[Fri Apr  6 11:35:35 2012] Detection parameters:
  Position = (291.0, 323.2) = 0 42 54.67 41 17 0.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 115.1 +/- 19.1
  Background counts = 138.1
  Rate = 0.007 +/- 0.001

[Fri Apr  6 11:35:37 2012] Off-axis axis estimate = 1.87'
[Fri Apr  6 11:38:09 2012] Using EEF radius (= 7.36 ")to estimate initial spatial extent for simple fitting
[Fri Apr  6 11:38:09 2012] Initial guess for spatial extent in simple fitting = 7.36"
[Fri Apr  6 11:38:09 2012] source mask rpix=1.7, npix_max = 19, mask sum = 11, frac = 0.572
[Fri Apr  6 11:38:09 2012] Giving source the simple spatial ID 99 for pass 0, mean size = 7.36"
[Fri Apr  6 15:40:00 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_src99.ximg exists
[Fri Apr  6 15:40:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_src99.csv
[Fri Apr  6 15:40:00 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_src99_1.ximg exists
[Fri Apr  6 15:40:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_src99.csv
[Fri Apr  6 15:40:00 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_src99_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_src99.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Apr  6 15:40:02 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src99.ximg exists
[Fri Apr  6 15:40:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src99.csv
[Fri Apr  6 15:40:02 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src99_1.ximg exists
[Fri Apr  6 15:40:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src99.csv
[Fri Apr  6 15:40:02 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src99_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src99.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Apr  6 20:26:37 2012] Warning, spatial fit 99 centroid is now closest to src. 27
[Fri Apr  6 20:26:37 2012] Vigneting correction estimate = 1.000000
[Fri Apr  6 20:26:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Apr  6 20:26:37 2012] Assessing source extent using major
[Fri Apr  6 20:26:37 2012] Source does appear to be extended
[Fri Apr  6 20:26:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Apr  6 20:26:37 2012] Source is confused with source 27
[Fri Apr  6 20:27:23 2012] Using EEF radius (= 7.36 ")to estimate initial spatial extent for simple fitting
[Fri Apr  6 20:27:23 2012] Initial guess for spatial extent in simple fitting = 7.36"
[Fri Apr  6 20:27:23 2012] source mask rpix=1.7, npix_max = 19, mask sum = 11, frac = 0.572
[Fri Apr  6 20:27:23 2012] Giving source the simple spatial ID 74 for pass 1, mean size = 7.36"
[Fri Apr  6 23:19:29 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_src74.ximg exists
[Fri Apr  6 23:19:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_src74.csv
[Fri Apr  6 23:19:29 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_src74_1.ximg exists
[Fri Apr  6 23:19:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_src74.csv
[Fri Apr  6 23:19:29 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_src74_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_src74.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Apr  6 23:19:29 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src74.ximg exists
[Fri Apr  6 23:19:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src74.csv
[Fri Apr  6 23:19:29 2012] fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src74_1.ximg exists
[Fri Apr  6 23:19:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src74.csv
[Fri Apr  6 23:19:29 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src74_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src74.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Apr  7 03:24:48 2012] Warning, spatial fit 74 centroid is now closest to src. 102
[Sat Apr  7 03:24:48 2012] Vigneting correction estimate = 1.000000
[Sat Apr  7 03:24:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Apr  7 03:24:48 2012] Assessing source extent using major
[Sat Apr  7 03:24:48 2012] Source does appear to be extended
[Sat Apr  7 03:24:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Apr  7 03:25:30 2012] XMMSAS src. selection expression = ellipse(25270.108948, 28067.200897, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Apr  7 03:25:30 2012] Writing source region out to fullrun_pn_xmm0505720301_pi300-10000_pass1_cl_src106_src.reg
[Sat Apr  7 03:25:30 2012] Extracting stamp from image fullrun_pn_xmm0505720301_pi300-10000_cl_sm2.00.img.gz, (254, 286) - (329, 361)
[Sat Apr  7 03:25:30 2012] XMMSAS bgd. selection expression = annulus(25270.108948, 28067.200897, 1087.500000, 2175.000000, X, Y) && !ellipse(25158.857910, 29982.087677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26548.309082, 29523.683594, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23226.214800, 29344.041400, 415.885612, 415.885612, 0.000000, X, Y) && !ellipse(27442.152808, 28722.972400, 742.076021, 742.076021, 0.000000, X, Y) && !ellipse(28097.574432, 28212.274353, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25845.472382, 27778.007141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27008.907400, 27352.190200, 501.600014, 501.600014, 0.000000, X, Y) && !ellipse(27643.017400, 27031.223400, 546.408016, 387.357611, 46.781000, X, Y) && !ellipse(24143.333099, 26983.144470, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23248.474060, 26920.647736, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25789.142092, 26444.785800, 394.046411, 394.046411, 0.000000, X, Y) && !ellipse(24499.274292, 26245.003845, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26736.300400, 26138.524200, 568.360816, 568.360816, 0.000000, X, Y) && !ellipse(28144.030000, 25322.782000, 1219.832035, 1219.832035, 0.000000, X, Y) && !ellipse(23400.923187, 26128.440094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27544.207916, 29973.166779, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26566.323456, 28920.949463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25164.563568, 28550.408264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25076.931671, 27542.638794, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24897.903046, 27018.846649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24833.215912, 25273.504730, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Apr  7 03:25:30 2012] Writing fullrun_pn_xmm0505720301_pi300-10000_pass1_cl_src106.gif
[Sat Apr  7 04:41:10 2012] Mean detx,y = (-2372.52, -263.45) 
[Sat Apr  7 04:41:13 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Apr  7 04:41:26 2012] Binned source spectrum to 10 counts/bin
[Sat Apr  7 04:41:27 2012] Setting source spectrum file to fullrun_pn_xmm0505720301_pi300-10000_pass1_cl_src106_src_b10.pi.gz
[Sat Apr  7 04:41:27 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505720301_pi300-10000_pass1_cl_src106_bgd.pi.gz
[Sat Apr  7 07:47:53 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Apr  7 07:47:53 2012] rmf not generated due to insufficient counts
[Sat Apr  7 13:31:45 2012] Updating aperture counts using extracted products
[Sat Apr  7 13:31:46 2012] Error reading totcts from fullrun_pn_xmm0505720301_pi300-10000_pass1_cl_src106_src_b10.pi.gz
[Sat Apr  7 13:31:52 2012] Calculating source flux in energy range 0.30-8.00
[Sat Apr  7 13:31:52 2012] Using photon index=1.80, rate=0.00699, arf fullrun_pn_xmm0505720301_pi300-10000_pass1_cl_src106.arf
[Sat Apr  7 13:31:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Apr  7 13:31:53 2012] Updating source flux to 2.8e-14
[Sat Apr  7 13:51:45 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting