[Fri Apr  6 11:35:44 2012] Detection parameters:
  Position = (367.8, 277.0) = 0 42 25.06 41 13 39.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 176.5 +/- 18.5
  Background counts = 31.0
  Rate = 0.008 +/- 0.0008

[Fri Apr  6 11:35:45 2012] Off-axis axis estimate = 5.26'
[Fri Apr  6 18:15:08 2012] Using EEF radius (= 9.06 ")to estimate initial spatial extent for simple fitting
[Fri Apr  6 18:15:08 2012] Initial guess for spatial extent in simple fitting = 9.06"
[Fri Apr  6 18:15:08 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.124
[Fri Apr  6 18:15:08 2012] Giving source the simple spatial ID 58 for pass 0, mean size = 9.06"
[Fri Apr  6 20:26:20 2012] fullrun_mos2_xmm0505720301_pi300-10000_cl_pass0_src58.ximg exists
[Fri Apr  6 20:26:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720301_pi300-10000_cl_pass0_src58.csv
[Fri Apr  6 20:26:20 2012] fullrun_mos2_xmm0505720301_pi300-10000_cl_pass0_src58_1.ximg exists
[Fri Apr  6 20:26:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720301_pi300-10000_cl_pass0_src58.csv
[Fri Apr  6 20:26:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720301_pi300-10000_cl_pass0_src58_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720301_pi300-10000_cl_pass0_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Apr  6 20:26:21 2012] fullrun_mos2_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src58.ximg exists
[Fri Apr  6 20:26:21 2012] fullrun_mos2_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src58_1.ximg exists
[Fri Apr  6 20:26:21 2012] Fit fullrun_mos2_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src58 appears to have run properly
[Fri Apr  6 20:27:03 2012] Source 63 is offset by -0.532821 and 8.680833 pixels which is larger than
2 X fitted extent = 1.042147 x 1.042147, not incorporating fit results
[Fri Apr  6 20:27:03 2012] Warning, spatial fit 58 centroid is now closest to src. 62
[Fri Apr  6 20:27:03 2012] Vigneting correction estimate = 1.000000
[Fri Apr  6 20:27:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Apr  6 20:27:03 2012] Assessing source extent using major
[Fri Apr  6 20:27:03 2012] Source does appear to be extended
[Fri Apr  6 20:27:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Apr  6 20:27:03 2012] Source is confused with source 38
[Sat Apr  7 01:31:00 2012] Using EEF radius (= 9.06 ")to estimate initial spatial extent for simple fitting
[Sat Apr  7 01:31:00 2012] Initial guess for spatial extent in simple fitting = 9.06"
[Sat Apr  7 01:31:00 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.124
[Sat Apr  7 01:31:00 2012] Giving source the simple spatial ID 58 for pass 1, mean size = 9.06"
[Sat Apr  7 03:24:34 2012] fullrun_mos2_xmm0505720301_pi300-10000_cl_pass1_src58.ximg exists
[Sat Apr  7 03:24:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720301_pi300-10000_cl_pass1_src58.csv
[Sat Apr  7 03:24:34 2012] fullrun_mos2_xmm0505720301_pi300-10000_cl_pass1_src58_1.ximg exists
[Sat Apr  7 03:24:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720301_pi300-10000_cl_pass1_src58.csv
[Sat Apr  7 03:24:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720301_pi300-10000_cl_pass1_src58_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720301_pi300-10000_cl_pass1_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Apr  7 03:24:35 2012] fullrun_mos2_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src58.ximg exists
[Sat Apr  7 03:24:35 2012] fullrun_mos2_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src58_1.ximg exists
[Sat Apr  7 03:24:35 2012] Fit fullrun_mos2_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src58 appears to have run properly
[Sat Apr  7 03:25:06 2012] Spatial fit model total counts = 1049.160000, observed total counts = 1049.000000
[Sat Apr  7 03:25:06 2012] Offset between fit and detection position for source 63 = 6.793565 pixels
[Sat Apr  7 03:25:06 2012] 1053.821000 total counts/ 760.533000 bgd. counts: snr = 10.634945
Spatial fit parameters:
  Offset between fit and detection position for source 63 = 6.793565 pixels
  Position = (362.4, 273.0) = 0 42 27.17 41 13 21.6
  Extent = 18.1 (18.0-36.2)", rotation angle = 0
  Source counts = 293.3 +/- 32.5
  Background counts = 760.5
  Rate = 0.01 +/- 0.001
[Sat Apr  7 03:25:07 2012] Vigneting correction estimate = 1.000000
[Sat Apr  7 03:25:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Apr  7 03:25:07 2012] Assessing source extent using major axis lower bound
[Sat Apr  7 03:25:07 2012] Source does appear to be extended
[Sat Apr  7 03:25:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Apr  7 10:22:03 2012] XMMSAS src. selection expression = ellipse(31476.134000, 23699.468000, 1087.236031, 1087.236031, 0.000000, X, Y)
[Sat Apr  7 10:22:03 2012] Writing source region out to fullrun_mos2_xmm0505720301_pi300-10000_pass1_cl_src63_src.reg
[Sat Apr  7 10:22:03 2012] Extracting stamp from image fullrun_mos2_xmm0505720301_pi300-10000_cl_sm2.00.img.gz, (300, 210) - (425, 335)
[Sat Apr  7 10:22:03 2012] XMMSAS bgd. selection expression = annulus(31476.134000, 23699.468000, 1812.060052, 3624.120104, X, Y) && !ellipse(28918.310500, 26927.296400, 401.792012, 401.792012, 0.000000, X, Y) && !ellipse(27632.007940, 27023.348800, 398.848811, 398.848811, 0.000000, X, Y) && !ellipse(30374.727003, 23536.206678, 439.560347, 396.402882, 351.208612, X, Y) && !ellipse(30596.316400, 27282.033600, 406.026412, 406.026412, 0.000000, X, Y) && !ellipse(31241.432889, 22516.383255, 400.043377, 381.684254, 332.412784, X, Y) && !ellipse(33492.351600, 22543.331200, 453.140013, 453.140013, 0.000000, X, Y) && !ellipse(32446.540800, 26352.800400, 331.249610, 331.249610, 0.000000, X, Y) && !ellipse(33484.411600, 24695.234600, 518.446415, 518.446415, 229.624000, X, Y) && !ellipse(27511.654100, 21622.988000, 376.712011, 376.712011, 0.000000, X, Y) && !ellipse(27751.566400, 27491.606000, 259.223207, 259.223207, 0.000000, X, Y) && !ellipse(32790.689178, 26854.473785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28114.621689, 25326.418462, 511.519965, 346.952228, 54.256311, X, Y) && !ellipse(32569.026780, 23944.936000, 283.213608, 283.213608, 0.000000, X, Y) && !ellipse(28703.440000, 25030.359400, 314.052809, 314.052809, 0.000000, X, Y) && !ellipse(32399.438080, 24599.169400, 306.623209, 306.623209, 0.000000, X, Y) && !ellipse(29967.901855, 27257.743530, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34987.278800, 20667.854600, 386.538411, 386.538411, 0.000000, X, Y) && !ellipse(28454.111400, 23801.891600, 347.144042, 347.144042, 0.000000, X, Y) && !ellipse(34227.152954, 22749.421478, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27451.826172, 24622.311005, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27312.997345, 25311.368103, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34957.479828, 27826.023346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29251.747528, 25100.996857, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33781.899231, 25855.657074, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35337.823395, 25891.786713, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30161.432251, 26225.428314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29127.839966, 28105.911224, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35137.416800, 23020.101800, 787.451223, 787.451223, 0.000000, X, Y)
[Sat Apr  7 10:22:03 2012] Writing fullrun_mos2_xmm0505720301_pi300-10000_pass1_cl_src63.gif
[Sat Apr  7 10:40:59 2012] Mean detx,y = (-4534.78, -1770.18) 
[Sat Apr  7 10:41:00 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Apr  7 10:41:24 2012] Binned source spectrum to 10 counts/bin
[Sat Apr  7 10:41:25 2012] Setting source spectrum file to fullrun_mos2_xmm0505720301_pi300-10000_pass1_cl_src63_src_b10.pi.gz
[Sat Apr  7 10:41:25 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505720301_pi300-10000_pass1_cl_src63_bgd.pi.gz
[Sat Apr  7 13:32:07 2012] Updating aperture counts using extracted products
[Sat Apr  7 13:32:07 2012] Error reading totcts from fullrun_mos2_xmm0505720301_pi300-10000_pass1_cl_src63_src_b10.pi.gz
[Sat Apr  7 13:32:10 2012] Calculating source flux in energy range 0.30-8.00
[Sat Apr  7 13:32:10 2012] Using photon index=1.80, rate=0.0109, arf fullrun_mos2_xmm0505720301_pi300-10000_pass1_cl_src63.arf
[Sat Apr  7 13:32:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Apr  7 13:32:10 2012] Updating source flux to 1.2e-13
[Sat Apr  7 13:45:27 2012] Flag b found in src. 63 procflags, skipping spectral fitting
[Sat Apr  7 13:45:27 2012] Flag c found in src. 63 procflags, skipping spectral fitting