[Fri Apr  6 11:35:43 2012] Detection parameters:
  Position = (365.4, 446.4) = 0 42 25.92 41 25 52.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 140.2 +/- 15.8
  Background counts = 12.4
  Rate = 0.005 +/- 0.0006

[Fri Apr  6 11:35:45 2012] Off-axis axis estimate = 11.77'
[Fri Apr  6 18:15:08 2012] Using EEF radius (= 12.31 ")to estimate initial spatial extent for simple fitting
[Fri Apr  6 18:15:08 2012] Initial guess for spatial extent in simple fitting = 12.31"
[Fri Apr  6 18:15:08 2012] source mask rpix=2.8, npix_max = 44, mask sum = 38, frac = 0.856
[Fri Apr  6 18:15:08 2012] Giving source the simple spatial ID 64 for pass 0, mean size = 12.31"
[Fri Apr  6 20:26:20 2012] fullrun_mos2_xmm0505720301_pi300-10000_cl_pass0_src64.ximg exists
[Fri Apr  6 20:26:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720301_pi300-10000_cl_pass0_src64.csv
[Fri Apr  6 20:26:20 2012] fullrun_mos2_xmm0505720301_pi300-10000_cl_pass0_src64_1.ximg exists
[Fri Apr  6 20:26:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720301_pi300-10000_cl_pass0_src64.csv
[Fri Apr  6 20:26:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720301_pi300-10000_cl_pass0_src64_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720301_pi300-10000_cl_pass0_src64.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Apr  6 20:26:21 2012] fullrun_mos2_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src64.ximg exists
[Fri Apr  6 20:26:21 2012] fullrun_mos2_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src64_1.ximg exists
[Fri Apr  6 20:26:21 2012] Fit fullrun_mos2_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src64 appears to have run properly
[Fri Apr  6 20:27:03 2012] Warning, spatial fit 64 centroid is now closest to src. 73
[Fri Apr  6 20:27:03 2012] Vigneting correction estimate = 1.000000
[Fri Apr  6 20:27:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Apr  6 20:27:03 2012] Assessing source extent using major
[Fri Apr  6 20:27:03 2012] Source does appear to be extended
[Fri Apr  6 20:27:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Apr  7 01:31:00 2012] Using EEF radius (= 12.31 ")to estimate initial spatial extent for simple fitting
[Sat Apr  7 01:31:00 2012] Initial guess for spatial extent in simple fitting = 12.31"
[Sat Apr  7 01:31:00 2012] source mask rpix=2.8, npix_max = 44, mask sum = 38, frac = 0.856
[Sat Apr  7 01:31:00 2012] Giving source the simple spatial ID 64 for pass 1, mean size = 12.31"
[Sat Apr  7 03:24:34 2012] fullrun_mos2_xmm0505720301_pi300-10000_cl_pass1_src64.ximg exists
[Sat Apr  7 03:24:34 2012] fullrun_mos2_xmm0505720301_pi300-10000_cl_pass1_src64_1.ximg exists
[Sat Apr  7 03:24:34 2012] Fit fullrun_mos2_xmm0505720301_pi300-10000_cl_pass1_src64 appears to have run properly
[Sat Apr  7 03:24:35 2012] fullrun_mos2_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src64.ximg exists
[Sat Apr  7 03:24:35 2012] fullrun_mos2_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src64_1.ximg exists
[Sat Apr  7 03:24:35 2012] Fit fullrun_mos2_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src64 appears to have run properly
[Sat Apr  7 03:25:06 2012] Spatial fit model total counts = 232.991000, observed total counts = 211.000000
[Sat Apr  7 03:25:06 2012] Poor agreement between spatial fit and data for source 43
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Apr  7 03:25:07 2012] Vigneting correction estimate = 1.000000
[Sat Apr  7 03:25:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Apr  7 03:25:07 2012] Assessing source extent using major
[Sat Apr  7 03:25:07 2012] Source does appear to be extended
[Sat Apr  7 03:25:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Apr  7 10:22:04 2012] XMMSAS src. selection expression = ellipse(31738.617889, 38784.324890, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Apr  7 10:22:04 2012] Writing source region out to fullrun_mos2_xmm0505720301_pi300-10000_pass1_cl_src43_src.reg
[Sat Apr  7 10:22:04 2012] Extracting stamp from image fullrun_mos2_xmm0505720301_pi300-10000_cl_sm2.00.img.gz, (328, 409) - (403, 484)
[Sat Apr  7 10:22:04 2012] XMMSAS bgd. selection expression = annulus(31738.617889, 38784.324890, 1087.500000, 2175.000000, X, Y) && !ellipse(32101.969000, 36505.493800, 550.484016, 550.484016, 0.000000, X, Y)
[Sat Apr  7 10:22:04 2012] Writing fullrun_mos2_xmm0505720301_pi300-10000_pass1_cl_src43.gif
[Sat Apr  7 10:43:35 2012] Mean detx,y = (732.67, 12425.32) 
[Sat Apr  7 10:43:36 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Apr  7 10:43:50 2012] Binned source spectrum to 10 counts/bin
[Sat Apr  7 10:43:50 2012] Setting source spectrum file to fullrun_mos2_xmm0505720301_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Sat Apr  7 10:43:50 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505720301_pi300-10000_pass1_cl_src43_bgd.pi.gz
[Sat Apr  7 13:24:41 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Apr  7 13:24:41 2012] rmf not generated due to insufficient counts
[Sat Apr  7 13:32:07 2012] Updating aperture counts using extracted products
[Sat Apr  7 13:32:07 2012] Error reading totcts from fullrun_mos2_xmm0505720301_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Sat Apr  7 13:32:11 2012] Calculating source flux in energy range 0.30-8.00
[Sat Apr  7 13:32:11 2012] Using photon index=1.80, rate=0.00522, arf fullrun_mos2_xmm0505720301_pi300-10000_pass1_cl_src43.arf
[Sat Apr  7 13:32:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Apr  7 13:32:11 2012] Updating source flux to 1.3e-13
[Sat Apr  7 13:45:27 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting