[Fri Apr  6 11:35:33 2012] Detection parameters:
  Position = (373.8, 304.3) = 0 42 22.75 41 15 33.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3562.8 +/- 70.3
  Background counts = 90.6
  Rate = 0.2 +/- 0.004

[Fri Apr  6 11:35:37 2012] Off-axis axis estimate = 5.48'
[Fri Apr  6 11:38:09 2012] Using EEF radius (= 9.17 ")to estimate initial spatial extent for simple fitting
[Fri Apr  6 11:38:09 2012] Initial guess for spatial extent in simple fitting = 9.17"
[Fri Apr  6 11:38:09 2012] source mask rpix=2.1, npix_max = 27, mask sum = 19, frac = 0.699
[Fri Apr  6 11:38:09 2012] Giving source the simple spatial ID 32 for pass 0, mean size = 9.17"
[Fri Apr  6 15:40:00 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_src32.ximg exists
[Fri Apr  6 15:40:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_src32.csv
[Fri Apr  6 15:40:00 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_src32_1.ximg exists
[Fri Apr  6 15:40:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_src32.csv
[Fri Apr  6 15:40:00 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_src32_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Apr  6 15:40:01 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src32.ximg exists
[Fri Apr  6 15:40:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src32.csv
[Fri Apr  6 15:40:01 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists
[Fri Apr  6 15:40:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src32.csv
[Fri Apr  6 15:40:01 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Apr  6 20:26:37 2012] Spatial fit model total counts = 6390.920000, observed total counts = 6168.000000
[Fri Apr  6 20:26:37 2012] Offset between fit and detection position for source 34 = 0.878473 pixels
[Fri Apr  6 20:26:37 2012] Warning, changing simple spatial fit ID from 32 to 30
[Fri Apr  6 20:26:37 2012] 6162.620000 total counts/ 4205.200000 bgd. counts: snr = 30.184966
Spatial fit parameters:
  Offset between fit and detection position for source 34 = 0.878473 pixels
  Position = (373.7, 303.5) = 0 42 22.79 41 15 34.2
  Extent = 4.1 (3.9-4.3)", rotation angle = 0
  Source counts = 1957.4 +/- 78.5
  Background counts = 4205.2
  Rate = 0.08 +/- 0.003
[Fri Apr  6 20:26:37 2012] Spatial fit model total counts = 7132.830000, observed total counts = 5995.000000
[Fri Apr  6 20:26:37 2012] Poor agreement between spatial fit and data for source 34
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Apr  6 20:26:37 2012] Vigneting correction estimate = 1.000000
[Fri Apr  6 20:26:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Apr  6 20:26:37 2012] Assessing source extent using major axis lower bound
[Fri Apr  6 20:26:37 2012] Source does appear to be extended
[Fri Apr  6 20:26:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Apr  6 20:26:37 2012] Source is confused with source 31
[Fri Apr  6 20:27:23 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Apr  6 20:27:23 2012] Initial guess for spatial extent in simple fitting = 4.11"
[Fri Apr  6 20:27:23 2012] source mask rpix=0.9, npix_max = 8, mask sum = 5, frac = 0.600
[Fri Apr  6 20:27:23 2012] Giving source the simple spatial ID 31 for pass 1, mean size = 4.11"
[Fri Apr  6 23:19:28 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_src31.ximg exists
[Fri Apr  6 23:19:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_src31.csv
[Fri Apr  6 23:19:28 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_src31_1.ximg exists
[Fri Apr  6 23:19:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_src31.csv
[Fri Apr  6 23:19:28 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Apr  6 23:19:29 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Fri Apr  6 23:19:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src31.csv
[Fri Apr  6 23:19:29 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Fri Apr  6 23:19:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src31.csv
[Fri Apr  6 23:19:29 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Apr  7 03:24:48 2012] Spatial fit model total counts = 6389.760000, observed total counts = 6168.000000
[Sat Apr  7 03:24:48 2012] Offset between fit and detection position for source 34 = 0.002154 pixels
[Sat Apr  7 03:24:48 2012] Warning, changing simple spatial fit ID from 31 to 29
[Sat Apr  7 03:24:48 2012] 6160.980000 total counts/ 4207.700000 bgd. counts: snr = 30.112175
Spatial fit parameters:
  Offset between fit and detection position for source 34 = 0.002154 pixels
  Position = (373.7, 303.5) = 0 42 22.79 41 15 34.2
  Extent = 4.1 (4.0-4.3)", rotation angle = 0
  Source counts = 1953.3 +/- 78.5
  Background counts = 4207.7
  Rate = 0.08 +/- 0.003
[Sat Apr  7 03:24:48 2012] Vigneting correction estimate = 1.000000
[Sat Apr  7 03:24:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Apr  7 03:24:48 2012] Assessing source extent using major axis lower bound
[Sat Apr  7 03:24:48 2012] Source does appear to be extended
[Sat Apr  7 03:24:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Apr  7 03:25:28 2012] Counts = 1953.280000, rescaling region sizes by 2.000000
[Sat Apr  7 03:25:28 2012] XMMSAS src. selection expression = ellipse(32460.988000, 26352.224000, 491.974814, 491.974814, 0.000000, X, Y)
[Sat Apr  7 03:25:28 2012] Writing source region out to fullrun_pn_xmm0505720301_pi300-10000_pass1_cl_src34_src.reg
[Sat Apr  7 03:25:28 2012] Extracting stamp from image fullrun_pn_xmm0505720301_pi300-10000_cl_sm2.00.img.gz, (345, 275) - (402, 332)
[Sat Apr  7 03:25:28 2012] XMMSAS bgd. selection expression = annulus(32460.988000, 26352.224000, 1639.916047, 3279.832094, X, Y) && !ellipse(28930.461940, 26922.650200, 1326.986438, 1326.986438, 0.000000, X, Y) && !ellipse(34663.038378, 29980.583000, 448.335213, 448.335213, 0.000000, X, Y) && !ellipse(28569.997070, 30140.420349, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35878.680120, 29555.450400, 464.757613, 383.944011, 59.904000, X, Y) && !ellipse(35384.608000, 28664.066000, 1667.816048, 1667.816048, 0.000000, X, Y) && !ellipse(33884.796000, 28544.732000, 1626.528047, 1575.424045, 60.635000, X, Y) && !ellipse(30620.234589, 27321.355377, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28144.030000, 25322.782000, 1219.832035, 1219.832035, 0.000000, X, Y) && !ellipse(32423.195953, 24586.521210, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29273.898240, 24998.945600, 306.724809, 306.724809, 0.000000, X, Y) && !ellipse(33433.968160, 24488.917600, 429.511212, 429.511212, 0.000000, X, Y) && !ellipse(31952.045074, 24030.082825, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28459.308899, 23803.385803, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32584.237680, 23933.104600, 371.655211, 371.655211, 0.000000, X, Y) && !ellipse(30396.212548, 23535.140106, 477.287543, 414.170996, 335.954018, X, Y) && !ellipse(34195.420044, 22721.867584, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33508.532104, 22516.917908, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31244.644379, 22475.239258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29336.448273, 29249.339417, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28410.257233, 29090.929749, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29041.360352, 28293.173096, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29106.923645, 27828.497833, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34946.668549, 27850.250488, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33780.423035, 25877.853119, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35311.135040, 25864.739929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31122.109467, 25516.931091, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Apr  7 03:25:28 2012] Writing fullrun_pn_xmm0505720301_pi300-10000_pass1_cl_src34.gif
[Sat Apr  7 04:00:42 2012] Mean detx,y = (4844.98, -1437.64) 
[Sat Apr  7 04:00:45 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Apr  7 04:01:07 2012] Binned source spectrum to 10 counts/bin
[Sat Apr  7 04:01:07 2012] Setting source spectrum file to fullrun_pn_xmm0505720301_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Sat Apr  7 04:01:07 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505720301_pi300-10000_pass1_cl_src34_bgd.pi.gz
[Sat Apr  7 13:31:42 2012] Updating aperture counts using extracted products
[Sat Apr  7 13:31:42 2012] Error reading totcts from fullrun_pn_xmm0505720301_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Sat Apr  7 13:31:49 2012] Calculating source flux in energy range 0.30-8.00
[Sat Apr  7 13:31:49 2012] Using photon index=1.80, rate=0.0772, arf fullrun_pn_xmm0505720301_pi300-10000_pass1_cl_src34.arf
[Sat Apr  7 13:31:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Apr  7 13:31:49 2012] Updating source flux to 3.2e-13
[Sat Apr  7 13:51:45 2012] Flag p found in src. 34 procflags, skipping spectral fitting
[Sat Apr  7 13:51:45 2012] Flag c found in src. 34 procflags, skipping spectral fitting