[Fri Apr  6 11:35:39 2012] Detection parameters:
  Position = (401.3, 336.2) = 0 42 12.09 41 17 57.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 214.3 +/- 19.1
  Background counts = 16.6
  Rate = 0.01 +/- 0.0009

[Fri Apr  6 11:35:41 2012] Off-axis axis estimate = 7.95'
[Fri Apr  6 15:40:02 2012] Using EEF radius (= 10.40 ")to estimate initial spatial extent for simple fitting
[Fri Apr  6 15:40:02 2012] Initial guess for spatial extent in simple fitting = 10.40"
[Fri Apr  6 15:40:02 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.077
[Fri Apr  6 15:40:02 2012] Giving source the simple spatial ID 45 for pass 0, mean size = 10.40"
[Fri Apr  6 18:15:06 2012] fullrun_mos1_xmm0505720301_pi300-10000_cl_pass0_src45.ximg exists
[Fri Apr  6 18:15:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720301_pi300-10000_cl_pass0_src45.csv
[Fri Apr  6 18:15:06 2012] fullrun_mos1_xmm0505720301_pi300-10000_cl_pass0_src45_1.ximg exists
[Fri Apr  6 18:15:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720301_pi300-10000_cl_pass0_src45.csv
[Fri Apr  6 18:15:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505720301_pi300-10000_cl_pass0_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505720301_pi300-10000_cl_pass0_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Apr  6 18:15:07 2012] fullrun_mos1_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src45.ximg exists
[Fri Apr  6 18:15:07 2012] fullrun_mos1_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src45_1.ximg exists
[Fri Apr  6 18:15:07 2012] Fit fullrun_mos1_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src45 appears to have run properly
[Fri Apr  6 20:26:50 2012] Warning, spatial fit 45 centroid is now closest to src. 18
[Fri Apr  6 20:26:50 2012] Vigneting correction estimate = 1.000000
[Fri Apr  6 20:26:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Apr  6 20:26:50 2012] Assessing source extent using major
[Fri Apr  6 20:26:50 2012] Source does appear to be extended
[Fri Apr  6 20:26:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Apr  6 23:19:30 2012] Using EEF radius (= 10.40 ")to estimate initial spatial extent for simple fitting
[Fri Apr  6 23:19:30 2012] Initial guess for spatial extent in simple fitting = 10.40"
[Fri Apr  6 23:19:30 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.077
[Fri Apr  6 23:19:30 2012] Giving source the simple spatial ID 44 for pass 1, mean size = 10.40"
[Sat Apr  7 01:30:59 2012] fullrun_mos1_xmm0505720301_pi300-10000_cl_pass1_src44.ximg exists
[Sat Apr  7 01:30:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720301_pi300-10000_cl_pass1_src44.csv
[Sat Apr  7 01:30:59 2012] fullrun_mos1_xmm0505720301_pi300-10000_cl_pass1_src44_1.ximg exists
[Sat Apr  7 01:30:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720301_pi300-10000_cl_pass1_src44.csv
[Sat Apr  7 01:30:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505720301_pi300-10000_cl_pass1_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505720301_pi300-10000_cl_pass1_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Apr  7 01:31:00 2012] fullrun_mos1_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src44.ximg exists
[Sat Apr  7 01:31:00 2012] fullrun_mos1_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src44_1.ximg exists
[Sat Apr  7 01:31:00 2012] Fit fullrun_mos1_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src44 appears to have run properly
[Sat Apr  7 03:24:57 2012] Source 48 is offset by 8.584243 and -3.504532 pixels which is larger than
2 X fitted extent = 0.656023 x 0.656023, not incorporating fit results
[Sat Apr  7 03:24:57 2012] Spatial fit model total counts = 806.414000, observed total counts = 866.000000
[Sat Apr  7 03:24:57 2012] Offset between fit and detection position for source 48 = 2.365156 pixels
[Sat Apr  7 03:24:57 2012] 831.228000 total counts/ 562.993000 bgd. counts: snr = 11.304828
Spatial fit parameters:
  Offset between fit and detection position for source 48 = 2.365156 pixels
  Position = (402.6, 334.3) = 0 42 11.59 41 17 48.0
  Extent = 12.8 (12.8-12.8)", rotation angle = 0
  Source counts = 268.2 +/- 28.8
  Background counts = 563.0
  Rate = 0.01 +/- 0.001
[Sat Apr  7 03:24:57 2012] Vigneting correction estimate = 1.000000
[Sat Apr  7 03:24:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Apr  7 03:24:57 2012] Assessing source extent using major axis lower bound
[Sat Apr  7 03:24:57 2012] Source does appear to be extended
[Sat Apr  7 03:24:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Apr  7 07:52:51 2012] XMMSAS src. selection expression = ellipse(34979.939600, 29032.528000, 767.034022, 767.034022, 0.000000, X, Y)
[Sat Apr  7 07:52:51 2012] Writing source region out to fullrun_mos1_xmm0505720301_pi300-10000_pass1_cl_src48_src.reg
[Sat Apr  7 07:52:51 2012] Extracting stamp from image fullrun_mos1_xmm0505720301_pi300-10000_cl_sm2.00.img.gz, (359, 290) - (447, 378)
[Sat Apr  7 07:52:51 2012] XMMSAS bgd. selection expression = annulus(34979.939600, 29032.528000, 1278.390037, 2556.780074, X, Y) && !ellipse(34651.348000, 29940.750000, 456.592013, 456.592013, 0.000000, X, Y) && !ellipse(32436.928400, 26342.109600, 324.518409, 324.518409, 0.000000, X, Y) && !ellipse(32779.846039, 26894.339050, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35926.010620, 29422.184479, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31762.175964, 30745.477631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34143.708038, 32296.867004, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33773.230560, 25802.243195, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Apr  7 07:52:51 2012] Writing fullrun_mos1_xmm0505720301_pi300-10000_pass1_cl_src48.gif
[Sat Apr  7 08:05:41 2012] Mean detx,y = (5050.69, 5701.22) 
[Sat Apr  7 08:05:42 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Apr  7 08:05:58 2012] Binned source spectrum to 10 counts/bin
[Sat Apr  7 08:05:58 2012] Setting source spectrum file to fullrun_mos1_xmm0505720301_pi300-10000_pass1_cl_src48_src_b10.pi.gz
[Sat Apr  7 08:05:58 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505720301_pi300-10000_pass1_cl_src48_bgd.pi.gz
[Sat Apr  7 13:31:56 2012] Updating aperture counts using extracted products
[Sat Apr  7 13:31:56 2012] Error reading totcts from fullrun_mos1_xmm0505720301_pi300-10000_pass1_cl_src48_src_b10.pi.gz
[Sat Apr  7 13:32:01 2012] Calculating source flux in energy range 0.30-8.00
[Sat Apr  7 13:32:01 2012] Using photon index=1.80, rate=0.00999, arf fullrun_mos1_xmm0505720301_pi300-10000_pass1_cl_src48.arf
[Sat Apr  7 13:32:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Apr  7 13:32:01 2012] Updating source flux to 1.4e-13
[Sat Apr  7 13:32:15 2012] Flag b found in src. 48 procflags, skipping spectral fitting