[Fri Apr  6 11:35:45 2012] Detection parameters:
  Position = (335.4, 323.6) = 0 42 37.56 41 17 5.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 75.6 +/- 15.0
  Background counts = 35.9
  Rate = 0.003 +/- 0.0006

[Fri Apr  6 11:35:45 2012] Off-axis axis estimate = 3.24'
[Fri Apr  6 18:15:08 2012] Using EEF radius (= 8.05 ")to estimate initial spatial extent for simple fitting
[Fri Apr  6 18:15:08 2012] Initial guess for spatial extent in simple fitting = 8.05"
[Fri Apr  6 18:15:08 2012] source mask rpix=1.9, npix_max = 22, mask sum = 24, frac = 1.086
[Fri Apr  6 18:15:08 2012] Giving source the simple spatial ID 78 for pass 0, mean size = 8.05"
[Fri Apr  6 20:26:21 2012] fullrun_mos2_xmm0505720301_pi300-10000_cl_pass0_src78.ximg exists
[Fri Apr  6 20:26:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720301_pi300-10000_cl_pass0_src78.csv
[Fri Apr  6 20:26:21 2012] fullrun_mos2_xmm0505720301_pi300-10000_cl_pass0_src78_1.ximg exists
[Fri Apr  6 20:26:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720301_pi300-10000_cl_pass0_src78.csv
[Fri Apr  6 20:26:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720301_pi300-10000_cl_pass0_src78_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720301_pi300-10000_cl_pass0_src78.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Apr  6 20:26:22 2012] fullrun_mos2_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src78.ximg exists
[Fri Apr  6 20:26:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src78.csv
[Fri Apr  6 20:26:22 2012] fullrun_mos2_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src78_1.ximg exists
[Fri Apr  6 20:26:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src78.csv
[Fri Apr  6 20:26:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src78_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src78.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Apr  6 20:27:03 2012] Warning, spatial fit 78 centroid is now closest to src. 54
[Fri Apr  6 20:27:03 2012] Vigneting correction estimate = 1.000000
[Fri Apr  6 20:27:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Apr  6 20:27:03 2012] Assessing source extent using major
[Fri Apr  6 20:27:03 2012] Source does appear to be extended
[Fri Apr  6 20:27:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Apr  7 01:31:00 2012] Using EEF radius (= 8.05 ")to estimate initial spatial extent for simple fitting
[Sat Apr  7 01:31:00 2012] Initial guess for spatial extent in simple fitting = 8.05"
[Sat Apr  7 01:31:00 2012] source mask rpix=1.9, npix_max = 22, mask sum = 24, frac = 1.086
[Sat Apr  7 01:31:00 2012] Giving source the simple spatial ID 75 for pass 1, mean size = 8.05"
[Sat Apr  7 03:24:35 2012] fullrun_mos2_xmm0505720301_pi300-10000_cl_pass1_src75.ximg exists
[Sat Apr  7 03:24:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720301_pi300-10000_cl_pass1_src75.csv
[Sat Apr  7 03:24:35 2012] fullrun_mos2_xmm0505720301_pi300-10000_cl_pass1_src75_1.ximg exists
[Sat Apr  7 03:24:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720301_pi300-10000_cl_pass1_src75.csv
[Sat Apr  7 03:24:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720301_pi300-10000_cl_pass1_src75_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720301_pi300-10000_cl_pass1_src75.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Apr  7 03:24:35 2012] fullrun_mos2_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src75.ximg exists
[Sat Apr  7 03:24:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src75.csv
[Sat Apr  7 03:24:35 2012] fullrun_mos2_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src75_1.ximg exists
[Sat Apr  7 03:24:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src75.csv
[Sat Apr  7 03:24:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src75_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src75.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Apr  7 03:25:06 2012] Warning: source 45 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 84 at 10.943944 pixels away
[Sat Apr  7 03:25:06 2012] Spatial fit model total counts = 1302.760000, observed total counts = 1146.000000
[Sat Apr  7 03:25:06 2012] Poor agreement between spatial fit and data for source 84
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Apr  7 03:25:07 2012] Vigneting correction estimate = 1.000000
[Sat Apr  7 03:25:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Apr  7 03:25:07 2012] Assessing source extent using major
[Sat Apr  7 03:25:07 2012] Source does appear to be extended
[Sat Apr  7 03:25:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Apr  7 10:22:04 2012] XMMSAS src. selection expression = ellipse(29127.839966, 28105.911224, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Apr  7 10:22:04 2012] Writing source region out to fullrun_mos2_xmm0505720301_pi300-10000_pass1_cl_src84_src.reg
[Sat Apr  7 10:22:04 2012] Extracting stamp from image fullrun_mos2_xmm0505720301_pi300-10000_cl_sm2.00.img.gz, (298, 286) - (373, 361)
[Sat Apr  7 10:22:04 2012] XMMSAS bgd. selection expression = annulus(29127.839966, 28105.911224, 1087.500000, 2175.000000, X, Y) && !ellipse(28918.310500, 26927.296400, 401.792012, 401.792012, 0.000000, X, Y) && !ellipse(26713.021400, 26141.086200, 536.592815, 536.592815, 0.000000, X, Y) && !ellipse(27632.007940, 27023.348800, 398.848811, 398.848811, 0.000000, X, Y) && !ellipse(27003.550180, 27353.060200, 568.692816, 348.936010, 76.145000, X, Y) && !ellipse(30596.316400, 27282.033600, 406.026412, 406.026412, 0.000000, X, Y) && !ellipse(27751.566400, 27491.606000, 259.223207, 259.223207, 0.000000, X, Y) && !ellipse(28583.043884, 30196.075073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27434.296960, 28718.009800, 780.501622, 780.501622, 0.000000, X, Y) && !ellipse(29967.901855, 27257.743530, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26153.466400, 27436.227875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27312.997345, 25311.368103, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29251.747528, 25100.996857, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28855.630432, 28742.218201, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30161.432251, 26225.428314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26127.178955, 29278.871307, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Apr  7 10:22:04 2012] Writing fullrun_mos2_xmm0505720301_pi300-10000_pass1_cl_src84.gif
[Sat Apr  7 10:47:05 2012] Mean detx,y = (-985.97, 1481.23) 
[Sat Apr  7 10:47:06 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Apr  7 10:47:15 2012] Binned source spectrum to 10 counts/bin
[Sat Apr  7 10:47:15 2012] Setting source spectrum file to fullrun_mos2_xmm0505720301_pi300-10000_pass1_cl_src84_src_b10.pi.gz
[Sat Apr  7 10:47:15 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505720301_pi300-10000_pass1_cl_src84_bgd.pi.gz
[Sat Apr  7 13:29:55 2012] Not generating rmf since there are only 75 counts
[Sat Apr  7 13:29:55 2012] rmf not generated due to insufficient counts
[Sat Apr  7 13:32:08 2012] Updating aperture counts using extracted products
[Sat Apr  7 13:32:08 2012] Error reading totcts from fullrun_mos2_xmm0505720301_pi300-10000_pass1_cl_src84_src_b10.pi.gz
[Sat Apr  7 13:32:11 2012] Calculating source flux in energy range 0.30-8.00
[Sat Apr  7 13:32:11 2012] Using photon index=1.80, rate=0.0032, arf fullrun_mos2_xmm0505720301_pi300-10000_pass1_cl_src84.arf
[Sat Apr  7 13:32:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Apr  7 13:32:11 2012] Updating source flux to 3.3e-14
[Sat Apr  7 13:45:27 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting