[Fri Apr 6 11:35:40 2012] Detection parameters: Position = (338.9, 325.8) = 0 42 36.20 41 17 9.0 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 64.5 +/- 14.6 Background counts = 30.3 Rate = 0.003 +/- 0.0006 [Fri Apr 6 11:35:41 2012] Off-axis axis estimate = 3.54' [Fri Apr 6 15:40:02 2012] Using EEF radius (= 8.20 ")to estimate initial spatial extent for simple fitting [Fri Apr 6 15:40:02 2012] Initial guess for spatial extent in simple fitting = 8.20" [Fri Apr 6 15:40:02 2012] source mask rpix=1.9, npix_max = 22, mask sum = 17, frac = 0.747 [Fri Apr 6 15:40:02 2012] Giving source the simple spatial ID 77 for pass 0, mean size = 8.20" [Fri Apr 6 18:15:07 2012] fullrun_mos1_xmm0505720301_pi300-10000_cl_pass0_src77.ximg exists [Fri Apr 6 18:15:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720301_pi300-10000_cl_pass0_src77.csv [Fri Apr 6 18:15:07 2012] fullrun_mos1_xmm0505720301_pi300-10000_cl_pass0_src77_1.ximg exists [Fri Apr 6 18:15:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720301_pi300-10000_cl_pass0_src77.csv [Fri Apr 6 18:15:07 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0505720301_pi300-10000_cl_pass0_src77_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0505720301_pi300-10000_cl_pass0_src77.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri Apr 6 18:15:08 2012] fullrun_mos1_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src77.ximg exists [Fri Apr 6 18:15:08 2012] fullrun_mos1_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src77_1.ximg exists [Fri Apr 6 18:15:08 2012] Fit fullrun_mos1_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src77 appears to have run properly [Fri Apr 6 20:26:50 2012] Source 79 is offset by 0.949221 and 3.749265 pixels which is larger than 2 X fitted extent = 0.883816 x 0.883816, not incorporating fit results [Fri Apr 6 20:26:50 2012] Source 79 is offset by 3.084302 and 3.380093 pixels which is larger than 2 X fitted extent = 0.942418 x 0.942418, not incorporating fit results [Fri Apr 6 20:26:50 2012] Vigneting correction estimate = 1.000000 [Fri Apr 6 20:26:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri Apr 6 20:26:50 2012] Assessing source extent using major [Fri Apr 6 20:26:50 2012] Source does appear to be extended [Fri Apr 6 20:26:50 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Fri Apr 6 23:19:30 2012] Using EEF radius (= 8.20 ")to estimate initial spatial extent for simple fitting [Fri Apr 6 23:19:30 2012] Initial guess for spatial extent in simple fitting = 8.20" [Fri Apr 6 23:19:30 2012] source mask rpix=1.9, npix_max = 22, mask sum = 17, frac = 0.747 [Fri Apr 6 23:19:30 2012] Giving source the simple spatial ID 70 for pass 1, mean size = 8.20" [Sat Apr 7 01:30:59 2012] fullrun_mos1_xmm0505720301_pi300-10000_cl_pass1_src70.ximg exists [Sat Apr 7 01:30:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720301_pi300-10000_cl_pass1_src70.csv [Sat Apr 7 01:30:59 2012] fullrun_mos1_xmm0505720301_pi300-10000_cl_pass1_src70_1.ximg exists [Sat Apr 7 01:30:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720301_pi300-10000_cl_pass1_src70.csv [Sat Apr 7 01:30:59 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0505720301_pi300-10000_cl_pass1_src70_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0505720301_pi300-10000_cl_pass1_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Apr 7 01:31:00 2012] fullrun_mos1_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src70.ximg exists [Sat Apr 7 01:31:00 2012] fullrun_mos1_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src70_1.ximg exists [Sat Apr 7 01:31:00 2012] Fit fullrun_mos1_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src70 appears to have run properly [Sat Apr 7 03:24:57 2012] Spatial fit model total counts = 1006.290000, observed total counts = 951.000000 [Sat Apr 7 03:24:57 2012] Offset between fit and detection position for source 79 = 9.157005 pixels [Sat Apr 7 03:24:57 2012] 933.482200 total counts/ 843.891000 bgd. counts: snr = 3.084055 Spatial fit parameters: Offset between fit and detection position for source 79 = 9.157005 pixels Position = (344.4, 333.1) = 0 42 34.08 41 17 43.5 Extent = 16.4 (16.4-32.8)", rotation angle = 0 Source counts = 89.6 +/- 30.6 Background counts = 843.9 Rate = 0.003 +/- 0.001 [Sat Apr 7 03:24:57 2012] Vigneting correction estimate = 1.000000 [Sat Apr 7 03:24:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Apr 7 03:24:57 2012] Assessing source extent using major axis lower bound [Sat Apr 7 03:24:57 2012] Source does appear to be extended [Sat Apr 7 03:24:57 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Apr 7 07:52:51 2012] XMMSAS src. selection expression = ellipse(29912.056000, 28935.064000, 983.886028, 983.886028, 0.000000, X, Y) [Sat Apr 7 07:52:51 2012] Writing source region out to fullrun_mos1_xmm0505720301_pi300-10000_pass1_cl_src79_src.reg [Sat Apr 7 07:52:51 2012] Extracting stamp from image fullrun_mos1_xmm0505720301_pi300-10000_cl_sm2.00.img.gz, (288, 277) - (401, 390) [Sat Apr 7 07:52:51 2012] XMMSAS bgd. selection expression = annulus(29912.056000, 28935.064000, 1639.810047, 3279.620094, X, Y) && !ellipse(28911.087840, 26915.333200, 410.443212, 410.443212, 0.000000, X, Y) && !ellipse(26713.198400, 26132.244000, 554.944016, 554.944016, 0.000000, X, Y) && !ellipse(27626.463720, 27015.961200, 405.773612, 405.773612, 0.000000, X, Y) && !ellipse(26997.645180, 27337.752600, 578.251217, 358.326410, 76.347000, X, Y) && !ellipse(30598.724200, 27275.085200, 404.276012, 354.920010, 10.948500, X, Y) && !ellipse(32436.928400, 26342.109600, 324.518409, 324.518409, 0.000000, X, Y) && !ellipse(27673.854400, 26967.426600, 1110.280032, 440.016013, 40.893000, X, Y) && !ellipse(32779.846039, 26894.339050, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30585.814789, 31210.436981, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28089.925200, 25312.570600, 425.432812, 425.432812, 0.000000, X, Y) && !ellipse(28531.983000, 30141.495600, 373.602411, 373.602411, 0.000000, X, Y) && !ellipse(29678.550800, 31753.964800, 406.307212, 406.307212, 0.000000, X, Y) && !ellipse(27426.576800, 28537.514000, 469.890414, 469.890414, 0.000000, X, Y) && !ellipse(29977.353760, 27251.769714, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31762.175964, 30745.477631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26520.893250, 29562.131073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28691.490000, 25062.091200, 1258.232036, 1258.232036, 0.000000, X, Y) && !ellipse(26246.734924, 28033.779388, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33773.230560, 25802.243195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28255.907104, 32919.312073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26516.111542, 28827.603943, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27484.849426, 25108.513245, 870.000000, 870.000000, 0.000000, X, Y) [Sat Apr 7 07:52:51 2012] Writing fullrun_mos1_xmm0505720301_pi300-10000_pass1_cl_src79.gif [Sat Apr 7 08:09:45 2012] Mean detx,y = (2723.04, 1126.76) [Sat Apr 7 08:09:45 2012] Setting backscal keywords in source and bgd. spectrum [Sat Apr 7 08:09:53 2012] Binned source spectrum to 10 counts/bin [Sat Apr 7 08:09:53 2012] Setting source spectrum file to fullrun_mos1_xmm0505720301_pi300-10000_pass1_cl_src79_src_b10.pi.gz [Sat Apr 7 08:09:53 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505720301_pi300-10000_pass1_cl_src79_bgd.pi.gz [Sat Apr 7 10:21:39 2012] Not generating rmf since there are only 89 counts [Sat Apr 7 10:21:39 2012] rmf not generated due to insufficient counts [Sat Apr 7 13:31:58 2012] Updating aperture counts using extracted products [Sat Apr 7 13:31:58 2012] Error reading totcts from fullrun_mos1_xmm0505720301_pi300-10000_pass1_cl_src79_src_b10.pi.gz [Sat Apr 7 13:32:03 2012] Calculating source flux in energy range 0.30-8.00 [Sat Apr 7 13:32:03 2012] Using photon index=1.80, rate=0.00334, arf fullrun_mos1_xmm0505720301_pi300-10000_pass1_cl_src79.arf [Sat Apr 7 13:32:03 2012] Assuming count rate is from the 0.30-10.00 bandpass [Sat Apr 7 13:32:04 2012] Updating source flux to 3.3e-14 [Sat Apr 7 13:32:15 2012] Flag b found in src. 79 procflags, skipping spectral fitting [Sat Apr 7 13:32:15 2012] Source 79 has fewer than 100.000000 counts, skipping spectral fitting