[Fri Apr  6 11:35:43 2012] Detection parameters:
  Position = (404.0, 150.1) = 0 42 11.20 41 4 26.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 226.6 +/- 18.8
  Background counts = 9.0
  Rate = 0.008 +/- 0.0007

[Fri Apr  6 11:35:45 2012] Off-axis axis estimate = 13.20'
[Fri Apr  6 18:15:08 2012] Using EEF radius (= 13.03 ")to estimate initial spatial extent for simple fitting
[Fri Apr  6 18:15:08 2012] Initial guess for spatial extent in simple fitting = 13.03"
[Fri Apr  6 18:15:08 2012] source mask rpix=3.0, npix_max = 48, mask sum = 42, frac = 0.860
[Fri Apr  6 18:15:08 2012] Giving source the simple spatial ID 55 for pass 0, mean size = 13.03"
[Fri Apr  6 20:26:20 2012] fullrun_mos2_xmm0505720301_pi300-10000_cl_pass0_src55.ximg exists
[Fri Apr  6 20:26:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720301_pi300-10000_cl_pass0_src55.csv
[Fri Apr  6 20:26:20 2012] fullrun_mos2_xmm0505720301_pi300-10000_cl_pass0_src55_1.ximg exists
[Fri Apr  6 20:26:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720301_pi300-10000_cl_pass0_src55.csv
[Fri Apr  6 20:26:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720301_pi300-10000_cl_pass0_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720301_pi300-10000_cl_pass0_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Apr  6 20:26:21 2012] fullrun_mos2_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src55.ximg exists
[Fri Apr  6 20:26:21 2012] fullrun_mos2_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src55_1.ximg exists
[Fri Apr  6 20:26:21 2012] Fit fullrun_mos2_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src55 appears to have run properly
[Fri Apr  6 20:27:03 2012] Warning: source 55 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 32 at 16.309879 pixels away
[Fri Apr  6 20:27:03 2012] Vigneting correction estimate = 1.000000
[Fri Apr  6 20:27:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Apr  6 20:27:03 2012] Assessing source extent using major
[Fri Apr  6 20:27:03 2012] Source does appear to be extended
[Fri Apr  6 20:27:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Apr  6 20:27:03 2012] Source is confused with source 59
[Sat Apr  7 01:31:00 2012] Using EEF radius (= 13.03 ")to estimate initial spatial extent for simple fitting
[Sat Apr  7 01:31:00 2012] Initial guess for spatial extent in simple fitting = 13.03"
[Sat Apr  7 01:31:00 2012] source mask rpix=3.0, npix_max = 48, mask sum = 42, frac = 0.860
[Sat Apr  7 01:31:00 2012] Giving source the simple spatial ID 55 for pass 1, mean size = 13.03"
[Sat Apr  7 03:24:34 2012] fullrun_mos2_xmm0505720301_pi300-10000_cl_pass1_src55.ximg exists
[Sat Apr  7 03:24:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720301_pi300-10000_cl_pass1_src55.csv
[Sat Apr  7 03:24:34 2012] fullrun_mos2_xmm0505720301_pi300-10000_cl_pass1_src55_1.ximg exists
[Sat Apr  7 03:24:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720301_pi300-10000_cl_pass1_src55.csv
[Sat Apr  7 03:24:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720301_pi300-10000_cl_pass1_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720301_pi300-10000_cl_pass1_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Apr  7 03:24:35 2012] fullrun_mos2_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src55.ximg exists
[Sat Apr  7 03:24:35 2012] fullrun_mos2_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src55_1.ximg exists
[Sat Apr  7 03:24:35 2012] Fit fullrun_mos2_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src55 appears to have run properly
[Sat Apr  7 03:25:06 2012] Warning, spatial fit 55 centroid is now closest to src. 59
[Sat Apr  7 03:25:06 2012] Spatial fit model total counts = 384.970000, observed total counts = 367.000000
[Sat Apr  7 03:25:06 2012] Offset between fit and detection position for source 32 = 0.469221 pixels
[Sat Apr  7 03:25:06 2012] Warning, changing simple spatial fit ID from 55 to 67
[Sat Apr  7 03:25:06 2012] 396.909000 total counts/ 251.163000 bgd. counts: snr = 9.196420
Spatial fit parameters:
  Offset between fit and detection position for source 32 = 0.469221 pixels
  Position = (403.8, 149.7) = 0 42 11.28 41 4 25.0
  Extent = 8.0" x 3.6", rotation angle = 315
  Source counts = 145.7 +/- 19.9
  Background counts = 251.2
  Rate = 0.005 +/- 0.0007
[Sat Apr  7 03:25:07 2012] Vigneting correction estimate = 1.000000
[Sat Apr  7 03:25:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Apr  7 03:25:07 2012] Assessing source extent using major
[Sat Apr  7 03:25:07 2012] Source does appear to be extended
[Sat Apr  7 03:25:07 2012] Computing asymmetry using major and minor axis, asym = 2.20
[Sat Apr  7 03:25:07 2012] Source is asymmetric
[Sat Apr  7 10:22:03 2012] XMMSAS src. selection expression = ellipse(35081.116000, 12972.530000, 479.157614, 217.519806, 315.182000, X, Y)
[Sat Apr  7 10:22:03 2012] Writing source region out to fullrun_mos2_xmm0505720301_pi300-10000_pass1_cl_src32_src.reg
[Sat Apr  7 10:22:03 2012] Extracting stamp from image fullrun_mos2_xmm0505720301_pi300-10000_cl_sm2.00.img.gz, (376, 122) - (431, 177)
[Sat Apr  7 10:22:03 2012] XMMSAS bgd. selection expression = annulus(35081.116000, 12972.530000, 798.596023, 1597.192046, X, Y) && !ellipse(35543.341685, 13142.757891, 1223.008035, 417.901559, 344.804258, X, Y)
[Sat Apr  7 10:22:03 2012] Writing fullrun_mos2_xmm0505720301_pi300-10000_pass1_cl_src32.gif
[Sat Apr  7 10:40:05 2012] Mean detx,y = (-12212.17, -10083.41) 
[Sat Apr  7 10:40:06 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Apr  7 10:40:15 2012] Binned source spectrum to 10 counts/bin
[Sat Apr  7 10:40:15 2012] Setting source spectrum file to fullrun_mos2_xmm0505720301_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Sat Apr  7 10:40:15 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505720301_pi300-10000_pass1_cl_src32_bgd.pi.gz
[Sat Apr  7 13:32:06 2012] Updating aperture counts using extracted products
[Sat Apr  7 13:32:06 2012] Error reading totcts from fullrun_mos2_xmm0505720301_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Sat Apr  7 13:32:10 2012] Calculating source flux in energy range 0.30-8.00
[Sat Apr  7 13:32:10 2012] Using photon index=1.80, rate=0.00542, arf fullrun_mos2_xmm0505720301_pi300-10000_pass1_cl_src32.arf
[Sat Apr  7 13:32:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Apr  7 13:32:10 2012] Updating source flux to 1.7e-13
[Sat Apr  7 13:45:27 2012] Flag c found in src. 32 procflags, skipping spectral fitting