[Fri Apr  6 11:35:43 2012] Detection parameters:
  Position = (225.7, 278.5) = 0 43 19.86 41 13 47.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1066.4 +/- 38.0
  Background counts = 16.7
  Rate = 0.07 +/- 0.002

[Fri Apr  6 11:35:45 2012] Off-axis axis estimate = 5.47'
[Fri Apr  6 18:15:08 2012] Using EEF radius (= 9.16 ")to estimate initial spatial extent for simple fitting
[Fri Apr  6 18:15:08 2012] Initial guess for spatial extent in simple fitting = 9.16"
[Fri Apr  6 18:15:08 2012] source mask rpix=2.1, npix_max = 27, mask sum = 16, frac = 0.589
[Fri Apr  6 18:15:08 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 9.16"
[Fri Apr  6 20:26:20 2012] fullrun_mos2_xmm0505720301_pi300-10000_cl_pass0_src16.ximg exists
[Fri Apr  6 20:26:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720301_pi300-10000_cl_pass0_src16.csv
[Fri Apr  6 20:26:20 2012] fullrun_mos2_xmm0505720301_pi300-10000_cl_pass0_src16_1.ximg exists
[Fri Apr  6 20:26:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720301_pi300-10000_cl_pass0_src16.csv
[Fri Apr  6 20:26:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720301_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720301_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Apr  6 20:26:21 2012] fullrun_mos2_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Fri Apr  6 20:26:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src16.csv
[Fri Apr  6 20:26:21 2012] fullrun_mos2_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Fri Apr  6 20:26:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src16.csv
[Fri Apr  6 20:26:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Apr  6 20:27:03 2012] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 11.804150 pixels away
[Fri Apr  6 20:27:03 2012] Vigneting correction estimate = 1.000000
[Fri Apr  6 20:27:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Apr  6 20:27:03 2012] Assessing source extent using major
[Fri Apr  6 20:27:03 2012] Source does appear to be extended
[Fri Apr  6 20:27:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Apr  7 01:31:00 2012] Using EEF radius (= 9.16 ")to estimate initial spatial extent for simple fitting
[Sat Apr  7 01:31:00 2012] Initial guess for spatial extent in simple fitting = 9.16"
[Sat Apr  7 01:31:00 2012] source mask rpix=2.1, npix_max = 27, mask sum = 16, frac = 0.589
[Sat Apr  7 01:31:00 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 9.16"
[Sat Apr  7 03:24:34 2012] fullrun_mos2_xmm0505720301_pi300-10000_cl_pass1_src16.ximg exists
[Sat Apr  7 03:24:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720301_pi300-10000_cl_pass1_src16.csv
[Sat Apr  7 03:24:34 2012] fullrun_mos2_xmm0505720301_pi300-10000_cl_pass1_src16_1.ximg exists
[Sat Apr  7 03:24:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720301_pi300-10000_cl_pass1_src16.csv
[Sat Apr  7 03:24:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720301_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720301_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Apr  7 03:24:35 2012] fullrun_mos2_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Sat Apr  7 03:24:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src16.csv
[Sat Apr  7 03:24:35 2012] fullrun_mos2_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Sat Apr  7 03:24:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src16.csv
[Sat Apr  7 03:24:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Apr  7 03:25:06 2012] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 12.482745 pixels away
[Sat Apr  7 03:25:06 2012] Vigneting correction estimate = 1.000000
[Sat Apr  7 03:25:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Apr  7 03:25:06 2012] Assessing source extent using major
[Sat Apr  7 03:25:06 2012] Source does appear to be extended
[Sat Apr  7 03:25:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Apr  7 10:22:02 2012] Counts = 1066.413696, rescaling region sizes by 2.000000
[Sat Apr  7 10:22:02 2012] XMMSAS src. selection expression = ellipse(19586.343033, 24181.955811, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sat Apr  7 10:22:02 2012] Writing source region out to fullrun_mos2_xmm0505720301_pi300-10000_pass1_cl_src20_src.reg
[Sat Apr  7 10:22:02 2012] Extracting stamp from image fullrun_mos2_xmm0505720301_pi300-10000_cl_sm2.00.img.gz, (151, 204) - (301, 354)
