[Fri Apr  6 11:35:36 2012] Detection parameters:
  Position = (274.5, 280.6) = 0 43 1.05 41 13 50.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 126.5 +/- 16.4
  Background counts = 98.8
  Rate = 0.005 +/- 0.0006

[Fri Apr  6 11:35:37 2012] Off-axis axis estimate = 2.17'
[Fri Apr  6 11:38:09 2012] Using EEF radius (= 7.51 ")to estimate initial spatial extent for simple fitting
[Fri Apr  6 11:38:09 2012] Initial guess for spatial extent in simple fitting = 7.51"
[Fri Apr  6 11:38:09 2012] source mask rpix=1.7, npix_max = 19, mask sum = 14, frac = 0.706
[Fri Apr  6 11:38:09 2012] Giving source the simple spatial ID 114 for pass 0, mean size = 7.51"
[Fri Apr  6 20:26:37 2012] Vigneting correction estimate = 1.000000
[Fri Apr  6 20:26:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Apr  6 20:26:37 2012] Assessing source extent using major
[Fri Apr  6 20:26:37 2012] Source does appear to be extended
[Fri Apr  6 20:26:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Apr  6 20:27:23 2012] Using EEF radius (= 7.51 ")to estimate initial spatial extent for simple fitting
[Fri Apr  6 20:27:23 2012] Initial guess for spatial extent in simple fitting = 7.51"
[Fri Apr  6 20:27:23 2012] source mask rpix=1.7, npix_max = 19, mask sum = 14, frac = 0.706
[Fri Apr  6 20:27:23 2012] Giving source the simple spatial ID 85 for pass 1, mean size = 7.51"
[Fri Apr  6 23:19:29 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_src85.ximg exists
[Fri Apr  6 23:19:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_src85.csv
[Fri Apr  6 23:19:29 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_src85_1.ximg exists
[Fri Apr  6 23:19:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_src85.csv
[Fri Apr  6 23:19:29 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_src85_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_src85.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Apr  6 23:19:30 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src85.ximg exists
[Fri Apr  6 23:19:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src85.csv
[Fri Apr  6 23:19:30 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src85_1.ximg exists
[Fri Apr  6 23:19:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src85.csv
[Fri Apr  6 23:19:30 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src85_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src85.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Apr  7 03:24:48 2012] Source 122 is offset by 7.377670 and 6.221317 pixels which is larger than
2 X fitted extent = 0.863407 x 0.863407, not incorporating fit results
[Sat Apr  7 03:24:48 2012] Vigneting correction estimate = 1.000000
[Sat Apr  7 03:24:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Apr  7 03:24:48 2012] Assessing source extent using major
[Sat Apr  7 03:24:48 2012] Source does appear to be extended
[Sat Apr  7 03:24:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Apr  7 03:25:30 2012] XMMSAS src. selection expression = ellipse(23830.427277, 24363.376617, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Apr  7 03:25:30 2012] Writing source region out to fullrun_pn_xmm0505720301_pi300-10000_pass1_cl_src122_src.reg
[Sat Apr  7 03:25:30 2012] Extracting stamp from image fullrun_pn_xmm0505720301_pi300-10000_cl_sm2.00.img.gz, (237, 243) - (312, 318)
[Sat Apr  7 03:25:30 2012] XMMSAS bgd. selection expression = annulus(23830.427277, 24363.376617, 1087.500000, 2175.000000, X, Y) && !ellipse(24143.333099, 26983.144470, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23248.474060, 26920.647736, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25789.142092, 26444.785800, 394.046411, 394.046411, 0.000000, X, Y) && !ellipse(24499.274292, 26245.003845, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23400.923187, 26128.440094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21708.375500, 25479.082000, 449.832813, 449.832813, 0.000000, X, Y) && !ellipse(22124.616089, 22990.399902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24897.903046, 27018.846649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24833.215912, 25273.504730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25452.299713, 25005.936188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26130.351715, 24756.578491, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25967.784600, 23327.306400, 335.480010, 335.480010, 0.000000, X, Y)
[Sat Apr  7 03:25:30 2012] Writing fullrun_pn_xmm0505720301_pi300-10000_pass1_cl_src122.gif
[Sat Apr  7 04:46:27 2012] Mean detx,y = (-2478.85, 3681.36) 
[Sat Apr  7 04:46:30 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Apr  7 04:46:43 2012] Binned source spectrum to 10 counts/bin
[Sat Apr  7 04:46:43 2012] Setting source spectrum file to fullrun_pn_xmm0505720301_pi300-10000_pass1_cl_src122_src_b10.pi.gz
[Sat Apr  7 04:46:43 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505720301_pi300-10000_pass1_cl_src122_bgd.pi.gz
[Sat Apr  7 07:50:00 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Apr  7 07:50:00 2012] rmf not generated due to insufficient counts
[Sat Apr  7 13:31:47 2012] Updating aperture counts using extracted products
[Sat Apr  7 13:31:47 2012] Error reading totcts from fullrun_pn_xmm0505720301_pi300-10000_pass1_cl_src122_src_b10.pi.gz
[Sat Apr  7 13:31:53 2012] Calculating source flux in energy range 0.30-8.00
[Sat Apr  7 13:31:53 2012] Using photon index=1.80, rate=0.00499, arf fullrun_pn_xmm0505720301_pi300-10000_pass1_cl_src122.arf
[Sat Apr  7 13:31:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Apr  7 13:31:53 2012] Updating source flux to 4.6e-14
[Sat Apr  7 13:51:45 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting