:49 2012] Calculating source flux in energy range 0.30-8.00
[Sat Apr  7 13:31:49 2012] Using photon index=1.80, rate=0.304, arf fullrun_pn_xmm0505720301_pi300-10000_pass1_cl_src37.arf
[Sat Apr  7 13:31:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Apr  7 13:31:49 2012] Updating source flux to 7.1e-13