[Fri Apr  6 11:35:38 2012] Detection parameters:
  Position = (249.9, 293.3) = 0 43 10.53 41 14 51.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2835.5 +/- 64.3
  Background counts = 27.4
  Rate = 0.1 +/- 0.003

[Fri Apr  6 11:35:41 2012] Off-axis axis estimate = 3.54'
[Fri Apr  6 15:40:02 2012] Using EEF radius (= 8.20 ")to estimate initial spatial extent for simple fitting
[Fri Apr  6 15:40:02 2012] Initial guess for spatial extent in simple fitting = 8.20"
[Fri Apr  6 15:40:02 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.879
[Fri Apr  6 15:40:02 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 8.20"
[Fri Apr  6 18:15:06 2012] fullrun_mos1_xmm0505720301_pi300-10000_cl_pass0_src3.ximg exists
[Fri Apr  6 18:15:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720301_pi300-10000_cl_pass0_src3.csv
[Fri Apr  6 18:15:06 2012] fullrun_mos1_xmm0505720301_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Apr  6 18:15:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720301_pi300-10000_cl_pass0_src3.csv
[Fri Apr  6 18:15:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505720301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505720301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Apr  6 18:15:07 2012] fullrun_mos1_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Apr  6 18:15:07 2012] fullrun_mos1_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Apr  6 18:15:07 2012] Fit fullrun_mos1_xmm0505720301_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Apr  6 20:26:50 2012] Spatial fit model total counts = 2761.730000, observed total counts = 2758.000000
[Fri Apr  6 20:26:50 2012] Offset between fit and detection position for source 2 = 0.204818 pixels
[Fri Apr  6 20:26:50 2012] 2775.336000 total counts/ 738.236000 bgd. counts: snr = 74.974700
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.204818 pixels
  Position = (249.9, 293.5) = 0 43 10.53 41 14 50.9
  Extent = 5.4 (5.2-5.6)", rotation angle = 0
  Source counts = 2037.1 +/- 52.7
  Background counts = 738.2
  Rate = 0.08 +/- 0.002
[Fri Apr  6 20:26:50 2012] Vigneting correction estimate = 1.000000
[Fri Apr  6 20:26:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Apr  6 20:26:50 2012] Assessing source extent using major axis lower bound
[Fri Apr  6 20:26:50 2012] Source does appear to be extended
[Fri Apr  6 20:26:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Apr  6 23:19:30 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Apr  6 23:19:30 2012] Initial guess for spatial extent in simple fitting = 5.40"
[Fri Apr  6 23:19:30 2012] source mask rpix=1.2, npix_max = 12, mask sum = 12, frac = 0.990
[Fri Apr  6 23:19:30 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 5.40"
[Sat Apr  7 01:30:59 2012] fullrun_mos1_xmm0505720301_pi300-10000_cl_pass1_src3.ximg exists
[Sat Apr  7 01:30:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720301_pi300-10000_cl_pass1_src3.csv
[Sat Apr  7 01:30:59 2012] fullrun_mos1_xmm0505720301_pi300-10000_cl_pass1_src3_1.ximg exists
[Sat Apr  7 01:30:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720301_pi300-10000_cl_pass1_src3.csv
[Sat Apr  7 01:30:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505720301_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505720301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Apr  7 01:30:59 2012] fullrun_mos1_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sat Apr  7 01:30:59 2012] fullrun_mos1_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sat Apr  7 01:30:59 2012] Fit fullrun_mos1_xmm0505720301_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sat Apr  7 03:24:57 2012] Spatial fit model total counts = 2761.760000, observed total counts = 2758.000000
[Sat Apr  7 03:24:57 2012] Offset between fit and detection position for source 2 = 0.000297 pixels
[Sat Apr  7 03:24:57 2012] 2775.450000 total counts/ 741.750000 bgd. counts: snr = 74.672056
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.000297 pixels
  Position = (249.9, 293.5) = 0 43 10.53 41 14 50.9
  Extent = 5.4 (5.2-5.6)", rotation angle = 0
  Source counts = 2033.7 +/- 52.7
  Background counts = 741.8
  Rate = 0.08 +/- 0.002
[Sat Apr  7 03:24:57 2012] Vigneting correction estimate = 1.000000
[Sat Apr  7 03:24:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Apr  7 03:24:57 2012] Assessing source extent using major axis lower bound
[Sat Apr  7 03:24:57 2012] Source does appear to be extended
[Sat Apr  7 03:24:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Apr  7 07:52:50 2012] Counts = 2033.700000, rescaling region sizes by 2.000000
[Sat Apr  7 07:52:50 2012] XMMSAS src. selection expression = ellipse(21691.902480, 25484.045200, 644.680819, 644.680819, 0.000000, X, Y)
[Sat Apr  7 07:52:50 2012] Writing source region out to fullrun_mos1_xmm0505720301_pi300-10000_pass1_cl_src2_src.reg
[Sat Apr  7 07:52:50 2012] Extracting stamp from image fullrun_mos1_xmm0505720301_pi300-10000_cl_sm2.00.img.gz, (213, 256) - (287, 331)
[Sat Apr  7 07:52:50 2012] XMMSAS bgd. selection expression = annulus(21691.902480, 25484.045200, 2148.936062, 4297.872124, X, Y) && !ellipse(23383.274164, 26163.036268, 495.889737, 396.596282, 68.375665, X, Y) && !ellipse(25231.132800, 26910.191300, 346.558410, 346.558410, 0.000000, X, Y) && !ellipse(25775.016900, 26438.630200, 274.555208, 274.555208, 0.000000, X, Y) && !ellipse(23226.628600, 29346.544600, 419.527212, 419.527212, 0.000000, X, Y) && !ellipse(24121.206200, 26962.756400, 374.517611, 374.517611, 0.000000, X, Y) && !ellipse(16743.705383, 20470.256714, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25791.624990, 27822.641600, 315.321609, 315.321609, 0.000000, X, Y) && !ellipse(19609.259918, 24132.298798, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25139.340790, 30007.244080, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24533.779053, 21160.528488, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26520.893250, 29562.131073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22182.778400, 23088.951600, 433.713612, 433.713612, 0.000000, X, Y) && !ellipse(24490.648102, 26236.744049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17786.855800, 29830.524400, 509.766415, 509.766415, 0.000000, X, Y) && !ellipse(26246.734924, 28033.779388, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23120.419342, 26824.408234, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26516.111542, 28827.603943, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Apr  7 07:52:50 2012] Writing fullrun_mos1_xmm0505720301_pi300-10000_pass1_cl_src2.gif
[Sat Apr  7 07:53:21 2012] Mean detx,y = (-3400.07, -5108.18) 
[Sat Apr  7 07:53:22 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Apr  7 07:53:42 2012] Binned source spectrum to 10 counts/bin
[Sat Apr  7 07:53:42 2012] Setting source spectrum file to fullrun_mos1_xmm0505720301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Apr  7 07:53:42 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505720301_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat Apr  7 13:31:54 2012] Updating aperture counts using extracted products
[Sat Apr  7 13:31:54 2012] Error reading totcts from fullrun_mos1_xmm0505720301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Apr  7 13:31:58 2012] Calculating source flux in energy range 0.30-8.00
[Sat Apr  7 13:31:58 2012] Using photon index=1.80, rate=0.0757, arf fullrun_mos1_xmm0505720301_pi300-10000_pass1_cl_src2.arf
[Sat Apr  7 13:31:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Apr  7 13:31:58 2012] Updating source flux to 1e-12