[Fri Apr  6 11:35:42 2012] Detection parameters:
  Position = (290.7, 310.0) = 0 42 54.79 41 16 3.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2760.0 +/- 63.5
  Background counts = 43.2
  Rate = 0.1 +/- 0.002

[Fri Apr  6 11:35:45 2012] Off-axis axis estimate = 1.01'
[Fri Apr  6 18:15:08 2012] Using EEF radius (= 6.93 ")to estimate initial spatial extent for simple fitting
[Fri Apr  6 18:15:08 2012] Initial guess for spatial extent in simple fitting = 6.93"
[Fri Apr  6 18:15:08 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.912
[Fri Apr  6 18:15:08 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 6.93"
[Fri Apr  6 20:26:20 2012] fullrun_mos2_xmm0505720301_pi300-10000_cl_pass0_src8.ximg exists
[Fri Apr  6 20:26:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720301_pi300-10000_cl_pass0_src8.csv
[Fri Apr  6 20:26:20 2012] fullrun_mos2_xmm0505720301_pi300-10000_cl_pass0_src8_1.ximg exists
[Fri Apr  6 20:26:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720301_pi300-10000_cl_pass0_src8.csv
[Fri Apr  6 20:26:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720301_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720301_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Apr  6 20:26:21 2012] fullrun_mos2_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Fri Apr  6 20:26:21 2012] fullrun_mos2_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Fri Apr  6 20:26:21 2012] Fit fullrun_mos2_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Fri Apr  6 20:27:03 2012] Warning, spatial fit 8 centroid is now closest to src. 16
[Fri Apr  6 20:27:03 2012] Spatial fit model total counts = 4922.470000, observed total counts = 4919.000000
[Fri Apr  6 20:27:03 2012] Offset between fit and detection position for source 7 = 0.150344 pixels
[Fri Apr  6 20:27:03 2012] Warning, changing simple spatial fit ID from 8 to 17
[Fri Apr  6 20:27:03 2012] 4994.110000 total counts/ 3566.640000 bgd. counts: snr = 23.902171
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.150344 pixels
  Position = (290.9, 310.0) = 0 42 54.73 41 16 2.9
  Extent = 4.1 (4.0-4.4)", rotation angle = 0
  Source counts = 1427.5 +/- 70.7
  Background counts = 3566.6
  Rate = 0.05 +/- 0.003
[Fri Apr  6 20:27:03 2012] Vigneting correction estimate = 1.000000
[Fri Apr  6 20:27:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Apr  6 20:27:03 2012] Assessing source extent using major axis lower bound
[Fri Apr  6 20:27:03 2012] Source does appear to be extended
[Fri Apr  6 20:27:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Apr  7 01:31:00 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Apr  7 01:31:00 2012] Initial guess for spatial extent in simple fitting = 4.14"
[Sat Apr  7 01:31:00 2012] source mask rpix=1.0, npix_max = 8, mask sum = 6, frac = 0.712
[Sat Apr  7 01:31:00 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 4.14"
[Sat Apr  7 03:24:34 2012] fullrun_mos2_xmm0505720301_pi300-10000_cl_pass1_src8.ximg exists
[Sat Apr  7 03:24:34 2012] fullrun_mos2_xmm0505720301_pi300-10000_cl_pass1_src8_1.ximg exists
[Sat Apr  7 03:24:34 2012] Fit fullrun_mos2_xmm0505720301_pi300-10000_cl_pass1_src8 appears to have run properly
[Sat Apr  7 03:24:35 2012] fullrun_mos2_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Sat Apr  7 03:24:35 2012] fullrun_mos2_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Sat Apr  7 03:24:35 2012] Fit fullrun_mos2_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Sat Apr  7 03:25:06 2012] Spatial fit model total counts = 4358.320000, observed total counts = 4347.000000
[Sat Apr  7 03:25:06 2012] Offset between fit and detection position for source 7 = 0.320373 pixels
[Sat Apr  7 03:25:06 2012] 3890.380000 total counts/ 2312.080000 bgd. counts: snr = 32.823745
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.320373 pixels
  Position = (290.6, 310.0) = 0 42 54.85 41 16 3.1
  Extent = 4.5 (4.3-4.7)", rotation angle = 0
  Source counts = 1578.3 +/- 62.4
  Background counts = 2312.1
  Rate = 0.06 +/- 0.002
[Sat Apr  7 03:25:06 2012] Vigneting correction estimate = 1.000000
[Sat Apr  7 03:25:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Apr  7 03:25:06 2012] Assessing source extent using major axis lower bound
[Sat Apr  7 03:25:06 2012] Source does appear to be extended
[Sat Apr  7 03:25:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Apr  7 10:22:01 2012] Counts = 1578.300000, rescaling region sizes by 2.000000
[Sat Apr  7 10:22:01 2012] XMMSAS src. selection expression = ellipse(25229.671400, 26925.235800, 540.877216, 540.877216, 0.000000, X, Y)
[Sat Apr  7 10:22:01 2012] Writing source region out to fullrun_mos2_xmm0505720301_pi300-10000_pass1_cl_src7_src.reg
[Sat Apr  7 10:22:01 2012] Extracting stamp from image fullrun_mos2_xmm0505720301_pi300-10000_cl_sm2.00.img.gz, (259, 279) - (322, 341)
[Sat Apr  7 10:22:01 2012] XMMSAS bgd. selection expression = annulus(25229.671400, 26925.235800, 1802.924052, 3605.848104, X, Y) && !ellipse(28918.310500, 26927.296400, 401.792012, 401.792012, 0.000000, X, Y) && !ellipse(26713.021400, 26141.086200, 536.592815, 536.592815, 0.000000, X, Y) && !ellipse(21693.805800, 25493.704200, 375.714411, 375.714411, 0.000000, X, Y) && !ellipse(27632.007940, 27023.348800, 398.848811, 398.848811, 0.000000, X, Y) && !ellipse(23387.758000, 26175.875200, 454.039213, 454.039213, 0.000000, X, Y) && !ellipse(27003.550180, 27353.060200, 568.692816, 348.936010, 76.145000, X, Y) && !ellipse(25775.576620, 30345.216200, 389.848011, 389.848011, 0.000000, X, Y) && !ellipse(23220.605200, 29360.484000, 403.436012, 403.436012, 0.000000, X, Y) && !ellipse(25773.025200, 26450.841400, 273.286408, 273.286408, 0.000000, X, Y) && !ellipse(24161.187200, 30846.150000, 373.837611, 373.837611, 0.000000, X, Y) && !ellipse(27751.566400, 27491.606000, 259.223207, 259.223207, 0.000000, X, Y) && !ellipse(24126.060900, 26973.925600, 325.635209, 323.750409, 258.741102, X, Y) && !ellipse(28583.043884, 30196.075073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28114.621689, 25326.418462, 511.519965, 346.952228, 54.256311, X, Y) && !ellipse(28703.440000, 25030.359400, 314.052809, 314.052809, 0.000000, X, Y) && !ellipse(25798.817980, 27835.052800, 279.856808, 279.856808, 0.000000, X, Y) && !ellipse(27434.296960, 28718.009800, 780.501622, 780.501622, 0.000000, X, Y) && !ellipse(26535.298000, 29595.112000, 342.108810, 342.108810, 0.000000, X, Y) && !ellipse(25136.691071, 29961.495270, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28454.111400, 23801.891600, 347.144042, 347.144042, 0.000000, X, Y) && !ellipse(22142.429960, 23029.420000, 330.663210, 330.663210, 0.000000, X, Y) && !ellipse(24479.289886, 26240.715973, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26153.466400, 27436.227875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27451.826172, 24622.311005, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27312.997345, 25311.368103, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29251.747528, 25100.996857, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28855.630432, 28742.218201, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23081.987793, 26842.218170, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29127.839966, 28105.911224, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26127.178955, 29278.871307, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Apr  7 10:22:01 2012] Writing fullrun_mos2_xmm0505720301_pi300-10000_pass1_cl_src7.gif
[Sat Apr  7 10:26:55 2012] Mean detx,y = (2194.15, -960.90) 
[Sat Apr  7 10:26:57 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Apr  7 10:27:10 2012] Binned source spectrum to 10 counts/bin
[Sat Apr  7 10:27:11 2012] Setting source spectrum file to fullrun_mos2_xmm0505720301_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sat Apr  7 10:27:11 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505720301_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Sat Apr  7 13:32:04 2012] Updating aperture counts using extracted products
[Sat Apr  7 13:32:05 2012] Error reading totcts from fullrun_mos2_xmm0505720301_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sat Apr  7 13:32:08 2012] Calculating source flux in energy range 0.30-8.00
[Sat Apr  7 13:32:08 2012] Using photon index=1.80, rate=0.0587, arf fullrun_mos2_xmm0505720301_pi300-10000_pass1_cl_src7.arf
[Sat Apr  7 13:32:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Apr  7 13:32:08 2012] Updating source flux to 6.1e-13