[Fri Apr  6 11:35:33 2012] Detection parameters:
  Position = (267.6, 337.8) = 0 43 3.71 41 18 5.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3420.0 +/- 70.4
  Background counts = 111.1
  Rate = 0.2 +/- 0.004

[Fri Apr  6 11:35:37 2012] Off-axis axis estimate = 3.62'
[Fri Apr  6 11:38:09 2012] Using EEF radius (= 8.24 ")to estimate initial spatial extent for simple fitting
[Fri Apr  6 11:38:09 2012] Initial guess for spatial extent in simple fitting = 8.24"
[Fri Apr  6 11:38:09 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.090
[Fri Apr  6 11:38:09 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 8.24"
[Fri Apr  6 15:40:00 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_src20.ximg exists
[Fri Apr  6 15:40:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_src20.csv
[Fri Apr  6 15:40:00 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_src20_1.ximg exists
[Fri Apr  6 15:40:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_src20.csv
[Fri Apr  6 15:40:00 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Apr  6 15:40:01 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Fri Apr  6 15:40:01 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Fri Apr  6 15:40:01 2012] Fit fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Fri Apr  6 20:26:37 2012] Spatial fit model total counts = 4229.660000, observed total counts = 4001.000000
[Fri Apr  6 20:26:37 2012] Offset between fit and detection position for source 21 = 0.115802 pixels
[Fri Apr  6 20:26:37 2012] 4229.230000 total counts/ 1790.130000 bgd. counts: snr = 57.648408
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.115802 pixels
  Position = (267.5, 337.8) = 0 43 3.74 41 18 4.0
  Extent = 5.2 (5.0-5.4)", rotation angle = 0
  Source counts = 2439.1 +/- 65.0
  Background counts = 1790.1
  Rate = 0.1 +/- 0.003
[Fri Apr  6 20:26:37 2012] Vigneting correction estimate = 1.000000
[Fri Apr  6 20:26:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Apr  6 20:26:37 2012] Assessing source extent using major axis lower bound
[Fri Apr  6 20:26:37 2012] Source does appear to be extended
[Fri Apr  6 20:26:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Apr  6 20:27:23 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Apr  6 20:27:23 2012] Initial guess for spatial extent in simple fitting = 5.19"
[Fri Apr  6 20:27:23 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.047
[Fri Apr  6 20:27:23 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 5.19"
[Fri Apr  6 23:19:28 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_src19.ximg exists
[Fri Apr  6 23:19:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_src19.csv
[Fri Apr  6 23:19:28 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_src19_1.ximg exists
[Fri Apr  6 23:19:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_src19.csv
[Fri Apr  6 23:19:28 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Apr  6 23:19:29 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Fri Apr  6 23:19:29 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Fri Apr  6 23:19:29 2012] Fit fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Sat Apr  7 03:24:48 2012] Spatial fit model total counts = 4229.480000, observed total counts = 4001.000000
[Sat Apr  7 03:24:48 2012] Offset between fit and detection position for source 21 = 0.000763 pixels
[Sat Apr  7 03:24:48 2012] 4229.060000 total counts/ 1788.410000 bgd. counts: snr = 57.712775
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.000763 pixels
  Position = (267.5, 337.8) = 0 43 3.74 41 18 4.0
  Extent = 5.2 (5.0-5.4)", rotation angle = 0
  Source counts = 2440.7 +/- 65.0
  Background counts = 1788.4
  Rate = 0.1 +/- 0.003
[Sat Apr  7 03:24:48 2012] Vigneting correction estimate = 1.000000
[Sat Apr  7 03:24:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Apr  7 03:24:48 2012] Assessing source extent using major axis lower bound
[Sat Apr  7 03:24:48 2012] Source does appear to be extended
[Sat Apr  7 03:24:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Apr  7 03:25:27 2012] Counts = 2440.650000, rescaling region sizes by 2.000000
[Sat Apr  7 03:25:27 2012] XMMSAS src. selection expression = ellipse(23226.214800, 29344.041400, 623.828418, 623.828418, 0.000000, X, Y)
[Sat Apr  7 03:25:27 2012] Writing source region out to fullrun_pn_xmm0505720301_pi300-10000_pass1_cl_src21_src.reg
[Sat Apr  7 03:25:27 2012] Extracting stamp from image fullrun_pn_xmm0505720301_pi300-10000_cl_sm2.00.img.gz, (232, 302) - (303, 374)
[Sat Apr  7 03:25:27 2012] XMMSAS bgd. selection expression = annulus(23226.214800, 29344.041400, 2079.428060, 4158.856120, X, Y) && !ellipse(23356.408966, 33320.444519, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24183.849600, 30831.645600, 462.433613, 407.790412, 324.477000, X, Y) && !ellipse(25158.857910, 29982.087677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26548.309082, 29523.683594, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27442.152808, 28722.972400, 742.076021, 742.076021, 0.000000, X, Y) && !ellipse(28097.574432, 28212.274353, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25845.472382, 27778.007141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27008.907400, 27352.190200, 501.600014, 501.600014, 0.000000, X, Y) && !ellipse(27643.017400, 27031.223400, 546.408016, 387.357611, 46.781000, X, Y) && !ellipse(24143.333099, 26983.144470, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23248.474060, 26920.647736, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25789.142092, 26444.785800, 394.046411, 394.046411, 0.000000, X, Y) && !ellipse(24499.274292, 26245.003845, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26736.300400, 26138.524200, 568.360816, 568.360816, 0.000000, X, Y) && !ellipse(28144.030000, 25322.782000, 1219.832035, 1219.832035, 0.000000, X, Y) && !ellipse(23400.923187, 26128.440094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21708.375500, 25479.082000, 449.832813, 449.832813, 0.000000, X, Y) && !ellipse(27466.720886, 24599.679535, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22430.948059, 32048.308472, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18567.090000, 31127.160000, 1632.960047, 1632.960047, 0.000000, X, Y) && !ellipse(27544.207916, 29973.166779, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19354.781180, 29066.218000, 366.735211, 366.735211, 0.000000, X, Y) && !ellipse(26566.323456, 28920.949463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25164.563568, 28550.408264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25270.108948, 28067.200897, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25076.931671, 27542.638794, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24897.903046, 27018.846649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24833.215912, 25273.504730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25452.299713, 25005.936188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26910.510834, 25021.438904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23830.427277, 24363.376617, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26130.351715, 24756.578491, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Apr  7 03:25:27 2012] Writing fullrun_pn_xmm0505720301_pi300-10000_pass1_cl_src21.gif
[Sat Apr  7 03:39:24 2012] Mean detx,y = (-4829.81, -669.04) 
[Sat Apr  7 03:39:27 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Apr  7 03:39:58 2012] Binned source spectrum to 10 counts/bin
[Sat Apr  7 03:39:58 2012] Setting source spectrum file to fullrun_pn_xmm0505720301_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Sat Apr  7 03:39:58 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505720301_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Sat Apr  7 13:31:41 2012] Updating aperture counts using extracted products
[Sat Apr  7 13:31:41 2012] Error reading totcts from fullrun_pn_xmm0505720301_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Sat Apr  7 13:31:48 2012] Calculating source flux in energy range 0.30-8.00
[Sat Apr  7 13:31:48 2012] Using photon index=1.80, rate=0.0965, arf fullrun_pn_xmm0505720301_pi300-10000_pass1_cl_src21.arf
[Sat Apr  7 13:31:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Apr  7 13:31:48 2012] Updating source flux to 3.6e-13