[Sat Apr  7 10:22:02 2012] XMMSAS bgd. selection expression = annulus(19586.343033, 24181.955811, 4350.000000, 8700.000000, X, Y) && !ellipse(26713.021400, 26141.086200, 536.592815, 536.592815, 0.000000, X, Y) && !ellipse(21693.805800, 25493.704200, 375.714411, 375.714411, 0.000000, X, Y) && !ellipse(20808.069366, 16480.452591, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27632.007940, 27023.348800, 398.848811, 398.848811, 0.000000, X, Y) && !ellipse(23387.758000, 26175.875200, 454.039213, 454.039213, 0.000000, X, Y) && !ellipse(27003.550180, 27353.060200, 568.692816, 348.936010, 76.145000, X, Y) && !ellipse(25229.671400, 26925.235800, 360.584810, 360.584810, 0.000000, X, Y) && !ellipse(25775.576620, 30345.216200, 389.848011, 389.848011, 0.000000, X, Y) && !ellipse(23220.605200, 29360.484000, 403.436012, 403.436012, 0.000000, X, Y) && !ellipse(25773.025200, 26450.841400, 273.286408, 273.286408, 0.000000, X, Y) && !ellipse(24161.187200, 30846.150000, 373.837611, 373.837611, 0.000000, X, Y) && !ellipse(27511.654100, 21622.988000, 376.712011, 376.712011, 0.000000, X, Y) && !ellipse(27751.566400, 27491.606000, 259.223207, 259.223207, 0.000000, X, Y) && !ellipse(24126.060900, 26973.925600, 325.635209, 323.750409, 258.741102, X, Y) && !ellipse(28583.043884, 30196.075073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28114.621689, 25326.418462, 511.519965, 346.952228, 54.256311, X, Y) && !ellipse(15666.723282, 25341.133636, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17488.123825, 17016.244141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11973.724884, 27964.005219, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16782.484000, 20496.359800, 445.554413, 445.554413, 0.000000, X, Y) && !ellipse(16384.940567, 23768.557129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25798.817980, 27835.052800, 279.856808, 279.856808, 0.000000, X, Y) && !ellipse(27434.296960, 28718.009800, 780.501622, 780.501622, 0.000000, X, Y) && !ellipse(17792.419388, 29860.975861, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26535.298000, 29595.112000, 342.108810, 342.108810, 0.000000, X, Y) && !ellipse(25136.691071, 29961.495270, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28454.111400, 23801.891600, 347.144042, 347.144042, 0.000000, X, Y) && !ellipse(22142.429960, 23029.420000, 330.663210, 330.663210, 0.000000, X, Y) && !ellipse(24479.289886, 26240.715973, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23370.352380, 19960.972800, 463.485613, 463.485613, 0.000000, X, Y) && !ellipse(26153.466400, 27436.227875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24710.463287, 20572.953247, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27451.826172, 24622.311005, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19340.881600, 29076.651400, 484.920814, 484.920814, 0.000000, X, Y) && !ellipse(27312.997345, 25311.368103, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28855.630432, 28742.218201, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23081.987793, 26842.218170, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27074.628815, 33220.246368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29127.839966, 28105.911224, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26127.178955, 29278.871307, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24646.856750, 21307.938370, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Apr  7 10:22:02 2012] Writing fullrun_mos2_xmm0505720301_pi300-10000_pass1_cl_src20.gif
[Sat Apr  7 10:29:59 2012] Mean detx,y = (6330.68, -5605.16) 
[Sat Apr  7 10:30:01 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Apr  7 10:31:25 2012] Binned source spectrum to 10 counts/bin
[Sat Apr  7 10:31:25 2012] Setting source spectrum file to fullrun_mos2_xmm0505720301_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Sat Apr  7 10:31:25 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505720301_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Sat Apr  7 11:46:05 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Apr  7 11:46:05 2012] rmf not generated due to insufficient counts
[Sat Apr  7 13:32:05 2012] Updating aperture counts using extracted products
[Sat Apr  7 13:32:05 2012] Error reading totcts from fullrun_mos2_xmm0505720301_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Sat Apr  7 13:32:09 2012] Calculating source flux in energy range 0.30-8.00
[Sat Apr  7 13:32:09 2012] Using photon index=1.80, rate=0.066, arf fullrun_mos2_xmm0505720301_pi300-10000_pass1_cl_src20.arf
[Sat Apr  7 13:32:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Apr  7 13:32:09 2012] Updating source flux to 1.1e-12
[Sat Apr  7 13:45:27 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting