[Fri Apr  6 11:35:38 2012] Detection parameters:
  Position = (269.4, 301.2) = 0 43 3.02 41 15 25.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2706.6 +/- 63.4
  Background counts = 37.8
  Rate = 0.1 +/- 0.003

[Fri Apr  6 11:35:41 2012] Off-axis axis estimate = 2.12'
[Fri Apr  6 15:40:02 2012] Using EEF radius (= 7.49 ")to estimate initial spatial extent for simple fitting
[Fri Apr  6 15:40:02 2012] Initial guess for spatial extent in simple fitting = 7.49"
[Fri Apr  6 15:40:02 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.013
[Fri Apr  6 15:40:02 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 7.49"
[Fri Apr  6 18:15:06 2012] fullrun_mos1_xmm0505720301_pi300-10000_cl_pass0_src5.ximg exists
[Fri Apr  6 18:15:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720301_pi300-10000_cl_pass0_src5.csv
[Fri Apr  6 18:15:06 2012] fullrun_mos1_xmm0505720301_pi300-10000_cl_pass0_src5_1.ximg exists
[Fri Apr  6 18:15:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720301_pi300-10000_cl_pass0_src5.csv
[Fri Apr  6 18:15:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505720301_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505720301_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Apr  6 18:15:07 2012] fullrun_mos1_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Fri Apr  6 18:15:07 2012] fullrun_mos1_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Fri Apr  6 18:15:07 2012] Fit fullrun_mos1_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Fri Apr  6 20:26:50 2012] Spatial fit model total counts = 2871.740000, observed total counts = 2875.000000
[Fri Apr  6 20:26:50 2012] Offset between fit and detection position for source 4 = 0.112699 pixels
[Fri Apr  6 20:26:50 2012] 2906.820000 total counts/ 1023.140000 bgd. counts: snr = 58.889734
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.112699 pixels
  Position = (269.3, 301.3) = 0 43 3.03 41 15 24.9
  Extent = 5.6 (5.4-5.8)", rotation angle = 0
  Source counts = 1883.7 +/- 53.9
  Background counts = 1023.1
  Rate = 0.07 +/- 0.002
[Fri Apr  6 20:26:50 2012] Vigneting correction estimate = 1.000000
[Fri Apr  6 20:26:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Apr  6 20:26:50 2012] Assessing source extent using major axis lower bound
[Fri Apr  6 20:26:50 2012] Source does appear to be extended
[Fri Apr  6 20:26:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Apr  6 23:19:30 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Apr  6 23:19:30 2012] Initial guess for spatial extent in simple fitting = 5.59"
[Fri Apr  6 23:19:30 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.941
[Fri Apr  6 23:19:30 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 5.59"
[Sat Apr  7 01:30:59 2012] fullrun_mos1_xmm0505720301_pi300-10000_cl_pass1_src5.ximg exists
[Sat Apr  7 01:30:59 2012] fullrun_mos1_xmm0505720301_pi300-10000_cl_pass1_src5_1.ximg exists
[Sat Apr  7 01:30:59 2012] Fit fullrun_mos1_xmm0505720301_pi300-10000_cl_pass1_src5 appears to have run properly
[Sat Apr  7 01:30:59 2012] fullrun_mos1_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sat Apr  7 01:30:59 2012] fullrun_mos1_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sat Apr  7 01:30:59 2012] Fit fullrun_mos1_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Sat Apr  7 03:24:57 2012] Spatial fit model total counts = 2941.830000, observed total counts = 2875.000000
[Sat Apr  7 03:24:57 2012] Offset between fit and detection position for source 4 = 0.007926 pixels
[Sat Apr  7 03:24:57 2012] 2977.820000 total counts/ 1030.110000 bgd. counts: snr = 60.685159
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.007926 pixels
  Position = (269.3, 301.3) = 0 43 3.04 41 15 24.9
  Extent = 6.2" x 5.0", rotation angle = 68
  Source counts = 1947.7 +/- 54.6
  Background counts = 1030.1
  Rate = 0.07 +/- 0.002
[Sat Apr  7 03:24:57 2012] Vigneting correction estimate = 1.000000
[Sat Apr  7 03:24:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Apr  7 03:24:57 2012] Assessing source extent using major
[Sat Apr  7 03:24:57 2012] Source does appear to be extended
[Sat Apr  7 03:24:57 2012] Computing asymmetry using major and minor axis, asym = 1.25
[Sat Apr  7 07:52:50 2012] Counts = 1947.710000, rescaling region sizes by 2.000000
[Sat Apr  7 07:52:50 2012] XMMSAS src. selection expression = ellipse(23383.274164, 26163.036268, 743.834606, 594.894424, 68.375665, X, Y)
[Sat Apr  7 07:52:50 2012] Writing source region out to fullrun_mos1_xmm0505720301_pi300-10000_pass1_cl_src4_src.reg
[Sat Apr  7 07:52:50 2012] Extracting stamp from image fullrun_mos1_xmm0505720301_pi300-10000_cl_sm2.00.img.gz, (227, 259) - (312, 344)
[Sat Apr  7 07:52:50 2012] XMMSAS bgd. selection expression = annulus(23383.274164, 26163.036268, 2479.448686, 4958.897372, X, Y) && !ellipse(26713.198400, 26132.244000, 554.944016, 554.944016, 0.000000, X, Y) && !ellipse(21691.902480, 25484.045200, 429.787212, 429.787212, 0.000000, X, Y) && !ellipse(27626.463720, 27015.961200, 405.773612, 405.773612, 0.000000, X, Y) && !ellipse(26997.645180, 27337.752600, 578.251217, 358.326410, 76.347000, X, Y) && !ellipse(25231.132800, 26910.191300, 346.558410, 346.558410, 0.000000, X, Y) && !ellipse(25777.002260, 30330.972400, 406.099212, 353.616810, 335.761900, X, Y) && !ellipse(25775.016900, 26438.630200, 274.555208, 274.555208, 0.000000, X, Y) && !ellipse(23226.628600, 29346.544600, 419.527212, 419.527212, 0.000000, X, Y) && !ellipse(24121.206200, 26962.756400, 374.517611, 374.517611, 0.000000, X, Y) && !ellipse(27673.854400, 26967.426600, 1110.280032, 440.016013, 40.893000, X, Y) && !ellipse(24171.415600, 30829.926600, 389.089611, 389.089611, 0.000000, X, Y) && !ellipse(27497.904205, 21605.816727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28089.925200, 25312.570600, 425.432812, 425.432812, 0.000000, X, Y) && !ellipse(28531.983000, 30141.495600, 373.602411, 373.602411, 0.000000, X, Y) && !ellipse(27426.576800, 28537.514000, 469.890414, 469.890414, 0.000000, X, Y) && !ellipse(25791.624990, 27822.641600, 315.321609, 315.321609, 0.000000, X, Y) && !ellipse(19609.259918, 24132.298798, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25139.340790, 30007.244080, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24533.779053, 21160.528488, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26520.893250, 29562.131073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28427.731200, 23786.506600, 342.687210, 342.687210, 0.000000, X, Y) && !ellipse(22182.778400, 23088.951600, 433.713612, 433.713612, 0.000000, X, Y) && !ellipse(27423.118800, 24568.629000, 292.470408, 292.470408, 0.000000, X, Y) && !ellipse(24490.648102, 26236.744049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28691.490000, 25062.091200, 1258.232036, 1258.232036, 0.000000, X, Y) && !ellipse(26246.734924, 28033.779388, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23120.419342, 26824.408234, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26516.111542, 28827.603943, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27484.849426, 25108.513245, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Apr  7 07:52:50 2012] Writing fullrun_mos1_xmm0505720301_pi300-10000_pass1_cl_src4.gif
[Sat Apr  7 07:53:57 2012] Mean detx,y = (-2121.17, -3798.27) 
[Sat Apr  7 07:53:58 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Apr  7 07:54:36 2012] Binned source spectrum to 10 counts/bin
[Sat Apr  7 07:54:36 2012] Setting source spectrum file to fullrun_mos1_xmm0505720301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sat Apr  7 07:54:36 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505720301_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sat Apr  7 13:31:54 2012] Updating aperture counts using extracted products
[Sat Apr  7 13:31:54 2012] Error reading totcts from fullrun_mos1_xmm0505720301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sat Apr  7 13:31:58 2012] Calculating source flux in energy range 0.30-8.00
[Sat Apr  7 13:31:58 2012] Using photon index=1.80, rate=0.0725, arf fullrun_mos1_xmm0505720301_pi300-10000_pass1_cl_src4.arf
[Sat Apr  7 13:31:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Apr  7 13:31:58 2012] Updating source flux to 8.7e-13