[Fri Apr  6 11:35:40 2012] Detection parameters:
  Position = (266.3, 308.9) = 0 43 4.20 41 16 0.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 100.5 +/- 16.2
  Background counts = 35.9
  Rate = 0.005 +/- 0.0007

[Fri Apr  6 11:35:41 2012] Off-axis axis estimate = 2.45'
[Fri Apr  6 15:40:02 2012] Using EEF radius (= 7.65 ")to estimate initial spatial extent for simple fitting
[Fri Apr  6 15:40:02 2012] Initial guess for spatial extent in simple fitting = 7.65"
[Fri Apr  6 15:40:02 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.979
[Fri Apr  6 15:40:02 2012] Giving source the simple spatial ID 67 for pass 0, mean size = 7.65"
[Fri Apr  6 18:15:07 2012] fullrun_mos1_xmm0505720301_pi300-10000_cl_pass0_src67.ximg exists
[Fri Apr  6 18:15:07 2012] fullrun_mos1_xmm0505720301_pi300-10000_cl_pass0_src67_1.ximg exists
[Fri Apr  6 18:15:07 2012] Fit fullrun_mos1_xmm0505720301_pi300-10000_cl_pass0_src67 appears to have run properly
[Fri Apr  6 18:15:08 2012] fullrun_mos1_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src67.ximg exists
[Fri Apr  6 18:15:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src67.csv
[Fri Apr  6 18:15:08 2012] fullrun_mos1_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src67_1.ximg exists
[Fri Apr  6 18:15:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src67.csv
[Fri Apr  6 18:15:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src67_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Apr  6 20:26:50 2012] Source 82 is offset by -2.521742 and -9.202567 pixels which is larger than
2 X fitted extent = 1.088253 x 1.088253, not incorporating fit results
[Fri Apr  6 20:26:50 2012] Vigneting correction estimate = 1.000000
[Fri Apr  6 20:26:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Apr  6 20:26:50 2012] Assessing source extent using major
[Fri Apr  6 20:26:50 2012] Source does appear to be extended
[Fri Apr  6 20:26:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Apr  6 23:19:30 2012] Using EEF radius (= 7.65 ")to estimate initial spatial extent for simple fitting
[Fri Apr  6 23:19:30 2012] Initial guess for spatial extent in simple fitting = 7.65"
[Fri Apr  6 23:19:30 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.979
[Fri Apr  6 23:19:30 2012] Giving source the simple spatial ID 64 for pass 1, mean size = 7.65"
[Sat Apr  7 01:30:59 2012] fullrun_mos1_xmm0505720301_pi300-10000_cl_pass1_src64.ximg exists
[Sat Apr  7 01:30:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720301_pi300-10000_cl_pass1_src64.csv
[Sat Apr  7 01:30:59 2012] fullrun_mos1_xmm0505720301_pi300-10000_cl_pass1_src64_1.ximg exists
[Sat Apr  7 01:30:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720301_pi300-10000_cl_pass1_src64.csv
[Sat Apr  7 01:30:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505720301_pi300-10000_cl_pass1_src64_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505720301_pi300-10000_cl_pass1_src64.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Apr  7 01:31:00 2012] fullrun_mos1_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src64.ximg exists
[Sat Apr  7 01:31:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src64.csv
[Sat Apr  7 01:31:00 2012] fullrun_mos1_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src64_1.ximg exists
[Sat Apr  7 01:31:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src64.csv
[Sat Apr  7 01:31:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src64_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src64.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Apr  7 03:24:57 2012] Warning: source 64 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 82 at 10.570954 pixels away
[Sat Apr  7 03:24:57 2012] Vigneting correction estimate = 1.000000
[Sat Apr  7 03:24:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Apr  7 03:24:57 2012] Assessing source extent using major
[Sat Apr  7 03:24:57 2012] Source does appear to be extended
[Sat Apr  7 03:24:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Apr  7 07:52:51 2012] XMMSAS src. selection expression = ellipse(23120.419342, 26824.408234, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Apr  7 07:52:51 2012] Writing source region out to fullrun_mos1_xmm0505720301_pi300-10000_pass1_cl_src82_src.reg
[Sat Apr  7 07:52:51 2012] Extracting stamp from image fullrun_mos1_xmm0505720301_pi300-10000_cl_sm2.00.img.gz, (229, 271) - (304, 346)
[Sat Apr  7 07:52:51 2012] XMMSAS bgd. selection expression = annulus(23120.419342, 26824.408234, 1087.500000, 2175.000000, X, Y) && !ellipse(21691.902480, 25484.045200, 429.787212, 429.787212, 0.000000, X, Y) && !ellipse(23383.274164, 26163.036268, 495.889737, 396.596282, 68.375665, X, Y) && !ellipse(25231.132800, 26910.191300, 346.558410, 346.558410, 0.000000, X, Y) && !ellipse(23226.628600, 29346.544600, 419.527212, 419.527212, 0.000000, X, Y) && !ellipse(24121.206200, 26962.756400, 374.517611, 374.517611, 0.000000, X, Y) && !ellipse(24490.648102, 26236.744049, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Apr  7 07:52:51 2012] Writing fullrun_mos1_xmm0505720301_pi300-10000_pass1_cl_src82.gif
[Sat Apr  7 08:09:02 2012] Mean detx,y = (-1837.26, -4067.03) 
[Sat Apr  7 08:09:02 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Apr  7 08:09:07 2012] Binned source spectrum to 10 counts/bin
[Sat Apr  7 08:09:07 2012] Setting source spectrum file to fullrun_mos1_xmm0505720301_pi300-10000_pass1_cl_src82_src_b10.pi.gz
[Sat Apr  7 08:09:07 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505720301_pi300-10000_pass1_cl_src82_bgd.pi.gz
[Sat Apr  7 10:21:06 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Apr  7 10:21:06 2012] rmf not generated due to insufficient counts
[Sat Apr  7 13:31:57 2012] Updating aperture counts using extracted products
[Sat Apr  7 13:31:57 2012] Error reading totcts from fullrun_mos1_xmm0505720301_pi300-10000_pass1_cl_src82_src_b10.pi.gz
[Sat Apr  7 13:32:03 2012] Calculating source flux in energy range 0.30-8.00
[Sat Apr  7 13:32:03 2012] Using photon index=1.80, rate=0.00464, arf fullrun_mos1_xmm0505720301_pi300-10000_pass1_cl_src82.arf
[Sat Apr  7 13:32:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Apr  7 13:32:03 2012] Updating source flux to 5.8e-14
[Sat Apr  7 13:32:15 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting