[Fri Apr  6 11:35:33 2012] Detection parameters:
  Position = (316.0, 328.4) = 0 42 45.02 41 17 22.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 972.9 +/- 42.6
  Background counts = 130.0
  Rate = 0.05 +/- 0.002

[Fri Apr  6 11:35:37 2012] Off-axis axis estimate = 2.52'
[Fri Apr  6 11:38:09 2012] Using EEF radius (= 7.69 ")to estimate initial spatial extent for simple fitting
[Fri Apr  6 11:38:09 2012] Initial guess for spatial extent in simple fitting = 7.69"
[Fri Apr  6 11:38:09 2012] source mask rpix=1.8, npix_max = 20, mask sum = 18, frac = 0.875
[Fri Apr  6 11:38:09 2012] Giving source the simple spatial ID 22 for pass 0, mean size = 7.69"
[Fri Apr  6 15:40:00 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_src22.ximg exists
[Fri Apr  6 15:40:00 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_src22_1.ximg exists
[Fri Apr  6 15:40:00 2012] Fit fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_src22 appears to have run properly
[Fri Apr  6 15:40:01 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Fri Apr  6 15:40:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src22.csv
[Fri Apr  6 15:40:01 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Fri Apr  6 15:40:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src22.csv
[Fri Apr  6 15:40:01 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Apr  6 20:26:37 2012] Spatial fit model total counts = 3967.150000, observed total counts = 4157.000000
[Fri Apr  6 20:26:37 2012] Offset between fit and detection position for source 23 = 2.278783 pixels
[Fri Apr  6 20:26:37 2012] 4915.400000 total counts/ 4134.640000 bgd. counts: snr = 12.142237
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 2.278783 pixels
  Position = (316.0, 330.7) = 0 42 45.04 41 17 33.0
  Extent = 9.3" x 9.3", rotation angle = 0
  Source counts = 780.8 +/- 70.1
  Background counts = 4134.6
  Rate = 0.03 +/- 0.003
[Fri Apr  6 20:26:37 2012] Vigneting correction estimate = 1.000000
[Fri Apr  6 20:26:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Apr  6 20:26:37 2012] Assessing source extent using major
[Fri Apr  6 20:26:37 2012] Source does appear to be extended
[Fri Apr  6 20:26:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Apr  6 20:27:23 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Apr  6 20:27:23 2012] Initial guess for spatial extent in simple fitting = 9.28"
[Fri Apr  6 20:27:23 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.082
[Fri Apr  6 20:27:23 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 9.28"
[Fri Apr  6 23:19:28 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_src21.ximg exists
[Fri Apr  6 23:19:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_src21.csv
[Fri Apr  6 23:19:28 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_src21_1.ximg exists
[Fri Apr  6 23:19:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_src21.csv
[Fri Apr  6 23:19:28 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Apr  6 23:19:29 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Fri Apr  6 23:19:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src21.csv
[Fri Apr  6 23:19:29 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Fri Apr  6 23:19:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src21.csv
[Fri Apr  6 23:19:29 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Apr  7 03:24:48 2012] Spatial fit model total counts = 4643.470000, observed total counts = 3817.000000
[Sat Apr  7 03:24:48 2012] Poor agreement between spatial fit and data for source 23
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Apr  7 03:24:48 2012] Vigneting correction estimate = 1.000000
[Sat Apr  7 03:24:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Apr  7 03:24:48 2012] Assessing source extent using major
[Sat Apr  7 03:24:48 2012] Source does appear to be extended
[Sat Apr  7 03:24:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Apr  7 03:25:27 2012] XMMSAS src. selection expression = ellipse(27442.152808, 28722.972400, 556.557016, 556.557016, 0.000000, X, Y)
[Sat Apr  7 03:25:27 2012] Writing source region out to fullrun_pn_xmm0505720301_pi300-10000_pass1_cl_src23_src.reg
[Sat Apr  7 03:25:27 2012] Extracting stamp from image fullrun_pn_xmm0505720301_pi300-10000_cl_sm2.00.img.gz, (284, 299) - (348, 363)
[Sat Apr  7 03:25:27 2012] XMMSAS bgd. selection expression = annulus(27442.152808, 28722.972400, 927.595027, 1855.190053, X, Y) && !ellipse(28930.461940, 26922.650200, 1326.986438, 1326.986438, 0.000000, X, Y) && !ellipse(28569.997070, 30140.420349, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25158.857910, 29982.087677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26548.309082, 29523.683594, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28097.574432, 28212.274353, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25845.472382, 27778.007141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27008.907400, 27352.190200, 501.600014, 501.600014, 0.000000, X, Y) && !ellipse(27643.017400, 27031.223400, 546.408016, 387.357611, 46.781000, X, Y) && !ellipse(27544.207916, 29973.166779, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29336.448273, 29249.339417, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28410.257233, 29090.929749, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26566.323456, 28920.949463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25164.563568, 28550.408264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29041.360352, 28293.173096, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25270.108948, 28067.200897, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29106.923645, 27828.497833, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25076.931671, 27542.638794, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24897.903046, 27018.846649, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Apr  7 03:25:27 2012] Writing fullrun_pn_xmm0505720301_pi300-10000_pass1_cl_src23.gif
[Sat Apr  7 03:45:28 2012] Mean detx,y = (-677.82, -1666.84) 
[Sat Apr  7 03:45:30 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Apr  7 03:45:40 2012] Binned source spectrum to 10 counts/bin
[Sat Apr  7 03:45:40 2012] Setting source spectrum file to fullrun_pn_xmm0505720301_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Sat Apr  7 03:45:40 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505720301_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Sat Apr  7 13:31:41 2012] Updating aperture counts using extracted products
[Sat Apr  7 13:31:41 2012] Error reading totcts from fullrun_pn_xmm0505720301_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Sat Apr  7 13:31:48 2012] Calculating source flux in energy range 0.30-8.00
[Sat Apr  7 13:31:48 2012] Using photon index=1.80, rate=0.0309, arf fullrun_pn_xmm0505720301_pi300-10000_pass1_cl_src23.arf
[Sat Apr  7 13:31:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Apr  7 13:31:48 2012] Updating source flux to 9.2e-14
[Sat Apr  7 13:51:45 2012] Flag p found in src. 23 procflags, skipping spectral fitting