[Fri Apr  6 11:35:32 2012] Detection parameters:
  Position = (352.3, 359.3) = 0 42 31.00 41 19 38.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1952.2 +/- 54.1
  Background counts = 62.6
  Rate = 0.1 +/- 0.003

[Fri Apr  6 11:35:37 2012] Off-axis axis estimate = 5.89'
[Fri Apr  6 11:38:09 2012] Using EEF radius (= 9.37 ")to estimate initial spatial extent for simple fitting
[Fri Apr  6 11:38:09 2012] Initial guess for spatial extent in simple fitting = 9.37"
[Fri Apr  6 11:38:09 2012] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.887
[Fri Apr  6 11:38:09 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 9.37"
[Fri Apr  6 15:40:00 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_src10.ximg exists
[Fri Apr  6 15:40:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_src10.csv
[Fri Apr  6 15:40:00 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_src10_1.ximg exists
[Fri Apr  6 15:40:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_src10.csv
[Fri Apr  6 15:40:00 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Apr  6 15:40:01 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Fri Apr  6 15:40:01 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Fri Apr  6 15:40:01 2012] Fit fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Fri Apr  6 20:26:37 2012] Spatial fit model total counts = 2541.670000, observed total counts = 2383.000000
[Fri Apr  6 20:26:37 2012] Offset between fit and detection position for source 11 = 0.186823 pixels
[Fri Apr  6 20:26:37 2012] 2509.950000 total counts/ 1180.880000 bgd. counts: snr = 38.676305
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.186823 pixels
  Position = (352.2, 359.4) = 0 42 31.05 41 19 37.7
  Extent = 5.1 (4.8-5.3)", rotation angle = 0
  Source counts = 1329.1 +/- 50.1
  Background counts = 1180.9
  Rate = 0.05 +/- 0.002
[Fri Apr  6 20:26:37 2012] Vigneting correction estimate = 1.000000
[Fri Apr  6 20:26:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Apr  6 20:26:37 2012] Assessing source extent using major axis lower bound
[Fri Apr  6 20:26:37 2012] Source does appear to be extended
[Fri Apr  6 20:26:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Apr  6 20:27:23 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Apr  6 20:27:23 2012] Initial guess for spatial extent in simple fitting = 5.11"
[Fri Apr  6 20:27:23 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.802
[Fri Apr  6 20:27:23 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 5.11"
[Fri Apr  6 23:19:28 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_src10.ximg exists
[Fri Apr  6 23:19:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_src10.csv
[Fri Apr  6 23:19:28 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_src10_1.ximg exists
[Fri Apr  6 23:19:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_src10.csv
[Fri Apr  6 23:19:28 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Apr  6 23:19:29 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Fri Apr  6 23:19:29 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Fri Apr  6 23:19:29 2012] Fit fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Sat Apr  7 03:24:48 2012] Spatial fit model total counts = 2540.060000, observed total counts = 2383.000000
[Sat Apr  7 03:24:48 2012] Offset between fit and detection position for source 11 = 0.003464 pixels
[Sat Apr  7 03:24:48 2012] 2507.690000 total counts/ 1183.720000 bgd. counts: snr = 38.481647
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.003464 pixels
  Position = (352.2, 359.4) = 0 42 31.05 41 19 37.7
  Extent = 5.1 (4.8-5.3)", rotation angle = 0
  Source counts = 1324.0 +/- 50.1
  Background counts = 1183.7
  Rate = 0.05 +/- 0.002
[Sat Apr  7 03:24:48 2012] Vigneting correction estimate = 1.000000
[Sat Apr  7 03:24:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Apr  7 03:24:48 2012] Assessing source extent using major axis lower bound
[Sat Apr  7 03:24:48 2012] Source does appear to be extended
[Sat Apr  7 03:24:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Apr  7 03:25:26 2012] Counts = 1323.970000, rescaling region sizes by 2.000000
[Sat Apr  7 03:25:26 2012] XMMSAS src. selection expression = ellipse(30591.790620, 31219.269000, 609.523218, 609.523218, 0.000000, X, Y)
[Sat Apr  7 03:25:26 2012] Writing source region out to fullrun_pn_xmm0505720301_pi300-10000_pass1_cl_src11_src.reg
[Sat Apr  7 03:25:26 2012] Extracting stamp from image fullrun_pn_xmm0505720301_pi300-10000_cl_sm2.00.img.gz, (317, 324) - (387, 394)
[Sat Apr  7 03:25:26 2012] XMMSAS bgd. selection expression = annulus(30591.790620, 31219.269000, 2031.744058, 4063.488117, X, Y) && !ellipse(28930.461940, 26922.650200, 1326.986438, 1326.986438, 0.000000, X, Y) && !ellipse(29697.224274, 31779.784119, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31760.413000, 30755.603800, 434.318412, 434.318412, 0.000000, X, Y) && !ellipse(34663.038378, 29980.583000, 448.335213, 448.335213, 0.000000, X, Y) && !ellipse(28569.997070, 30140.420349, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26548.309082, 29523.683594, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35384.608000, 28664.066000, 1667.816048, 1667.816048, 0.000000, X, Y) && !ellipse(27442.152808, 28722.972400, 742.076021, 742.076021, 0.000000, X, Y) && !ellipse(28097.574432, 28212.274353, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33884.796000, 28544.732000, 1626.528047, 1575.424045, 60.635000, X, Y) && !ellipse(25845.472382, 27778.007141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30620.234589, 27321.355377, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27008.907400, 27352.190200, 501.600014, 501.600014, 0.000000, X, Y) && !ellipse(27643.017400, 27031.223400, 546.408016, 387.357611, 46.781000, X, Y) && !ellipse(29958.607200, 33780.981000, 559.893616, 559.893616, 0.000000, X, Y) && !ellipse(28263.205780, 32943.217957, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34165.205811, 32282.901550, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27544.207916, 29973.166779, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29336.448273, 29249.339417, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28410.257233, 29090.929749, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26566.323456, 28920.949463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29041.360352, 28293.173096, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29106.923645, 27828.497833, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34946.668549, 27850.250488, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Apr  7 03:25:26 2012] Writing fullrun_pn_xmm0505720301_pi300-10000_pass1_cl_src11.gif
[Sat Apr  7 03:32:27 2012] Mean detx,y = (1292.35, -5178.54) 
[Sat Apr  7 03:32:29 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Apr  7 03:32:56 2012] Binned source spectrum to 10 counts/bin
[Sat Apr  7 03:32:56 2012] Setting source spectrum file to fullrun_pn_xmm0505720301_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sat Apr  7 03:32:56 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505720301_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Sat Apr  7 13:31:40 2012] Updating aperture counts using extracted products
[Sat Apr  7 13:31:41 2012] Error reading totcts from fullrun_pn_xmm0505720301_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sat Apr  7 13:31:47 2012] Calculating source flux in energy range 0.30-8.00
[Sat Apr  7 13:31:47 2012] Using photon index=1.80, rate=0.0523, arf fullrun_pn_xmm0505720301_pi300-10000_pass1_cl_src11.arf
[Sat Apr  7 13:31:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Apr  7 13:31:47 2012] Updating source flux to 1.7e-13